FCC ID ACJ-TNPA6600
Wireless LAN MODULE
by Panasonic Corporation of North America
Grantee Code: ACJ Product Code: TNPA6600
Latest application date: 2018-02-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2018-02-09 |
| 2412-2462 MHz | Original Equipment | 2018-02-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2018-08-08 | PDF 584.5 KB |
| Internal photos | Internal Photos | 2018-08-08 | PDF 434 KB |
| External photos | External Photos | 2018-08-08 | PDF 176.5 KB |
| Label and label location | ID Label/Location Info | 2018-02-09 | PDF 295.9 KB |
| Test setup photos | Test Setup Photos | 2018-08-08 | PDF 944.6 KB |
| Test Report 2G4WLAN part 1 | Test Report | 2018-02-09 | PDF 4.4 MB |
| Test Report 2G4WLAN part 2 | Test Report | 2018-02-09 | PDF 1.8 MB |
| Test Report 5GWLAN part 1 | Test Report | 2018-02-09 | PDF 4.5 MB |
| Test Report 5GWLAN part 2 | Test Report | 2018-02-09 | PDF 5.4 MB |
| Test Report 5GWLAN part 3 | Test Report | 2018-02-09 | PDF 5.4 MB |
| Test Report 5GWLAN part 4 | Test Report | 2018-02-09 | PDF 1.1 MB |
| Test Report DFS | Test Report | 2018-02-09 | PDF 1.6 MB |
| Authorization letter of application | Cover Letter(s) | 2018-02-09 | PDF 53.3 KB |
| Confidentiality request letter(permanent) | Cover Letter(s) | 2018-02-09 | PDF 43.2 KB |
| Confidentiality request letter(short-term) | Cover Letter(s) | 2018-02-09 | PDF 44.6 KB |
| Modular approval request | Cover Letter(s) | 2018-02-09 | PDF 63.1 KB |
| RF exposure evaluation | RF Exposure Info | 2018-02-09 | PDF 119.8 KB |
| Block diagram Metadata only | Block Diagram | PDF 249.2 KB | |
| Schematic Metadata only | Schematics | PDF 285.7 KB | |
| Declaration of software security requirement Metadata only | Operational Description | PDF 73.4 KB | |
| Letter of declaration unii device Metadata only | Operational Description | PDF 30.4 KB | |
| Operation description Metadata only | Operational Description | PDF 414.1 KB |
Application Information
| Application ID | Kt9R5YjdaqhNQqZaj6VKvA== |
|---|---|
| Final Action Date | 2018-02-09 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0003762242 |
| Model | TNPA6600 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless LAN MODULE |
| Responsible Party | Ben Botros, Project Manager, Ben.Botros@us.panasonic.com  , 201-348-7760 |
| Test Firm | Sophia Huang, BTL Inc., sophia.huang@newbtl.com  , 86-769-83183000 |
| TCB Email | tcb-essen@cetecom.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/08/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum combined average conducted as indicated in the filing. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Kt9R5YjdaqhNQqZaj6VKvA== | 2018-02-09 | Original Equipment |
| 7TLoDM/3WfSdAijUjv4Cyg== | 2018-02-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Kt9R5YjdaqhNQqZaj6VKvA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 02/09/2018 Application Dated: 02/09/2018 |
| Panasonic Corporation of North America |
| Two Riverfront Plaza, 9th Floor |
| Newark, NJ 07102-5490 |
| Attention: Ben Botros , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ-TNPA6600 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0845 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0845 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0872 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0856 |
| Output Power listed is the maximum combined average conducted as indicated in the filing. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Kt9R5YjdaqhNQqZaj6VKvA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor Newark, NJ 07102-5490 United States |
Date of Grant: 02/09/2018 Application Dated: 02/09/2018 |
| Attention: Ben Botros , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ-TNPA6600 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0845 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0845 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0872 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0856 |
| Output Power listed is the maximum combined average conducted as indicated in the filing. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 02/09/2018 Application Dated: 02/09/2018 |
| Panasonic Corporation of North America |
| Two Riverfront Plaza, 9th Floor |
| Newark, NJ 07102-5490 |
| Attention: Ben Botros , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ-TNPA6600 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3028 |
| Output Power listed is the maximum combined peak conducted as indicated in the filing. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7TLoDM/3WfSdAijUjv4Cyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor Newark, NJ 07102-5490 United States |
Date of Grant: 02/09/2018 Application Dated: 02/09/2018 |
| Attention: Ben Botros , Project Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ-TNPA6600 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3028 |
| Output Power listed is the maximum combined peak conducted as indicated in the filing. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |