FCC ID AFJ448000

This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26 (824-849 MHz, up to 10 MHz only for 814-824 MHz); 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14; 5 MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 71.

This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26 (824-849 MHz, up to 10 MHz only for 814-824 MHz); 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14; 5 MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 71.

Class II permissive change to integrate the AirPrime RC7611 LTE transceiver module into a portable host IP510H and is collocated with a Bluetooth transceiver module FCC ID: AFJ387300 and WLAN module FCC ID:AFJ448001 to transmit simultaneously. The IP510H SAR compliance for body-worn operating configurations is limited to the specific accessories tested for this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR value for head and body-worn accessories exposure conditions is 0.79W/kg when operating with simultaneous transmission.