FCC ID ABZ99FT4083

UHF 40W MOBILE RADIO

by Motorola Solutions, Inc.

Grantee Code: ABZ   Product Code: 99FT4083
Latest application date: 2009-04-24

FCC ID Device Details

FCC IDABZ99FT4083
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeABZ
Product Code99FT4083
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassUHF 40W MOBILE RADIO
Test FirmMotorola EMC Lab - Plantation, FL

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
450-512 MHzClass II permissive change or modification of presently authorized equipment2009-04-24
450-512 MHzOriginal Equipment2008-05-28

Exhibits

DocumentTypeAvailableFile
Exhibit 8a Users ManualUsers Manual2008-05-28PDF 1 MB
exhibit 8b User Safety ManualUsers Manual2008-05-28PDF 168.3 KB
exhibit 9 internal photosInternal Photos2008-06-29PDF 283.4 KB
exhibit 3 External PhotosExternal Photos2008-06-29PDF 299.7 KB
exhibit 2 ID Label InfoID Label/Location Info2008-05-28PDF 44.5 KB
exhibit 7B RF Test Unit photoTest Setup Photos2008-06-29PDF 29 KB
exhibit 7A Test Setup PhotosTest Setup Photos2008-05-28PDF 33.7 KB
TEST REPORTTest Report2009-04-24PDF 89.6 KB
exhibit 6 Test ReportsTest Report2008-05-28PDF 1.7 MB
COVER LETTERCover Letter(s)2009-04-24PDF 26.5 KB
Reply to correspondence 35371Cover Letter(s)2008-05-28PDF 31 KB
Request for 731 CorrectionCover Letter(s)2008-05-28PDF 30.9 KB
Request for extended frequenciesCover Letter(s)2008-05-28PDF 23.9 KB
Response to Correspondence 35401Cover Letter(s)2008-05-28PDF 31.4 KB
exhibit 13a Cover LetterCover Letter(s)2008-05-28PDF 31.7 KB
exhibit 13b Letter Requestion ConfidentialityCover Letter(s)2008-05-28PDF 31.7 KB
Exhibit 11B RF Exposure - only 512 MHz and below for FCC purposesRF Exposure Info2008-05-28PDF 1.5 MB
exhibit 11 RF exposure InformationRF Exposure Info2008-05-28PDF 11.1 KB

Application Information

Application IDlP2Lu4OdgDJFQAslf29Uhw==
Final Action Date2009-04-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025009739
Model99FT4083
Frequency Range450-512 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionUHF 40W MOBILE RADIO
Responsible PartyRobert Sarocka, Bob.Sarocka@motorolasolutions.com , 847-344-6075
Test FirmWilliam (Mac) Elliott, Motorola EMC Lab - Plantation, FL, fme001@motorola.com , 9547235480
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is rated conducted; maximum conducted output power is 48 W as allowed by 47 CFR 90.205(r). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.

Applications

Application IDDatePurpose
lP2Lu4OdgDJFQAslf29Uhw==2009-04-24Class II permissive change or modification of presently authorized equipment
5o+3bOLXOCAYjnyjh0LmIQ==2008-05-28Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
450-512 MHz401.5ppm16K0F3E9BB, EF
450-512 MHz401.5ppm11K0F3E90.21BB, EF
450-512 MHz401.5ppm7K60FXD90.21BB, EF
450-512 MHz401.5ppm7K60FXE90.21BB, EF

Grants

TCB Grant - Application lP2Lu4OdgDJFQAslf29Uhw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/24/2009

Application Dated: 04/24/2009
Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4083
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF 40W MOBILE RADIO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BB EF 90 450.0  -  512.0 40.0 1.5  PM 16K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 11K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXD
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXE

Output power listed is rated conducted; maximum conducted output power is 48 W as allowed by 47 CFR 90.205(r). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.

BB: Power output continuously variable from value listed to less than 0.5 watts.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application lP2Lu4OdgDJFQAslf29Uhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 04/24/2009

Application Dated: 04/24/2009
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4083
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF 40W MOBILE RADIO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BB EF 90 450.0  -  512.0 40.0 1.5  PM 16K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 11K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXD
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXE

Output power listed is rated conducted; maximum conducted output power is 48 W as allowed by 47 CFR 90.205(r). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.


BB: Power output continuously variable from value listed to less than 0.5 watts.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application 5o+3bOLXOCAYjnyjh0LmIQ==

This application does not exist.

EAS Grant - Application 5o+3bOLXOCAYjnyjh0LmIQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 05/28/2008

Application Dated: 03/31/2008
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4083
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF 40W Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BB EF 90 450.0  -  512.0 40.0 1.5  PM 16K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 11K0F3E
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXD
BB EF 90.210 450.0  -  512.0 40.0 1.5  PM 7K60FXE

Output power listed is rated conducted; maximum conducted output power is 48 W as allowed by 47 CFR 90.205(r). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.


BB: Power output continuously variable from value listed to less than 0.5 watts.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To:
Donna Tokarz, NPR Coordinator
Motorola, Inc.
1313 East Algonquin Rd.
Schaumburg, IL 60196