FCC ID ACJ9TGBT12A

Bluetooth Module

by Panasonic Corporation of North America

Grantee Code: ACJ   Product Code: 9TGBT12A
Latest application date: 2012-06-04

FCC ID Device Details

FCC IDACJ9TGBT12A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeACJ
Product Code9TGBT12A
Applicant BusinessPanasonic Corporation of North America 🇺🇸
Related Domains us.panasonic.com
Equipment ClassBluetooth Module
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2012-06-04
2402-2480 MHzOriginal Equipment2012-06-04

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-07-19PDF 48 KB
Internal PhotoInternal Photos2012-07-19PDF 82.8 KB
External PhotoExternal Photos2012-07-19PDF 69 KB
Label and Label LocationID Label/Location Info2012-06-04PDF 97.7 KB
BLE DTS Report photoTest Setup Photos2012-07-19PDF 435.9 KB
BLUETOOTH Report photoTest Setup Photos2012-07-19PDF 436.6 KB
BLE DTS ReportTest Report2012-06-04PDF 2.6 MB
BLUETOOTH ReportTest Report2012-06-04PDF 5.1 MB
Authorization LetterCover Letter(s)2012-06-04PDF 26.2 KB
FMA letterCover Letter(s)2012-06-04PDF 41.7 KB
Request for confidentiality letterCover Letter(s)2012-06-04PDF 27.1 KB
BLE DTS MPERF Exposure Info2012-06-04PDF 381.1 KB
BLUETOOTH MPERF Exposure Info2012-06-04PDF 380.6 KB

Application Information

Application IDyDr5+ctmxXkY1w9yZkxsNA==
Final Action Date2012-06-04
Application PurposeOriginal Equipment
Applicant FRN0007403181
Model9TGBT12A
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBluetooth Module
Responsible PartyRichard Mullen, Group Manager, Richard.Mullen@us.panasonic.com , 201-348-7758
AgentClaire Claire Claire, Compliance Certification Services, Claire.Hoque@ccsemc.com , (510) 771-1000
Technical ContactAliza Zaffar, Compliance Certification Services, aliza.zaffar@ccsemc.com , (510) 771-1000
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailcertnotice@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/19/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.

Applications

Application IDDatePurpose
yDr5+ctmxXkY1w9yZkxsNA==2012-06-04Original Equipment
ksRbQ4XwmfdPasM1uBxG8A==2012-06-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.006000015CCC
2402-2480 MHz0.043000015CCC

Grants

TCB Grant - Application yDr5+ctmxXkY1w9yZkxsNA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/04/2012

Application Dated: 06/04/2012
Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
 
Attention: Richard Mullen , Group Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGBT12A
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.043  

Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yDr5+ctmxXkY1w9yZkxsNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
United States
  Date of Grant: 06/04/2012

Application Dated: 06/04/2012
 
Attention: Richard Mullen , Group Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGBT12A
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.043  

Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ksRbQ4XwmfdPasM1uBxG8A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/04/2012

Application Dated: 06/04/2012
Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
 
Attention: Richard Mullen , Group Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGBT12A
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ksRbQ4XwmfdPasM1uBxG8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
United States
  Date of Grant: 06/04/2012

Application Dated: 06/04/2012
 
Attention: Richard Mullen , Group Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGBT12A
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  

Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: