FCC ID AK8BTLS1

Bluetooth Module

by Sony Group Corporation

Grantee Code: AK8   Product Code: BTLS1
Latest application date: 2015-11-04

FCC ID Device Details

FCC IDAK8BTLS1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAK8
Product CodeBTLS1
Applicant BusinessSony Group Corporation 🇯🇵
Related Domains jp.sony.com
Equipment ClassBluetooth Module
Test FirmSony GMOC EMC/RF Test Laboratory, Main Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2015-11-04

Exhibits

DocumentTypeAvailableFile
(Short-Term Confidential) User ManualUsers Manual2016-05-03PDF 74.8 KB
(Short-Term Confidential) Internal PhotoInternal Photos2016-05-03PDF 89.2 KB
(Short-Term Confidential) External PhotoExternal Photos2016-05-03PDF 89.2 KB
Label and LocationID Label/Location Info2015-11-04PDF 25.7 KB
(Short-Term Confidential) FCC Test Setup Photo_DSSTest Setup Photos2016-05-03PDF 485 KB
FCC Test Report_DSSTest Report2015-11-04PDF 1.5 MB
FCC Authorization LetterCover Letter(s)2015-11-04PDF 37.2 KB
FCC LMA LetterCover Letter(s)2015-11-04PDF 38.3 KB
FCC Request for Confidentiality LetterCover Letter(s)2015-11-04PDF 32.7 KB
FCC Request for Short-term Confidentiality LetterCover Letter(s)2015-11-04PDF 32.6 KB
FCC Special Power of AttorneyCover Letter(s)2015-11-04PDF 28 KB
FCC RF Exposure_DSSRF Exposure Info2015-11-04PDF 134.9 KB
(Confidential) Block Diagram Metadata onlyBlock DiagramPDF 100.8 KB
(Confidential) Schematics Metadata onlySchematicsPDF 341.1 KB
(Confidential) Theory of Operation-Antenna Specification Metadata onlyOperational DescriptionPDF 216.6 KB
(Confidential) Theory of Operation-Hopping Metadata onlyOperational DescriptionPDF 119.3 KB
(Confidential) Theory of Operation-Interference Specification Metadata onlyOperational DescriptionPDF 34.8 KB
(Confidential) Theory of Operation-Specification Metadata onlyOperational DescriptionPDF 34 KB

Application Information

Application IDkuAlFFxxxTBhh/woozT0vQ==
Final Action Date2015-11-04
Application PurposeOriginal Equipment
Applicant FRN0003739166
ModelBTLS1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBluetooth Module
Responsible PartyKazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220
AgentYoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com , 81-596-24-8999
Technical ContactTeruki Kurihara, Sony EMCS EMC/RF Test Laboratory Main Lab., Teruki.Kurihara@jp.sony.com , 81-438-37-2750
Test FirmKoichi Hiyaoka, Sony GMOC EMC/RF Test Laboratory, Main Lab, Koichi.Hiyaoka@sony.com , 81-438-37-2750
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/03/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Host systems must provide regulated supply voltages to the module.

Applications

Application IDDatePurpose
kuAlFFxxxTBhh/woozT0vQ==2015-11-04Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002200015C

Grants

TCB Grant - Application kuAlFFxxxTBhh/woozT0vQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 11/04/2015

Application Dated: 11/04/2015
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BTLS1
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0022  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Host systems must provide regulated supply voltages to the module.

EAS Grant - Application kuAlFFxxxTBhh/woozT0vQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 11/04/2015

Application Dated: 11/04/2015
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8BTLS1
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0022  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Host systems must provide regulated supply voltages to the module.



Mail To: