FCC ID ACQSBG901

Wireless Cable Modem Gateway

by ARRIS Group, Inc.

Grantee Code: ACQ   Product Code: SBG901
Latest application date: 2009-06-15

FCC ID Device Details

FCC IDACQSBG901
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeACQ
Product CodeSBG901
Applicant BusinessARRIS Group, Inc. 🇺🇸
Related Domains motorola.com adt.com.tw
Equipment ClassWireless Cable Modem Gateway
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-06-15
2412-2462 MHzOriginal Equipment2008-12-09

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2008-12-09PDF 2.3 MB
Internal photosInternal Photos2009-06-15PDF 1 MB
Internal PhotosInternal Photos2008-12-09PDF 591.1 KB
External photosExternal Photos2009-06-15PDF 608.7 KB
External PhotosExternal Photos2008-12-09PDF 381.5 KB
Label and LocationID Label/Location Info2008-12-09PDF 164 KB
Test setup photosTest Setup Photos2009-06-15PDF 587.5 KB
Test Setup PhotosTest Setup Photos2008-12-09PDF 279.6 KB
Test reportTest Report2009-06-15PDF 350.5 KB
Test ReportTest Report2008-12-09PDF 544.6 KB
Description of changeCover Letter(s)2009-06-15PDF 30.6 KB
POACover Letter(s)2009-06-15PDF 23.8 KB
AgencyCover Letter(s)2008-12-09PDF 45.1 KB
Confidentiality RequestCover Letter(s)2008-12-09PDF 111.3 KB
RF Exposure InfoRF Exposure Info2008-12-09PDF 25.5 KB

Application Information

Application IDkrWyydOkFN1Tr2kbP6bHgA==
Final Action Date2009-06-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007379399
ModelSBG901
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Cable Modem Gateway
Responsible PartyMichael Welty, mwelty@motorola.com , 215-323-2117
Technical ContactGary Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, Gary_chang@adt.com.tw , 886-3-3183232
Non-Technical ContactEllis Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, ellis@adt.com.tw , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change filing for adding a diagnostic cable and two adapters.

Applications

Application IDDatePurpose
krWyydOkFN1Tr2kbP6bHgA==2009-06-15Class II permissive change or modification of presently authorized equipment
LGfm9ZqSGSt9YL48ZIz+fQ==2008-12-09Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.182000015C

Grants

TCB Grant - Application LGfm9ZqSGSt9YL48ZIz+fQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 12/09/2008

Application Dated: 12/09/2008
ARRIS Group, Inc.
101 Tournament Drive
Horsham, PA 19044
 
Attention: Michael Welty

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACQSBG901
Name of Grantee:  ARRIS Group, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Cable Modem Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.182  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application LGfm9ZqSGSt9YL48ZIz+fQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARRIS Group, Inc.
101 Tournament Drive
Horsham, PA 19044
United States
  Date of Grant: 12/09/2008

Application Dated: 12/09/2008
 
Attention: Michael Welty

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACQSBG901
Name of Grantee:  ARRIS Group, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Cable Modem Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.182  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application krWyydOkFN1Tr2kbP6bHgA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 06/15/2009

Application Dated: 06/15/2009
ARRIS Group, Inc.
101 Tournament Drive
Horsham, PA 19044
 
Attention: Michael Welty

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACQSBG901
Name of Grantee:  ARRIS Group, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Cable Modem Gateway
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.182  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change filing for adding a diagnostic cable and two adapters.


EAS Grant - Application krWyydOkFN1Tr2kbP6bHgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARRIS Group, Inc.
101 Tournament Drive
Horsham, PA 19044
United States
  Date of Grant: 06/15/2009

Application Dated: 06/15/2009
 
Attention: Michael Welty

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ACQSBG901
Name of Grantee:  ARRIS Group, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Cable Modem Gateway
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.182  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change filing for adding a diagnostic cable and two adapters.



Mail To: