FCC ID AK8BNSY25

FCC ID AK8BNSY25 External-Photos, AK8 BNSY25, AK8BNSY25, AK8BN5Y25, AK8BNSY2S

Sony Corporation Wireless Transceiver Module BNSY25

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: AK8BNSY25 is AK8. The remaining characters of the FCC ID, BNSY25, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Wireless Transceiver Module

FCC ID AK8BNSY25 External-Photos

*Please Check Individual Documents for more images

App # Purpose Date Unique ID
1 Original Equipment 2016-02-12 nLzMEjuhQfqVs0Lbd4x14w==
2 Original Equipment 2016-02-12 0tVMpfOSUIrq/44GROP19w==
3 Original Equipment 2016-02-12 hmZcNC4gMYeoG5fsEeH7UA==
4 Class II Permissive Change 2016-04-27 Nk84sMpFy38ff81EU03PUA==
5 Class II Permissive Change 2016-04-27 R415i51Le3JkvUEMi1CFVg==
6 Class II Permissive Change 2016-04-27 hssJvFKENgttbuBkBXcpQQ==
7 Class II Permissive Change 2019-03-03 xRAg0D3eCbDRNWg0V4ckRA==
8 Class II Permissive Change 2019-03-03 HEIWFWOnNC9JbTnmdGIvXw==
9 Class II Permissive Change 2019-03-03 0oxUV0ST5i7YpPU73EGddw==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.402-2.48 GHz Bluetooth5.9 mW15CCC 3.2
2.402-2.48 GHz Bluetooth5.8 mW15CCC 6.1
2.402-2.48 GHz Bluetooth5.8 mW15CCC 1.1
2.402-2.48 GHz Bluetooth5.9 mW15CCC 5.2
2.402-2.48 GHz Bluetooth5.9 mW15CCC 7.2
2.402-2.48 GHz Bluetooth5.8 mW15CCC 8.1
2.412-2.462 GHz 2.4 GHz WiFi386.4 mW15CCC 3.1
2.412-2.462 GHz 2.4 GHz WiFi386.4 mW15CCC 5.1
2.412-2.462 GHz 2.4 GHz WiFi386.4 mW15CCC 7.1
5.18-5.32 GHz 5 GHz WiFi21.9 mW15E38, CC, ND 2.1
5.18-5.32 GHz 5 GHz WiFi21.9 mW15E38, CC, ND 4.1
5.18-5.32 GHz 5 GHz WiFi21.9 mW15E38, CC, ND 9.3
5.5-5.7 GHz 5 GHz WiFi20.7 mW15E38, CC, ND 2.2
5.5-5.7 GHz 5 GHz WiFi20.7 mW15E38, CC, ND 4.2
5.5-5.7 GHz 5 GHz WiFi20.7 mW15E38, CC, ND 9.2
5.745-5.825 GHz 5 GHz WiFi20.4 mW15E38, CC 2.3
5.745-5.825 GHz 5 GHz WiFi20.4 mW15E38, CC 4.3
5.745-5.825 GHz 5 GHz WiFi20.4 mW15E38, CC 9.1

