FCC ID ACJ9TGWW12E2
Multi-band Radio Module
by Panasonic Corporation of North America
Grantee Code: ACJ Product Code: 9TGWW12E2
Latest application date: 2013-04-11
FCC ID Device Details
| FCC ID | ACJ9TGWW12E2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ACJ |
| Product Code | 9TGWW12E2 |
| Applicant Business | Panasonic Corporation of North America 🇺🇸 |
| Related Domains |  us.panasonic.com |
| Equipment Class | Multi-band Radio Module |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2013-04-11 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: ACJ9TGWW12E Grant Date: 09/27/2012 | 2012-12-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host Manual | Users Manual | 2013-04-11 | PDF 698.7 KB |
| Host Manual - WLAN and WWAN Information | Users Manual | 2013-04-11 | PDF 311.7 KB |
| Internal Photos of Host | Internal Photos | 2013-04-11 | PDF 499.5 KB |
| External Photos of Host | External Photos | 2013-04-11 | PDF 102.5 KB |
| External Photos | External Photos | 2012-12-21 | PDF 130.8 KB |
| Host Label | ID Label/Location Info | 2013-04-11 | PDF 21.8 KB |
| Label | ID Label/Location Info | 2012-12-21 | PDF 70.5 KB |
| SAR report test photos | Test Setup Photos | 2013-04-11 | PDF 200.3 KB |
| Radiated Power Calculations | Test Report | 2013-04-11 | PDF 31.6 KB |
| Attestation re proximity sensor and power reduction | Attestation Statements | 2013-04-11 | PDF 160.7 KB |
| Agent Authorization | Cover Letter(s) | 2013-04-11 | PDF 23.1 KB |
| C2PC Request | Cover Letter(s) | 2013-04-11 | PDF 44.7 KB |
| Confidentiaility Request | Cover Letter(s) | 2013-04-11 | PDF 25.8 KB |
| TCB Q&A | Cover Letter(s) | 2013-04-11 | PDF 169.7 KB |
| authorization letter | Cover Letter(s) | 2012-12-21 | PDF 125.5 KB |
| change ID letter | Cover Letter(s) | 2012-12-21 | PDF 151.5 KB |
| SAR - CDMA BC0 Plots | RF Exposure Info | 2013-04-11 | PDF 235.3 KB |
| SAR - CDMA BC1 Plots | RF Exposure Info | 2013-04-11 | PDF 238.4 KB |
| SAR - GSM 1900 Plots | RF Exposure Info | 2013-04-11 | PDF 180.5 KB |
| SAR - GSM 850 Plots | RF Exposure Info | 2013-04-11 | PDF 185.8 KB |
| SAR - Variability Plots | RF Exposure Info | 2013-04-11 | PDF 110.6 KB |
| SAR - W-CDMA Band II Plots | RF Exposure Info | 2013-04-11 | PDF 218.5 KB |
| SAR - W-CDMA Band IV Plots | RF Exposure Info | 2013-04-11 | PDF 156.2 KB |
| SAR - W-CDMA Band V Plots | RF Exposure Info | 2013-04-11 | PDF 158.6 KB |
| SAR - WiFi Plots | RF Exposure Info | 2013-04-11 | PDF 242.8 KB |
| SAR Calibration Certificate - Dipole 1003 | RF Exposure Info | 2013-04-11 | PDF 1,014.3 KB |
| SAR Calibration Certificate - Dipole 1053 | RF Exposure Info | 2013-04-11 | PDF 800.2 KB |
| SAR Calibration Certificate - Dipole 1077 | RF Exposure Info | 2013-04-11 | PDF 772.5 KB |
| SAR Calibration Certificate - Dipole 4d002 | RF Exposure Info | 2013-04-11 | PDF 781.1 KB |
| SAR Calibration Certificate - Dipole 4d117 | RF Exposure Info | 2013-04-11 | PDF 835.1 KB |
| SAR Calibration Certificate - Dipole 5d043 | RF Exposure Info | 2013-04-11 | PDF 813.3 KB |
| SAR Calibration Certificate - Dipole 5d140 | RF Exposure Info | 2013-04-11 | PDF 873.9 KB |
| SAR Calibration Certificate - Dipole 706 | RF Exposure Info | 2013-04-11 | PDF 901.6 KB |
| SAR Calibration Certificate - Probe 3686 | RF Exposure Info | 2013-04-11 | PDF 946.8 KB |
| SAR Calibration Certificate - Probe 3749 | RF Exposure Info | 2013-04-11 | PDF 621 KB |
| SAR Calibration Certificate - Probe 3751 | RF Exposure Info | 2013-04-11 | PDF 997.9 KB |
| SAR Calibration Certificate - Probe 3871 | RF Exposure Info | 2013-04-11 | PDF 951 KB |
| SAR Calibration Certificate - Probe 3885 | RF Exposure Info | 2013-04-11 | PDF 973.6 KB |
| SAR Report Rev C | RF Exposure Info | 2013-04-11 | PDF 1.7 MB |
| SAR plots - system check | RF Exposure Info | 2013-04-11 | PDF 734.6 KB |
| SAR report - colocated WLAN (report only) | RF Exposure Info | 2013-04-11 | PDF 982.3 KB |
Application Information
| Application ID | s0IfF3RXmMfswR/+l0RpLg== |
|---|---|
| Final Action Date | 2013-04-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003762242 |
| Model | 9TGWW12E2 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Multi-band Radio Module |
| Responsible Party | Richard Mullen, Group Manager, Richard.Mullen@us.panasonic.com , 201-348-7758 |
| Agent | Grace Grace Grace, UL CCS, grace.persons@ul.com  |
| Technical Contact | Grace Persons, UL CCS, grace.persons@ul.com , (510)771-1000 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1122 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/11/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | C2PC to allow use in specific tablet PC (Panasonic model FZ-G1) with portable rf exposure conditions and collocation with WLAN and Bluetooth transceiver. The highest radiated power measured in specific configurations shown in filing is Part 22 0.877W ERP, Part 24 1.27W EIRP, Part 27 0.231W EIRP. Power Output listed is Conducted. The maximum output power for all modes is reduced as described in this filing when the module is installed in this host PC. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee shall insure that the end user has no instructions to remove or install this module. SAR compliance for host-specific portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body and simultaneous transmission exposure conditions are 1.39 W/kg and 1.59 W/Kg respectively. This device is authorized for use only as a part of the specific system configuration; use in other or modified configurations, if any, requires application filing for Class II permissive change or new FCC ID. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| s0IfF3RXmMfswR/+l0RpLg== | 2013-04-11 | Class II permissive change or modification of presently authorized equipment |
| m+GCvFW6QBVhFB3OY+PlMQ== | 2012-12-21 | Change in identification of presently authorized equipment. Original FCC ID: ACJ9TGWW12E Grant Date: 09/27/2012 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 824.2-848.8 MHz | 2.01 | 2.5ppm | 248KGXW | 22H | BC |
| 824.2-848.8 MHz | 0.531 | 2.5ppm | 248KG7W | 22H | BC |
| 824.2-848.8 MHz | 0.531 | 2.5ppm | 248KGXW | 22H | BC |
| 824.7-848.31 MHz | 0.29 | 2.5ppm | 1M28F9W | 22H | BC |
| 826.4-846.6 MHz | 0.281 | 2.5ppm | 4M19F9W | 22H | BC |
| 1712.4-1752.6 MHz | 0.287 | 2.5ppm | 4M15F9W | 27 | BC |
| 1850.2-1909.8 MHz | 1.199 | 2.5ppm | 250KGXW | 24E | BC |
| 1850.2-1909.8 MHz | 0.537 | 2.5ppm | 245KGXW | 24E | BC |
| 1850.2-1909.8 MHz | 0.537 | 2.5ppm | 245KG7W | 24E | BC |
| 1851.25-1908.75 MHz | 0.287 | 2.5ppm | 1M28F9W | 24E | BC |
| 1852.4-1907.5 MHz | 0.294 | 2.5ppm | 4M19F9W | 24E | BC |
Grants
TCB Grant - Application s0IfF3RXmMfswR/+l0RpLg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/11/2013 Application Dated: 03/29/2013 |
| Panasonic Corporation of North America |
| Two Riverfront Plaza, 9th Floor |
| Newark, NJ 07102-5490 |
| Attention: Richard Mullen , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ9TGWW12E2 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Multi-band Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 2.01 | 2.5 PM | 248KGXW |
| BC | 22H | 824.2 - 848.8 | 0.531 | 2.5 PM | 248KGXW |
| BC | 22H | 826.4 - 846.6 | 0.281 | 2.5 PM | 4M19F9W |
| BC | 24E | 1850.2 - 1909.8 | 1.199 | 2.5 PM | 250KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.537 | 2.5 PM | 245KGXW |
| BC | 24E | 1852.4 - 1907.5 | 0.294 | 2.5 PM | 4M19F9W |
| BC | 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W |
| BC | 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M28F9W |
| BC | 27 | 1712.4 - 1752.6 | 0.287 | 2.5 PM | 4M15F9W |
| C2PC to allow use in specific tablet PC (Panasonic model FZ-G1) with portable rf exposure conditions and collocation with WLAN and Bluetooth transceiver. The highest radiated power measured in specific configurations shown in filing is Part 22 0.877W ERP, Part 24 1.27W EIRP, Part 27 0.231W EIRP. Power Output listed is Conducted. The maximum output power for all modes is reduced as described in this filing when the module is installed in this host PC. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee shall insure that the end user has no instructions to remove or install this module. SAR compliance for host-specific portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body and simultaneous transmission exposure conditions are 1.39 W/kg and 1.59 W/Kg respectively. This device is authorized for use only as a part of the specific system configuration; use in other or modified configurations, if any, requires application filing for Class II permissive change or new FCC ID. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application s0IfF3RXmMfswR/+l0RpLg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor Newark, NJ 07102-5490 United States |
