1. FCC ID
  2. ACJ
  3. ACJ9TGWW13B2

FCC ID ACJ9TGWW13B2

Radio Module

by Panasonic Corporation of North America

Grantee Code: ACJ   Product Code: 9TGWW13B2
Latest application date: 2015-11-13

Device Images

FCC ID ACJ9TGWW13B2 External Photos
External Photos
FCC ID ACJ9TGWW13B2 External Photos
External Photos
FCC ID ACJ9TGWW13B2 External Photos
External Photos

FCC ID Device Details

FCC IDACJ9TGWW13B2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeACJ
Product Code9TGWW13B2
Applicant BusinessPanasonic Corporation of North America 🇺🇸
Related Domains us.panasonic.com
Equipment ClassRadio Module
Test FirmUL Japan, Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
704-716 MHzClass II permissive change or modification of presently authorized equipment2015-11-13
704-716 MHzChange in identification of presently authorized equipment. Original FCC ID: ACJ9TGWW13B Grant Date: 08/30/20132015-10-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-12-24PDF 2.4 MB
User Manual of Wireless CommuniationUsers Manual2015-12-24PDF 305.2 KB
Internal photosInternal Photos2015-12-24PDF 193.8 KB
Host External photos V1.1External Photos2015-12-24PDF 210.3 KB
WWAN Module Extenal photosExternal Photos2015-12-24PDF 156.4 KB
Host ID Label location InfoID Label/Location Info2015-11-13PDF 27.8 KB
Module_Label and lable locationID Label/Location Info2015-11-13PDF 94.3 KB
ACJ9TGWW13B2_LabelID Label/Location Info2015-10-15PDF 94.3 KB
WWAN SAR test setup photo (FCC) -R2Test Setup Photos2015-12-24PDF 2.4 MB
Radiated PWR_V0.1Test Report2015-11-13PDF 80 KB
Agent Authorization letter (C2PC for ACJ9TGWW13B2)Cover Letter(s)2015-11-13PDF 27.4 KB
C2PC request letter (C2PC for ACJ9TGWW13B2)Cover Letter(s)2015-11-13PDF 27.4 KB
Request for Confidentiality letter (C2PC for ACJ9TGWW13B2)Cover Letter(s)2015-11-13PDF 28.5 KB
Agent Authorization letter (Change in Identification ACJ9TGWW13B2)Cover Letter(s)2015-10-15PDF 24.3 KB
Application letter (Change in Identification ACJ9TGWW13B2)Cover Letter(s)2015-10-15PDF 101.4 KB
15.1 SAR system check plotsRF Exposure Info2015-11-13PDF 1.2 MB
15.10 SAR test plots for LTE Band 2RF Exposure Info2015-11-13PDF 853.1 KB
15.11 SAR test plots for LTE Band 4RF Exposure Info2015-11-13PDF 899.6 KB
15.12 SAR test plots for LTE Band 5RF Exposure Info2015-11-13PDF 803.7 KB
15.13 SAR test plots for LTE Band 25RF Exposure Info2015-11-13PDF 899.9 KB
15.14 SAR test plots for LTE Band 13RF Exposure Info2015-11-13PDF 563.8 KB
15.15 SAR test plots for LTE Band 17RF Exposure Info2015-11-13PDF 1.1 MB
15.16 SAR test plots for Repeat MeasurementRF Exposure Info2015-11-13PDF 201.7 KB
15.17 SAR test plots for Wi-Fi 2.4GHz bandRF Exposure Info2015-11-13PDF 131.1 KB
15.18 SAR test plots for Wi-Fi 5.3GHz bandRF Exposure Info2015-11-13PDF 132.6 KB
15.19 SAR test plots for Wi-Fi 5.5GHz bandRF Exposure Info2015-11-13PDF 134.5 KB
15.2 SAR test plots for GSM850RF Exposure Info2015-11-13PDF 586.5 KB
15.20 SAR test plots for Wi-Fi 5.8GHz bandRF Exposure Info2015-11-13PDF 132.7 KB
15.21 SAR test plots for BluetoothRF Exposure Info2015-11-13PDF 125.9 KB
15.22 SAR peak separation for SPLSRRF Exposure Info2015-11-13PDF 1.1 MB
15.23 Calibration Certificate for E-Field Probe EX3DV4 - SN 3917RF Exposure Info2015-11-13PDF 657.4 KB
15.24 Calibration Certificate for E-Field Probe EX3DV4 - SN 3922RF Exposure Info2015-11-13PDF 339.7 KB
15.25 Calibration Certificate for E-Field Probe EX3DV4 - SN 3825RF Exposure Info2015-11-13PDF 1,015.7 KB
15.26 SAR Calibration Certificate for D750V3 - SN 1058RF Exposure Info2015-11-13PDF 279.4 KB
15.27 SAR Calibration Certificate for D835V2 - SN 4d149RF Exposure Info2015-11-13PDF 1.9 MB
15.28 SAR Calibration Certificate for D1750V2 - SN 1089RF Exposure Info2015-11-13PDF 769.2 KB
15.29 SAR Calibration Certificate for D1900V2 - SN 5d169RF Exposure Info2015-11-13PDF 743.4 KB
15.3 SAR test plots for GSM1900RF Exposure Info2015-11-13PDF 469.8 KB
15.30 SAR Calibration Certificate for D2450V2 - SN 713RF Exposure Info2015-11-13PDF 1.5 MB
15.31 SAR Calibration Certificate for D5GHzV2 - SN 1020RF Exposure Info2015-11-13PDF 2.5 MB
15.32 SAR Tissue IngredientsRF Exposure Info2015-11-13PDF 870.4 KB
15.4 SAR test plots for WCDMA Band VRF Exposure Info2015-11-13PDF 412.5 KB
15.5 SAR test plots for WCDMA Band IVRF Exposure Info2015-11-13PDF 399.2 KB
15.6 SAR test plots for WCDMA Band IIRF Exposure Info2015-11-13PDF 388.4 KB
15.7 SAR test plots for CDMA Band 0RF Exposure Info2015-11-13PDF 822.5 KB
15.8 SAR test plots for CDMA Band 1RF Exposure Info2015-11-13PDF 900.8 KB
15.9 SAR test plots for CDMA Band 10RF Exposure Info2015-11-13PDF 717.1 KB
WWAN SAR Report (FCC) -R2RF Exposure Info2015-11-13PDF 2.6 MB
FCC Theory of Operation_WW13B_V1.4 Metadata onlyOperational DescriptionPDF 832 KB
proximitysensor for CF-20 Metadata onlyOperational DescriptionPDF 133.7 KB
Tune up Procedure of WWAN_V2.1 Metadata onlyParts List/Tune Up InfoPDF 62.2 KB

Application Information

Application IDIXJQp8Tpk0TkdUJkWOy/lw==
Final Action Date2015-11-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003762242
Model9TGWW13B2
Frequency Range704-716 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionRadio Module
Responsible PartyBen Botros, Project Manager, Ben.Botros@us.panasonic.com , 201-348-7760
Test FirmMitsuru Fujimura, UL Japan, Inc, mitsuru.fujimura@jp.ul.com , 81-596-24-8116
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/24/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to alternate Panasonic CF-20 table PC as described. The highest reported SAR for body-worn and simultaneous transmission use conditions are 1.34 W/Kg and 1.59 W/Kg respectively. Original Grant Comments on 08/30/2013 were: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.

Applications

Application IDDatePurpose
IXJQp8Tpk0TkdUJkWOy/lw==2015-11-13Class II permissive change or modification of presently authorized equipment
kcOIzjtDPYs5Hgtfsjc4Vw==2015-10-15Change in identification of presently authorized equipment. Original FCC ID: ACJ9TGWW13B Grant Date: 08/30/2013

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
704-716 MHz0.2062.5ppm4M48F9W27BC
704-716 MHz0.1962.5ppm9M08F9W27BC
777-787 MHz0.22.5ppm4M52F9W27BC
777-787 MHz0.1872.5ppm9M08F9W27BC
817-824 MHz0.2642.5ppm1M28F9W9BC
824-849 MHz0.1972.5ppm4M52F9W22HBC
824-849 MHz0.1952.5ppm9M04F9W22HBC
824-849 MHz0.2742.5ppm1M29F9W22HBC
824-849 MHz0.1972.5ppm4M18F9W22HBC
1710-1755 MHz0.22.5ppm4M20F9W27BC
1710-1755 MHz0.2182.5ppm4M48F9W27BC
1710-1755 MHz0.2172.5ppm9M04F9W27BC
1710-1755 MHz0.2182.5ppm13M4F9W27BC
1710-1755 MHz0.2142.5ppm17M9F9W27BC
1850-1910 MHz0.2222.5ppm4M52F9W24EBC
1850-1910 MHz0.2182.5ppm9M04F9W24EBC
1850-1910 MHz0.2192.5ppm13M5F9W24EBC
1850-1910 MHz0.2112.5ppm17M9F9W24EBC
1850-1915 MHz0.2232.5ppm4M50F9W24EBC
1850-1915 MHz0.2192.5ppm9M04F9W24EBC
1850-1915 MHz0.222.5ppm13M4F9W24EBC
1850-1915 MHz0.2182.5ppm17M9F9W24EBC
1850-1910 MHz0.912.5ppm244KGXW24EBC
1850-1910 MHz0.3812.5ppm240KG7W24EBC
1850-1910 MHz0.2732.5ppm1M28F9W24EBC
1850-1910 MHz0.2092.5ppm4M20F9W24EBC