Exhibits

Available Exhibits

App #Document Type Submitted
Available
9 03 FCC Test Report_NII-3Test Report
Adobe Acrobat PDF (1994 kB)
2019-03-03
2019-03-03
9 03 FCC Test Report_NII-2Test Report
Adobe Acrobat PDF (3978 kB)
2019-03-03
2019-03-03
9 03 FCC Test Report_NII-1Test Report
Adobe Acrobat PDF (3882 kB)
2019-03-03
2019-03-03
9 04 External PhotoExternal Photos
Adobe Acrobat PDF (278 kB)
2019-03-01
2019-03-03
9 03 FCC Test Setup Photo_NIITest Setup Photos
Adobe Acrobat PDF (720 kB)
2019-03-01
2019-03-03
9 03 FCC RF Exposure_NIIRF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01
2019-03-03
9 02 FCC Special Power of AttorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01
2019-03-03
9 02 FCC Request for Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01
2019-03-03
9 02 FCC Class II Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01
2019-03-03
9 02 FCC Authorization LetterCover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01
2019-03-03
7 04 External PhotoExternal Photos
Adobe Acrobat PDF (278 kB)
2019-03-01
2019-03-03
7 03 FCC Test Setup Photo_DTS_WLANTest Setup Photos
Adobe Acrobat PDF (770 kB)
2019-03-01
2019-03-03
7 03 FCC Test Setup Photo_DTS_BLETest Setup Photos
Adobe Acrobat PDF (713 kB)
2019-03-01
2019-03-03
7 03 FCC Test Report_DTS_WLANTest Report
Adobe Acrobat PDF (4054 kB)
2019-03-01
2019-03-03
7 03 FCC Test Report_DTS_BLETest Report
Adobe Acrobat PDF (1737 kB)
2019-03-01
2019-03-03
7 03 FCC RF Exposure_DTSRF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01
2019-03-03
7 02 FCC Special Power of AttorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01
2019-03-03
7 02 FCC Request for Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01
2019-03-03
7 02 FCC Class II Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01
2019-03-03
7 02 FCC Authorization LetterCover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01
2019-03-03
8 04 External PhotoExternal Photos
Adobe Acrobat PDF (278 kB)
2019-03-01
2019-03-03
8 03 FCC Test Setup Photo_DSSTest Setup Photos
Adobe Acrobat PDF (2168 kB)
2019-03-01
2019-03-03
8 03 FCC Test Report_DSSTest Report
Adobe Acrobat PDF (2847 kB)
2019-03-01
2019-03-03
8 03 FCC RF Exposure_DSSRF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01
2019-03-03
8 02 FCC Special Power of AttorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01
2019-03-03
8 02 FCC Request for Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01
2019-03-03
8 02 FCC Class II Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01
2019-03-03
8 02 FCC Authorization LetterCover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01
2019-03-03
4 External photosExternal Photos
Adobe Acrobat PDF (102 kB)
2016-04-27
2016-04-27
4 Test setup photosTest Setup Photos
Adobe Acrobat PDF (879 kB)
2016-04-27
2016-04-27
4 Test reportTest Report
Adobe Acrobat PDF (644 kB)
2016-04-27
2016-04-27
4 RF EX(Co-location)RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27
2016-04-27
4 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27
2016-04-27
4 Test report(reference Co-location module)Test Report
Adobe Acrobat PDF (1815 kB)
2016-04-27
2016-04-27
4 Power of attorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27
2016-04-27
4 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27
2016-04-27
4 C2PC letterCover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27
2016-04-27
4 Authorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27
2016-04-27
5 External photosExternal Photos
Adobe Acrobat PDF (102 kB)
2016-04-27
2016-04-27
5 Test setup photosTest Setup Photos
Adobe Acrobat PDF (896 kB)
2016-04-27
2016-04-27
5 Test reportTest Report
Adobe Acrobat PDF (474 kB)
2016-04-27
2016-04-27
5 RF EX(Co-location)RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27
2016-04-27
5 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27
2016-04-27
5 Test report(Reference Co-location module)Test Report
Adobe Acrobat PDF (1206 kB)
2016-04-27
2016-04-27
5 Power of attorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27
2016-04-27
5 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27
2016-04-27
5 C2PC letterCover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27
2016-04-27
5 Authorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27
2016-04-27
6 External photosExternal Photos
Adobe Acrobat PDF (102 kB)
2016-04-27
2016-04-27
6 Test setup photosTest Setup Photos
Adobe Acrobat PDF (848 kB)
2016-04-27
2016-04-27
6 Test reportTest Report
Adobe Acrobat PDF (357 kB)
2016-04-27
2016-04-27
6 RF EX(Co-located)RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27
2016-04-27
6 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27
2016-04-27
6 Test report(reference Co-located module)Test Report
Adobe Acrobat PDF (2569 kB)
2016-04-27
2016-04-27
6 Power of attorneyCover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27
2016-04-27
6 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27
2016-04-27
6 C2PC letterCover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27
2016-04-27
6 Authorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27
2016-04-27
2 LMA Letter_RevCover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11
2016-02-12
3 LMA Letter_RevCover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11
2016-02-12
1 LMA Letter_RevCover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11
2016-02-12
2 Users manualUsers Manual
Adobe Acrobat PDF (172 kB)
2016-01-29
2016-04-13
2 Internal photosInternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-29
2016-04-13
2 External photosExternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-29
2016-04-13
2 Test setup photos(NII)Test Setup Photos
Adobe Acrobat PDF (1025 kB)
2016-01-29
2016-04-13
2 Test setup photos(DFS)Test Setup Photos
Adobe Acrobat PDF (425 kB)
2016-01-29
2016-04-13
2 Label&locationID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28
2016-02-12
2 Test report(NII)Test Report
Adobe Acrobat PDF (1889 kB)
2016-01-28
2016-02-12
2 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28
2016-02-12
2 Test report(DFS)Test Report
Adobe Acrobat PDF (503 kB)
2016-01-28
2016-02-12
2 Power of attorneyCover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28
2016-02-12
2 Confidentiality letter(Short)Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
2 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
2 Old or New rule letterCover Letter(s)
Adobe Acrobat PDF (19 kB)
2016-01-28
2016-02-12
2 Autorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28
2016-02-12
3 Users manualUsers Manual
Adobe Acrobat PDF (172 kB)
2016-01-28
2016-04-13
3 Internal photosInternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28
2016-04-13
3 External photosExternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28
2016-04-13
3 Test setup photosTest Setup Photos
Adobe Acrobat PDF (762 kB)
2016-01-28
2016-04-13
3 Label&locationID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28
2016-02-12
3 Test report(DTS)Test Report
Adobe Acrobat PDF (1005 kB)
2016-01-28
2016-02-12
3 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28
2016-02-12
3 Power of attorneyCover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28
2016-02-12
3 Confidentiality letter(Short)Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
3 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
3 Authorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28
2016-02-12
1 Test report(DSS)Test Report
Adobe Acrobat PDF (1086 kB)
2016-01-28
2016-02-12
1 Users manualUsers Manual
Adobe Acrobat PDF (172 kB)
2016-01-28
2016-04-13
1 Internal photosInternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28
2016-04-13
1 External photosExternal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28
2016-04-13
1 Test setup photosTest Setup Photos
Adobe Acrobat PDF (762 kB)
2016-01-28
2016-04-13
1 Label&locationID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28
2016-02-12
1 RF EXRF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28
2016-02-12
1 Power of attoneyCover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28
2016-02-12
1 Confidentiality letter(Short)Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
1 Confidentiality letterCover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28
2016-02-12
1 Authorization letterCover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28
2016-02-12

APP # 9 (2019-03-03)

App # Document Type Submitted
Available
9 03 FCC Test Report_NII-3 Test Report
Adobe Acrobat PDF (1994 kB)
2019-03-03 00:00:00
2019-03-03 00:00:00
9 03 FCC Test Report_NII-2 Test Report
Adobe Acrobat PDF (3978 kB)
2019-03-03 00:00:00
2019-03-03 00:00:00
9 03 FCC Test Report_NII-1 Test Report
Adobe Acrobat PDF (3882 kB)
2019-03-03 00:00:00
2019-03-03 00:00:00
9 04 External Photo External Photos
Adobe Acrobat PDF (278 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 03 FCC Test Setup Photo_NII Test Setup Photos
Adobe Acrobat PDF (720 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 03 FCC RF Exposure_NII RF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 02 FCC Special Power of Attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 02 FCC Request for Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 02 FCC Class II Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
9 02 FCC Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00

APP # 7 (2019-03-03)

App # Document Type Submitted
Available
7 04 External Photo External Photos
Adobe Acrobat PDF (278 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 03 FCC Test Setup Photo_DTS_WLAN Test Setup Photos
Adobe Acrobat PDF (770 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 03 FCC Test Setup Photo_DTS_BLE Test Setup Photos
Adobe Acrobat PDF (713 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 03 FCC Test Report_DTS_WLAN Test Report
Adobe Acrobat PDF (4054 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 03 FCC Test Report_DTS_BLE Test Report
Adobe Acrobat PDF (1737 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 03 FCC RF Exposure_DTS RF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 02 FCC Special Power of Attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 02 FCC Request for Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 02 FCC Class II Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
7 02 FCC Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00

APP # 8 (2019-03-03)

App # Document Type Submitted
Available
8 04 External Photo External Photos
Adobe Acrobat PDF (278 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 03 FCC Test Setup Photo_DSS Test Setup Photos
Adobe Acrobat PDF (2168 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 03 FCC Test Report_DSS Test Report
Adobe Acrobat PDF (2847 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 03 FCC RF Exposure_DSS RF Exposure Info
Adobe Acrobat PDF (86 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 02 FCC Special Power of Attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 02 FCC Request for Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (26 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 02 FCC Class II Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (53 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00
8 02 FCC Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (31 kB)
2019-03-01 00:00:00
2019-03-03 00:00:00

APP # 4 (2016-04-27)

App # Document Type Submitted
Available
4 External photos External Photos
Adobe Acrobat PDF (102 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Test setup photos Test Setup Photos
Adobe Acrobat PDF (879 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Test report Test Report
Adobe Acrobat PDF (644 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 RF EX(Co-location) RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Test report(reference Co-location module) Test Report
Adobe Acrobat PDF (1815 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Power of attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 C2PC letter Cover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
4 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00

APP # 5 (2016-04-27)

App # Document Type Submitted
Available
5 External photos External Photos
Adobe Acrobat PDF (102 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Test setup photos Test Setup Photos
Adobe Acrobat PDF (896 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Test report Test Report
Adobe Acrobat PDF (474 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 RF EX(Co-location) RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Test report(Reference Co-location module) Test Report
Adobe Acrobat PDF (1206 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Power of attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 C2PC letter Cover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
5 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00

APP # 6 (2016-04-27)

App # Document Type Submitted
Available
6 External photos External Photos
Adobe Acrobat PDF (102 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Test setup photos Test Setup Photos
Adobe Acrobat PDF (848 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Test report Test Report
Adobe Acrobat PDF (357 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 RF EX(Co-located) RF Exposure Info
Adobe Acrobat PDF (81 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Test report(reference Co-located module) Test Report
Adobe Acrobat PDF (2569 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Power of attorney Cover Letter(s)
Adobe Acrobat PDF (313 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 C2PC letter Cover Letter(s)
Adobe Acrobat PDF (42 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00
6 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-04-27 00:00:00
2016-04-27 00:00:00

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 LMA Letter_Rev Cover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11 00:00:00
2016-02-12 00:00:00

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 LMA Letter_Rev Cover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11 00:00:00
2016-02-12 00:00:00

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 LMA Letter_Rev Cover Letter(s)
Adobe Acrobat PDF (24 kB)
2016-02-11 00:00:00
2016-02-12 00:00:00

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Users manual Users Manual
Adobe Acrobat PDF (172 kB)
2016-01-29 00:00:00
2016-04-13 00:00:00
2 Internal photos Internal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-29 00:00:00
2016-04-13 00:00:00
2 External photos External Photos
Adobe Acrobat PDF (1039 kB)
2016-01-29 00:00:00
2016-04-13 00:00:00
2 Test setup photos(NII) Test Setup Photos
Adobe Acrobat PDF (1025 kB)
2016-01-29 00:00:00
2016-04-13 00:00:00
2 Test setup photos(DFS) Test Setup Photos
Adobe Acrobat PDF (425 kB)
2016-01-29 00:00:00
2016-04-13 00:00:00
2 Label&location ID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Test report(NII) Test Report
Adobe Acrobat PDF (1889 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Test report(DFS) Test Report
Adobe Acrobat PDF (503 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Power of attorney Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Confidentiality letter(Short) Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Old or New rule letter Cover Letter(s)
Adobe Acrobat PDF (19 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
2 Autorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Users manual Users Manual
Adobe Acrobat PDF (172 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
3 Internal photos Internal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
3 External photos External Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
3 Test setup photos Test Setup Photos
Adobe Acrobat PDF (762 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
3 Label&location ID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Test report(DTS) Test Report
Adobe Acrobat PDF (1005 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Power of attorney Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Confidentiality letter(Short) Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Test report(DSS) Test Report
Adobe Acrobat PDF (1086 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 Users manual Users Manual
Adobe Acrobat PDF (172 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
1 Internal photos Internal Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
1 External photos External Photos
Adobe Acrobat PDF (1039 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
1 Test setup photos Test Setup Photos
Adobe Acrobat PDF (762 kB)
2016-01-28 00:00:00
2016-04-13 00:00:00
1 Label&location ID Label/Location Info
Adobe Acrobat PDF (169 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 RF EX RF Exposure Info
Adobe Acrobat PDF (51 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 Power of attoney Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 Confidentiality letter(Short) Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 Confidentiality letter Cover Letter(s)
Adobe Acrobat PDF (20 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
1 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (25 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 8 (2019-03-03)

App # Document Type Submitted
Available
8 05 Confidential_Theory of Operation-Antenna Specification Operational Description
Adobe Acrobat PDF (786 kB)
2019-03-01 00:00:00
N/A

APP # 4 (2016-04-27)

App # Document Type Submitted
Available
4 Antenna spec2 Operational Description
Adobe Acrobat PDF (622 kB)
2016-04-27 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Schematics Schematics
Adobe Acrobat PDF (443 kB)
2016-01-28 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Block diagram Block Diagram
Adobe Acrobat PDF (178 kB)
2016-01-28 00:00:00
N/A

APP # 5 (2016-04-27)

App # Document Type Submitted
Available
5 Antenna spec1 Operational Description
Adobe Acrobat PDF (56 kB)
2016-04-27 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Antenna) Operational Description
Adobe Acrobat PDF (585 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Split module) Operational Description
Adobe Acrobat PDF (518 kB)
2016-01-29 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Operation description-KDB confirmation for split module Operational Description
Adobe Acrobat PDF (518 kB)
2016-02-11 00:00:00
N/A

APP # 6 (2016-04-27)

App # Document Type Submitted
Available
6 Co-location diagram Operational Description
Adobe Acrobat PDF (201 kB)
2016-04-27 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Operational description(Spec) Operational Description
Adobe Acrobat PDF (370 kB)
2016-01-28 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 LMA letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Interface) Operational Description
Adobe Acrobat PDF (2482 kB)
2016-01-29 00:00:00
N/A

APP # 9 (2019-03-03)

App # Document Type Submitted
Available
9 05 Confidential_Theory of Operation-Antenna Specification Operational Description
Adobe Acrobat PDF (786 kB)
2019-03-01 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Split module) Operational Description
Adobe Acrobat PDF (518 kB)
2016-01-28 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Operational description(Channel) Operational Description
Adobe Acrobat PDF (58 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operation description-KDB confirmation for split module Operational Description
Adobe Acrobat PDF (518 kB)
2016-02-11 00:00:00
N/A

APP # 7 (2019-03-03)

App # Document Type Submitted
Available
7 05 Confidential_Theory of Operation-Antenna List Operational Description
Adobe Acrobat PDF (46 kB)
2019-03-01 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Hopping) Operational Description
Adobe Acrobat PDF (137 kB)
2016-01-28 00:00:00
N/A

APP # 6 (2016-04-27)

App # Document Type Submitted
Available
6 Antenna spec2 Operational Description
Adobe Acrobat PDF (622 kB)
2016-04-27 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operation description-KDB confirmation for split module Operational Description
Adobe Acrobat PDF (518 kB)
2016-02-11 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Spec) Operational Description
Adobe Acrobat PDF (370 kB)
2016-01-29 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Block diagram Block Diagram
Adobe Acrobat PDF (178 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 LMA letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 8 (2019-03-03)

App # Document Type Submitted
Available
8 05 Confidential_Theory of Operation-Antenna List Operational Description
Adobe Acrobat PDF (46 kB)
2019-03-01 00:00:00
N/A

APP # 4 (2016-04-27)

App # Document Type Submitted
Available
4 Antenna spec1 Operational Description
Adobe Acrobat PDF (56 kB)
2016-04-27 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Operational description(Security) Operational Description
Adobe Acrobat PDF (85 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Channel) Operational Description
Adobe Acrobat PDF (58 kB)
2016-01-29 00:00:00
N/A

APP # 7 (2019-03-03)

App # Document Type Submitted
Available
7 06 Confidential_Theory of Operation-Interface Specification Operational Description
Adobe Acrobat PDF (481 kB)
2019-03-01 00:00:00
N/A

APP # 9 (2019-03-03)

App # Document Type Submitted
Available
9 05 Confidential_Theory of Operation-Antenna List Operational Description
Adobe Acrobat PDF (46 kB)
2019-03-01 00:00:00
N/A

APP # 5 (2016-04-27)

App # Document Type Submitted
Available
5 Co-location diagram Operational Description
Adobe Acrobat PDF (201 kB)
2016-04-27 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Spec) Operational Description
Adobe Acrobat PDF (370 kB)
2016-01-28 00:00:00
N/A

APP # 8 (2019-03-03)

App # Document Type Submitted
Available
8 06 Confidential_Theory of Operation-Interface Specification Operational Description
Adobe Acrobat PDF (481 kB)
2019-03-01 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Test report(DSS) Test Setup Photos
Adobe Acrobat PDF (1086 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Block diagram Block Diagram
Adobe Acrobat PDF (178 kB)
2016-01-29 00:00:00
N/A

APP # 5 (2016-04-27)

App # Document Type Submitted
Available
5 Antenna spec2 Operational Description
Adobe Acrobat PDF (622 kB)
2016-04-27 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Schematics Schematics
Adobe Acrobat PDF (443 kB)
2016-01-28 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Channel) Operational Description
Adobe Acrobat PDF (58 kB)
2016-01-28 00:00:00
N/A

APP # 6 (2016-04-27)

App # Document Type Submitted
Available
6 Antenna spec1 Operational Description
Adobe Acrobat PDF (56 kB)
2016-04-27 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 Operational description(Antenna) Operational Description
Adobe Acrobat PDF (585 kB)
2016-01-28 00:00:00
N/A
3 Operational description(Split module) Operational Description
Adobe Acrobat PDF (518 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Security) Operational Description
Adobe Acrobat PDF (85 kB)
2016-01-29 00:00:00
N/A

APP # 9 (2019-03-03)

App # Document Type Submitted
Available
9 06 Confidential_Theory of Operation-Interface Specification Operational Description
Adobe Acrobat PDF (481 kB)
2019-03-01 00:00:00
N/A

APP # 3 (2016-02-12)

App # Document Type Submitted
Available
3 LMA letter Cover Letter(s)
Adobe Acrobat PDF (27 kB)
2016-01-28 00:00:00
2016-02-12 00:00:00
3 Operational description(Interface) Operational Description
Adobe Acrobat PDF (2482 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Operational description(Anttena) Operational Description
Adobe Acrobat PDF (585 kB)
2016-01-29 00:00:00
N/A

APP # 4 (2016-04-27)

App # Document Type Submitted
Available
4 Co-location diagram Operational Description
Adobe Acrobat PDF (201 kB)
2016-04-27 00:00:00
N/A

APP # 7 (2019-03-03)

App # Document Type Submitted
Available
7 05 Confidential_Theory of Operation-Antenna Specification Operational Description
Adobe Acrobat PDF (786 kB)
2019-03-01 00:00:00
N/A

APP # 1 (2016-02-12)

App # Document Type Submitted
Available
1 Operational description(Interface) Operational Description
Adobe Acrobat PDF (2482 kB)
2016-01-28 00:00:00
N/A

APP # 2 (2016-02-12)

App # Document Type Submitted
Available
2 Schematics Schematics
Adobe Acrobat PDF (443 kB)
2016-01-29 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: nLzMEjuhQfqVs0Lbd4x14w==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   04/13/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: 0tVMpfOSUIrq/44GROP19w==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   04/13/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: hmZcNC4gMYeoG5fsEeH7UA==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   04/13/2016
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: 81-596-24-8116 Extension:
Fax Number:  81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: Nk84sMpFy38ff81EU03PUA==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: R415i51Le3JkvUEMi1CFVg==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: hssJvFKENgttbuBkBXcpQQ==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   UL Japan, Inc. Shonan EMC EMC Lab.
First Name:   Tetsuya
Last Name:   Hashimoto
Telephone Number: +81-596-24-8116 Extension:
Fax Number:  +81 596 24 8095
E-mail:  Tetsuya.Hashimoto@jp.ul.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: xRAg0D3eCbDRNWg0V4ckRA==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sony GMOC EMC/RF Test Laboratory, Main Lab
First Name:   Koichi
Last Name:   Hiyaoka
Telephone Number: 81-438-37-2750 Extension:
Fax Number:  81-438-37-1021
E-mail:  Koichi.Hiyaoka@jp.sony.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: HEIWFWOnNC9JbTnmdGIvXw==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sony GMOC EMC/RF Test Laboratory, Main Lab
First Name:   Koichi
Last Name:   Hiyaoka
Telephone Number: 81-438-37-2750 Extension:
Fax Number:  81-438-37-1021
E-mail:  Koichi.Hiyaoka@jp.sony.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Sony Corporation
FCC Registration Number (FRN): 0003739166
Alphanumeric FCC ID: AK8BNSY25
Unique Application Identifier: 0oxUV0ST5i7YpPU73EGddw==
Line one: 1-7-1 Konan
Line two: Minato-ku
City: Tokyo
State: N/A
Country: Japan
Zip Code: 108-0075

TCB Information
TCB Application Email Address: emc.jp@ul.com
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: AK8
Product Code: BNSY25

Person at the applicant's address to receive grant or for contact
Name: Ryo Takata
Title: Senior Manager
Telephone Number: 81-50-3750-1419 Extension:
Fax Number: 81-50-3750-6540
Email: cs-comp@jp.sony.com

Technical Contact
Firm Name:
UL Japan, Inc.
First Name: Toyokazu
Last Name: Imamura
Line 1:
1-22-3 Megumigaoka, Hiratsuka-shi
City: Kanagawa-ken
Country:
Japan
Zip Code: 259-1220
Telephone Number:
81-463-50-6400

Extension:
Fax Number: 81-463-50-6401
E-Mail:

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Wireless Transceiver Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Limited Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Sony GMOC EMC/RF Test Laboratory, Main Lab
First Name:   Koichi
Last Name:   Hiyaoka
Telephone Number: 81-438-37-2750 Extension:
Fax Number:  81-438-37-1021
E-mail:  Koichi.Hiyaoka@jp.sony.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Yoshihisa Maeda
Title of authorized signature:  Project Engineer

Complete items below if agent signs the application:

Firm Name:  UL Japan, Inc.
Name:  Yoshihisa Yoshihisa Yoshihisa
Line 1:  Yoshihisa
Line 2:  Yoshihisa
P.O. Box:  Yoshihisa
City:  Yoshihisa
State:  Yoshihisa
Country:  Yoshihisa
Zip Code:  Yoshihisa
Telephone Number:  81-596-24-8999
Fax Number:  81-596-24-8124
E-mail:  Yoshihisa.Maeda@ul.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 03/03/2019

Application Dated: 03/01/2019
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5745.0  -  5825.0 0.0204  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC ND 15E 5180.0  -  5320.0 0.0219  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 03/03/2019

Application Dated: 03/01/2019
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5745.0  -  5825.0 0.0204  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC ND 15E 5180.0  -  5320.0 0.0219  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA635301
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 02/12/2016

Application Dated: 01/28/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5320.0 0.0219  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC 15E 5745.0  -  5825.0 0.0204  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 02/12/2016

Application Dated: 01/28/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5320.0 0.0219  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC 15E 5745.0  -  5825.0 0.0204  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA506460
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 03/03/2019

Application Dated: 03/01/2019
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 03/03/2019

Application Dated: 03/01/2019
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA777430
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 02/12/2016

Application Dated: 01/28/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 02/12/2016

Application Dated: 01/28/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA959256
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 04/27/2016

Application Dated: 04/27/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/27/2016

Application Dated: 04/27/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA946992
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 04/27/2016

Application Dated: 04/27/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5320.0 0.0219  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC 15E 5745.0  -  5825.0 0.0204  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/27/2016

Application Dated: 04/27/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC ND 15E 5180.0  -  5320.0 0.0219  
38 CC ND 15E 5500.0  -  5700.0 0.0207  
38 CC 15E 5745.0  -  5825.0 0.0204  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. This device has a 20 MHz and 40 MHz bandwidth mode. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA767520
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 02/12/2016

Application Dated: 01/28/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 02/12/2016

Application Dated: 01/28/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0058  

Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA814520
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 04/27/2016

Application Dated: 04/27/2016
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 04/27/2016

Application Dated: 04/27/2016
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device and to be ensured no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA427778
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 03/03/2019

Application Dated: 03/01/2019
Sony Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

CC: This device is certified pursuant to two different Part 15 rules sections.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 03/03/2019

Application Dated: 03/01/2019
 
Attention: Ryo Takata , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BNSY25
Name of Grantee:  Sony Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Transceiver Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3864  
CC 15C 2402.0  -  2480.0 0.0059  

Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). Installation is limited to the host system evaluated in this filing. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding on the module. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. This radio front end module is exclusively for Grantee and not sold to general public. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA126377

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details