Date of Grant: 04/11/2013 Application Dated: 03/29/2013 |
| Attention: Richard Mullen , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ9TGWW12E2 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Multi-band Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 2.01 | 2.5 PM | 248KGXW |
| BC | 22H | 824.2 - 848.8 | 0.531 | 2.5 PM | 248KGXW |
| BC | 22H | 826.4 - 846.6 | 0.281 | 2.5 PM | 4M19F9W |
| BC | 24E | 1850.2 - 1909.8 | 1.199 | 2.5 PM | 250KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.537 | 2.5 PM | 245KGXW |
| BC | 24E | 1852.4 - 1907.5 | 0.294 | 2.5 PM | 4M19F9W |
| BC | 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W |
| BC | 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M28F9W |
| BC | 27 | 1712.4 - 1752.6 | 0.287 | 2.5 PM | 4M15F9W |
| C2PC to allow use in specific tablet PC (Panasonic model FZ-G1) with portable rf exposure conditions and collocation with WLAN and Bluetooth transceiver. The highest radiated power measured in specific configurations shown in filing is Part 22 0.877W ERP, Part 24 1.27W EIRP, Part 27 0.231W EIRP. Power Output listed is Conducted. The maximum output power for all modes is reduced as described in this filing when the module is installed in this host PC. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee shall insure that the end user has no instructions to remove or install this module. SAR compliance for host-specific portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values for body and simultaneous transmission exposure conditions are 1.39 W/kg and 1.59 W/Kg respectively. This device is authorized for use only as a part of the specific system configuration; use in other or modified configurations, if any, requires application filing for Class II permissive change or new FCC ID. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/21/2012 Application Dated: 12/21/2012 |
| Panasonic Corporation of North America |
| Two Riverfront Plaza, 9th Floor |
| Newark, NJ 07102-5490 |
| Attention: Richard Mullen , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ9TGWW12E2 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Multi-band Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 2.01 | 2.5 PM | 248KGXW |
| BC | 22H | 824.2 - 848.8 | 0.531 | 2.5 PM | 248KG7W |
| BC | 22H | 826.4 - 846.6 | 0.281 | 2.5 PM | 4M19F9W |
| BC | 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W |
| BC | 24E | 1850.2 - 1909.8 | 1.199 | 2.5 PM | 250KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.537 | 2.5 PM | 245KG7W |
| BC | 24E | 1852.4 - 1907.5 | 0.294 | 2.5 PM | 4M19F9W |
| BC | 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M28F9W |
| BC | 27 | 1712.4 - 1752.6 | 0.287 | 2.5 PM | 4M15F9W |
| This Change of ID includes both MDM6600 and MDM6200 digital/RF variants, with and without CDMA 1xEV-DO as defined with the original filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application m+GCvFW6QBVhFB3OY+PlMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor Newark, NJ 07102-5490 United States |
Date of Grant: 12/21/2012 Application Dated: 12/21/2012 |
| Attention: Richard Mullen , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ACJ9TGWW12E2 |
| Name of Grantee: | Panasonic Corporation of North America |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Multi-band Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 2.01 | 2.5 PM | 248KGXW |
| BC | 22H | 824.2 - 848.8 | 0.531 | 2.5 PM | 248KG7W |
| BC | 22H | 826.4 - 846.6 | 0.281 | 2.5 PM | 4M19F9W |
| BC | 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W |
| BC | 24E | 1850.2 - 1909.8 | 1.199 | 2.5 PM | 250KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.537 | 2.5 PM | 245KG7W |
| BC | 24E | 1852.4 - 1907.5 | 0.294 | 2.5 PM | 4M19F9W |
| BC | 24E | 1851.25 - 1908.75 | 0.287 | 2.5 PM | 1M28F9W |
| BC | 27 | 1712.4 - 1752.6 | 0.287 | 2.5 PM | 4M15F9W |
| This Change of ID includes both MDM6600 and MDM6200 digital/RF variants, with and without CDMA 1xEV-DO as defined with the original filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |