FCC ID ABZ99FT4085

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 02/21/2013 Application Dated: 02/21/2013

Motorola Solutions, Inc.

1301 East Algonquin Road

Schaumburg, IL 60196

Attention: Robert Sarocka

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ABZ99FT4085
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Digital Transmission System
Notes:	UHF Range 2 Mobile Radio w/GPS & BT

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.015

The antenna used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 1301 East Algonquin Road Schaumburg, IL 60196 United States

Date of Grant: 02/21/2013 Application Dated: 02/21/2013

Attention: Robert Sarocka

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ABZ99FT4085
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Digital Transmission System
Notes:	UHF Range 2 Mobile Radio w/GPS & BT
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.015

The antenna used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application FLdzb9TbqakeBUlSVjtATA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 02/21/2013 Application Dated: 02/21/2013

Motorola Solutions, Inc.

1301 East Algonquin Road

Schaumburg, IL 60196

Attention: Robert Sarocka

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ABZ99FT4085
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	UHF 40W Transmitter w/BT

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	11K0F3E
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60FXD
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60FXE
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1W
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1D
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1E

Output power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 1301 East Algonquin Road Schaumburg, IL 60196 United States

Date of Grant: 02/21/2013 Application Dated: 02/21/2013

Attention: Robert Sarocka

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ABZ99FT4085
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	UHF 40W Transmitter w/BT
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	11K0F3E
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60FXD
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60FXE
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1W
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1D
BC EF	22, 74, 90	450.0  -  512.0	40.0	1.5  PM	7K60F1E

Output power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: