FCC ID AK8FLN01WBM

Wi-Fi/Bluetooth Module

by Sony Group Corporation

Grantee Code: AK8   Product Code: FLN01WBM
Latest application date: 2016-06-29

FCC ID Device Details

FCC IDAK8FLN01WBM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAK8
Product CodeFLN01WBM
Applicant BusinessSony Group Corporation 🇯🇵
Related Domains jp.sony.com
Equipment ClassWi-Fi/Bluetooth Module
Test FirmSony GMOC EMC/RF Test Laboratory, Main Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2016-06-29
2402-2480 MHzOriginal Equipment2016-06-29

Exhibits

DocumentTypeAvailableFile
(Short-Term Confidential) User ManualUsers Manual2016-09-02PDF 65.5 KB
(Short-Term Confidential) Internal PhotoInternal Photos2016-09-02PDF 359 KB
(Short-Term Confidential) External PhotoExternal Photos2016-09-02PDF 447.2 KB
Label and LocationID Label/Location Info2016-06-29PDF 167.1 KB
(Short-Term Confidential) FCC Test Setup Photo_DSSTest Setup Photos2016-09-02PDF 593.3 KB
(Short-Term Confidential) FCC Test Setup Photo_DTS (BLE)Test Setup Photos2016-09-02PDF 957.8 KB
(Short-Term Confidential) FCC Test Setup Photo_DTS (WLAN)Test Setup Photos2016-09-02PDF 597.1 KB
FCC Test Report_DSSTest Report2016-06-29PDF 2.8 MB
FCC Test Report_DTS (BLE)Test Report2016-06-29PDF 1.3 MB
FCC Test Report_DTS (WLAN)Test Report2016-06-29PDF 3.7 MB
FCC Authorization LetterCover Letter(s)2016-06-29PDF 37.2 KB
FCC LMA LetterCover Letter(s)2016-06-29PDF 97.5 KB
FCC Request for Confidentiality LetterCover Letter(s)2016-06-29PDF 32.8 KB
FCC Request for Short-term Confidentiality LetterCover Letter(s)2016-06-29PDF 32.8 KB
FCC Special Power of AttorneyCover Letter(s)2016-06-29PDF 314 KB
FCC RF Exposure_DSSRF Exposure Info2016-06-29PDF 164.8 KB
FCC RF Exposure_DTSRF Exposure Info2016-06-29PDF 125.8 KB
(Confidential) Block Diagram Metadata onlyBlock DiagramPDF 319.3 KB
(Confidential) Schematics Metadata onlySchematicsPDF 336.7 KB
(Confidential) Theory of Operation-Antenna Specification Metadata onlyOperational DescriptionPDF 167.1 KB
(Confidential) Theory of Operation-Hopping Metadata onlyOperational DescriptionPDF 120.6 KB
(Confidential) Theory of Operation-Interface Specification Metadata onlyOperational DescriptionPDF 177.2 KB
(Confidential) Theory of Operation-Specification Metadata onlyOperational DescriptionPDF 567.2 KB

Application Information

Application IDSUMRjar5KdNk0Lvc1Jg54g==
Final Action Date2016-06-29
Application PurposeOriginal Equipment
Applicant FRN0003739166
ModelFLN01WBM
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWi-Fi/Bluetooth Module
Responsible PartyKazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220
AgentYoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com , 81-596-24-8999
Technical ContactTeruki Kurihara, SONY Global Manufacturing & Operations Corporation, Teruki.Kurihara@jp.sony.com , 81-438-37-2750
Test FirmKoichi Hiyaoka, Sony GMOC EMC/RF Test Laboratory, Main Lab, Koichi.Hiyaoka@sony.com , 81-438-37-2750
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/02/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Installation is limited to the host system evaluated in this filing. Host systems must provide regulated supply voltages to the module. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding and voltage regulation on the module.

Applications

Application IDDatePurpose
SUMRjar5KdNk0Lvc1Jg54g==2016-06-29Original Equipment
AEbrztSalQgU/jgxtTSGAA==2016-06-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005900015CCC
2402-2480 MHz0.00115CCC
2412-2462 MHz0.062715CCC

Grants

TCB Grant - Application SUMRjar5KdNk0Lvc1Jg54g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/29/2016

Application Dated: 06/29/2016
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8FLN01WBM
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Installation is limited to the host system evaluated in this filing. Host systems must provide regulated supply voltages to the module. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding and voltage regulation on the module.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application SUMRjar5KdNk0Lvc1Jg54g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/29/2016

Application Dated: 06/29/2016
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8FLN01WBM
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0059  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Installation is limited to the host system evaluated in this filing. Host systems must provide regulated supply voltages to the module. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding and voltage regulation on the module.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application AEbrztSalQgU/jgxtTSGAA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/29/2016

Application Dated: 06/29/2016
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8FLN01WBM
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: Wi-Fi/Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0627  
CC 15C 2402.0  -  2480.0 0.001  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Installation is limited to the host system evaluated in this filing. Host systems must provide regulated supply voltages to the module. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding and voltage regulation on the module.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application AEbrztSalQgU/jgxtTSGAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/29/2016

Application Dated: 06/29/2016
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8FLN01WBM
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: Wi-Fi/Bluetooth Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0627  
CC 15C 2402.0  -  2480.0 0.001  

Limited Modular Approval. Output power listed is Conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Installation is limited to the host system evaluated in this filing. Host systems must provide regulated supply voltages to the module. Additional host systems will require reassessment of radiated field strength for fundamental and spurious emissions due to the lack of shielding and voltage regulation on the module.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: