FCC ID ACJ9TGWL15B

Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to update to new U-NII rules as documented in this filing. Module was installed into Panasonic FZ-M1 tablet computer using a reduced power table. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to install into Panasonic FZ-M1 tablet computer. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 0.97W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Stand-Alone and Simultaneous SAR values are: 0.97W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01

Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01

Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Class II permissive change to install into Panasonic FZ-M1 tablet computer using reduced power table as described in this filing. The highest reported SAR value under this filing is 1.19 W/Kg.

Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Highest reported Stand-Alone and Simultaneous SAR values are: 1.19W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.

Highest reported Stand-Alone and Simultaneous SAR values are: 0.01W/kg and 1.56W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.