Grants

TCB Grant - Application kcOIzjtDPYs5Hgtfsjc4Vw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 10/15/2015

Application Dated: 10/09/2015
Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
 
Attention: Ben Botros , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGWW13B2
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Original Grant Comments on 08/30/2013 were: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application kcOIzjtDPYs5Hgtfsjc4Vw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
United States 		  Date of Grant: 10/15/2015

Application Dated: 10/09/2015
 
Attention: Ben Botros , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGWW13B2
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Original Grant Comments on 08/30/2013 were: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application IXJQp8Tpk0TkdUJkWOy/lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/13/2015

Application Dated: 11/09/2015
Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
 
Attention: Ben Botros , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGWW13B2
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Class II permissive change to alternate Panasonic CF-20 table PC as described. The highest reported SAR for body-worn and simultaneous transmission use conditions are 1.34 W/Kg and 1.59 W/Kg respectively. Original Grant Comments on 08/30/2013 were: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application IXJQp8Tpk0TkdUJkWOy/lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Panasonic Corporation of North America
Two Riverfront Plaza, 9th Floor
Newark, NJ 07102-5490
United States 		  Date of Grant: 11/13/2015

Application Dated: 11/09/2015
 
Attention: Ben Botros , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACJ9TGWW13B2
Name of Grantee:  Panasonic Corporation of North America
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 824.0  -  849.0 1.841 2.5  PM 249KGXW
BC 22H 824.0  -  849.0 0.551 2.5  PM 240KG7W
BC 24E 1850.0  -  1910.0 0.91 2.5  PM 244KGXW
BC 24E 1850.0  -  1910.0 0.381 2.5  PM 240KG7W
BC 90 817.0  -  824.0 0.264 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.274 2.5  PM 1M29F9W
BC 24E 1850.0  -  1910.0 0.273 2.5  PM 1M28F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M18F9W
BC 24E 1850.0  -  1910.0 0.209 2.5  PM 4M20F9W
BC 27 1710.0  -  1755.0 0.2 2.5  PM 4M20F9W
BC 24E 1850.0  -  1910.0 0.222 2.5  PM 4M52F9W
BC 24E 1850.0  -  1910.0 0.218 2.5  PM 9M04F9W
BC 24E 1850.0  -  1910.0 0.219 2.5  PM 13M5F9W
BC 24E 1850.0  -  1910.0 0.211 2.5  PM 17M9F9W
BC 22H 824.0  -  849.0 0.197 2.5  PM 4M52F9W
BC 22H 824.0  -  849.0 0.195 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.223 2.5  PM 4M50F9W
BC 24E 1850.0  -  1915.0 0.219 2.5  PM 9M04F9W
BC 24E 1850.0  -  1915.0 0.22 2.5  PM 13M4F9W
BC 24E 1850.0  -  1915.0 0.218 2.5  PM 17M9F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 4M48F9W
BC 27 1710.0  -  1755.0 0.217 2.5  PM 9M04F9W
BC 27 1710.0  -  1755.0 0.218 2.5  PM 13M4F9W
BC 27 1710.0  -  1755.0 0.214 2.5  PM 17M9F9W
BC 27 704.0  -  716.0 0.206 2.5  PM 4M48F9W
BC 27 704.0  -  716.0 0.196 2.5  PM 9M08F9W
BC 27 777.0  -  787.0 0.2 2.5  PM 4M52F9W
BC 27 777.0  -  787.0 0.187 2.5  PM 9M08F9W

Class II permissive change to alternate Panasonic CF-20 table PC as described. The highest reported SAR for body-worn and simultaneous transmission use conditions are 1.34 W/Kg and 1.59 W/Kg respectively. Original Grant Comments on 08/30/2013 were: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: