FCC ID AK8IRF302U

2.4GHz/5GHz Band Wireless LAN Transceiver

by Sony Group Corporation

Grantee Code: AK8   Product Code: IRF302U
Latest application date: 2004-08-27

FCC ID Device Details

FCC IDAK8IRF302U
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAK8
Product CodeIRF302U
Applicant BusinessSony Group Corporation 🇯🇵
Related Domains jp.sony.com jp.ul.com
Equipment Class2.4GHz/5GHz Band Wireless LAN Transceiver
Test FirmUL Apex Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-08-27
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2004-08-27
5180-5320 MHzOriginal Equipment2004-07-02
2412-2462 MHzOriginal Equipment2004-07-02

Exhibits

DocumentTypeAvailableFile
Manual for IRF302UUsers Manual2004-08-27PDF 231.1 KB
Manual for LFX1Users Manual2004-08-27PDF 1.3 MB
Manual for Module IRF302UUsers Manual2004-08-27PDF 231.1 KB
Users Manual for IR302UUsers Manual2004-08-27PDF 232.5 KB
Users manual for IRF302U Rev08202004Users Manual2004-08-27PDF 234.2 KB
Installation guide revisedUsers Manual2004-07-02PDF 181.3 KB
Manual revisedUsers Manual2004-07-02PDF 221 KB
Internal photosInternal Photos2004-07-02PDF 194.4 KB
External photosExternal Photos2004-07-02PDF 194.4 KB
FCC ID Label Base StationID Label/Location Info2004-08-27PDF 128.7 KB
FCC ID Label MonitorID Label/Location Info2004-08-27PDF 136.8 KB
FCC ID Label for Base StationID Label/Location Info2004-08-27PDF 128.7 KB
FCC ID Label for MonitorID Label/Location Info2004-08-27PDF 136.8 KB
FCC Statement LabelID Label/Location Info2004-08-27PDF 109.9 KB
Label Location for Base StationID Label/Location Info2004-08-27PDF 126.4 KB
Label Location for MonitorID Label/Location Info2004-08-27PDF 115.6 KB
FCC ID label locationID Label/Location Info2004-07-02PDF 88.9 KB
FCC ID label sampleID Label/Location Info2004-07-02PDF 129.8 KB
SAR Test SetupRF Exposure Info2004-08-27PDF 413.8 KB
Set up photos 1Test Setup Photos2004-07-02PDF 363.1 KB
Set up photos 2Test Setup Photos2004-07-02PDF 372.2 KB
Test setup 15407Test Setup Photos2004-07-02PDF 372.2 KB
SAR Test Report1RF Exposure Info2004-08-27PDF 917.2 KB
SAR Test Report2RF Exposure Info2004-08-27PDF 1.6 MB
SAR Test Report3RF Exposure Info2004-08-27PDF 1.5 MB
SAR Test Report4RF Exposure Info2004-08-27PDF 3.3 MB
Test report 15247 addendumTest Report2004-07-02PDF 1.4 MB
Test report 15247 originalTest Report2004-07-02PDF 1.2 MB
Test report 15407 originalTest Report2004-07-02PDF 1.5 MB
Test reprot 15407 addendumTest Report2004-07-02PDF 1.5 MB
Adding to the grantCover Letter(s)2004-08-27PDF 23.4 KB
Agent LetterCover Letter(s)2004-08-27PDF 68.1 KB
Reply to comment 08202004Cover Letter(s)2004-08-27PDF 23.5 KB
Reply to comment 08162004Cover Letter(s)2004-08-27PDF 22.3 KB
Reply to comment 08192004Cover Letter(s)2004-08-27PDF 22.2 KB
Reply to comment 27396Cover Letter(s)2004-08-27PDF 20.1 KB
Request for LMACover Letter(s)2004-08-27PDF 287.5 KB
Request for PCIICover Letter(s)2004-08-27PDF 61.3 KB
ATCB commentsCover Letter(s)2004-07-02PDF 30.8 KB
Modular request letterCover Letter(s)2004-07-02PDF 491.4 KB
POA and Request for confidentialityCover Letter(s)2004-07-02PDF 192.8 KB
POA and confidentiality requestCover Letter(s)2004-07-02PDF 192.8 KB
Request for modular approvalCover Letter(s)2004-07-02PDF 491.4 KB
email response to ATCBCover Letter(s)2004-07-02PDF 16 KB
MPERF Exposure Info2004-07-02PDF 10.2 KB
MPERF Exposure Info2004-07-02PDF 10.2 KB
Block diagram Metadata onlyBlock DiagramPDF 121.1 KB
Schematics Metadata onlySchematicsPDF 511.6 KB
Antenna operational description Metadata onlyOperational DescriptionPDF 140.8 KB
Operational description Metadata onlyOperational DescriptionPDF 79.2 KB
operational description of antenna Metadata onlyOperational DescriptionPDF 140.8 KB

Application Information

Application IDwElQvUNLZSM4wyFxMDTD2Q==
Final Action Date2004-08-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003739166
ModelIRF302U
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description2.4GHz/5GHz Band Wireless LAN Transceiver
Responsible PartyKazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220
AgentTetsuya Tetsuya Tetsuya, UL Apex Co., Ltd., Tetsuya.Hashimoto@jp.ul.com , +81-596-24-8116
Technical ContactMiyo Ikuta, UL Apex Co., Ltd., Miyo.Ikuta@jp.ul.com , +81-596-24-8116
Non-Technical ContactHisayuki Kioka, UL Apex Co., Ltd., Hisayuki.Kioka@jp.ul.com , +81-596-24-8116
Test FirmTetsuo Maeno, UL Apex Co., Ltd., tetsuo.maeno@jp.ul.com , 81-596-24-8116
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations and portable configurations as described below. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of the module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This filing adds a specific host under portable conditions as described in the filing. The device must not be co-located or operated in conjunction with any other antenna or transmitter. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Highest reported body SAR are Pt 15 2.4 GHz 0.44 W/kg.

Applications

Application IDDatePurpose
wElQvUNLZSM4wyFxMDTD2Q==2004-08-27Class II permissive change or modification of presently authorized equipment
Gab+xu2pBpM6LkeYhlU5ug==2004-08-27Class II permissive change or modification of presently authorized equipment
sydSuAj0xaKGHDo6R/DyzQ==2004-07-02Original Equipment
kW4fDX3Pb5ivCQHDfPgtPA==2004-07-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.129000015CCC, CE
2412-2462 MHz0.129000015CCC
5180-5320 MHz0.035615ECC
5180-5320 MHz0.035615ECC, CE
5745-5805 MHz0.045515ECC
5745-5805 MHz0.045515ECC, CE

Grants

TCB Grant - Application wElQvUNLZSM4wyFxMDTD2Q==

This application does not exist.

EAS Grant - Application wElQvUNLZSM4wyFxMDTD2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 08/27/2004

Application Dated: 07/15/2004
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: 2.4GHz/5GHz Band Wireless LAN Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.129  

This Permissive Change/Modification was originally issued on 08/25/2004.

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations and portable configurations as described below. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of the module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This filing adds a specific host under portable conditions as described in the filing. The device must not be co-located or operated in conjunction with any other antenna or transmitter. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Highest reported body SAR are Pt 15 2.4 GHz 0.44 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application sydSuAj0xaKGHDo6R/DyzQ==

Mail To:
Hisayuki Kioka, Team Leader
UL Apex Co., Ltd.
4383-326 Asama-cho
Ise-shi, Mie-ken, 516-0021
Japan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/02/2004

Application Dated: 07/02/2004
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4GHz/5GHz Band Wireless LANTransceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.0356  
CC CE 15E 5745.0  -  5805.0 0.0455  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of thie module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application sydSuAj0xaKGHDo6R/DyzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 07/02/2004

Application Dated: 07/02/2004
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4GHz/5GHz Band Wireless LANTransceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.0356  
CC CE 15E 5745.0  -  5805.0 0.0455  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of thie module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application kW4fDX3Pb5ivCQHDfPgtPA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/02/2004

Application Dated: 07/02/2004
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: 2.4GHz/5GHz Band Wireless LAN Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.129  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of thie module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application kW4fDX3Pb5ivCQHDfPgtPA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 07/02/2004

Application Dated: 07/02/2004
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: 2.4GHz/5GHz Band Wireless LAN Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.129  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of thie module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application Gab+xu2pBpM6LkeYhlU5ug==

This application does not exist.

EAS Grant - Application Gab+xu2pBpM6LkeYhlU5ug==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 08/27/2004

Application Dated: 07/15/2004
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8IRF302U
Name of Grantee:  Sony Group Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 2.4GHz/5GHz Band Wireless LAN Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0356  
CC 15E 5745.0  -  5805.0 0.0455  

This Permissive Change/Modification was originally issued on 08/25/2004.

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations and portable configurations as described below. This module must be installed by the OEM or OEM integrator. Installation of the antenna cable must include the type ferrite shown in the filing. Instructions on installation of the module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This filing adds a specific host under portable conditions as described in the filing. The device must not be co-located or operated in conjunction with any other antenna or transmitter. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Highest reported body SAR are Pt 15 5.1 GHz 0.87 and 5.7 GHz 0.27 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:
Hisayuki Kioka, Team Leader
UL Apex Co., Ltd.
4383-326 Asama-cho
Ise-shi, Mie-ken, 516-0021
Japan