FCC ID AK8M16DAM2
Wireless communication module
by Sony Group Corporation
Grantee Code: AK8 Product Code: M16DAM2
Latest application date: 2018-03-01
FCC ID Device Details
| FCC ID | AK8M16DAM2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AK8 |
| Product Code | M16DAM2 |
| Applicant Business | Sony Group Corporation 🇯🇵 |
| Related Domains |  jp.sony.com |
| Equipment Class | Wireless communication module |
| Test Firm | UL Japan, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-01 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-20 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2017-04-20 |
| 5180-5320 MHz | Original Equipment | 2016-06-22 |
| 2402-2480 MHz | Original Equipment | 2016-06-22 |
| 2402-2480 MHz | Original Equipment | 2016-06-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short-Term Confidential) User Manual | Users Manual | 2016-12-19 | PDF 82.8 KB |
| (Short-Term Confidential) Internal Photo | Internal Photos | 2016-12-19 | PDF 112.8 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2018-08-29 | PDF 1.3 MB |
| (Short-Term Confidential) External Photo | External Photos | 2017-10-18 | PDF 193 KB |
| (Short-Term Confidential) External Photo | External Photos | 2016-12-19 | PDF 167 KB |
| Label and Location | ID Label/Location Info | 2016-06-22 | PDF 63.8 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DSS | Test Setup Photos | 2018-08-29 | PDF 310.8 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2018-08-29 | PDF 311.8 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_NII | Test Setup Photos | 2018-08-29 | PDF 309.6 KB |
| (Short term confidential) FCC Test Setup Photo_DSS | Test Setup Photos | 2017-10-18 | PDF 626.7 KB |
| (Short term confidential) FCC Test Setup Photo_DTS | Test Setup Photos | 2017-10-18 | PDF 975.7 KB |
| (Short term confidential) FCC Test Setup Photo_NII | Test Setup Photos | 2017-10-18 | PDF 771.1 KB |
| (Short term confidential) FCC DFS Setup Photo | Test Setup Photos | 2016-12-19 | PDF 236.3 KB |
| (Short term confidential) FCC Test Setup Photo_DSS | Test Setup Photos | 2016-12-19 | PDF 810.9 KB |
| (Short term confidential) FCC Test Setup Photo_DTS | Test Setup Photos | 2016-12-19 | PDF 1.3 MB |
| (Short term confidential) FCC Test Setup Photo_NII | Test Setup Photos | 2016-12-19 | PDF 979.9 KB |
| 03 FCC Test Report_DSS | Test Report | 2018-03-01 | PDF 768.3 KB |
| 03 FCC Test Report_DTS | Test Report | 2018-03-01 | PDF 1.1 MB |
| 03 FCC Test Report_NII | Test Report | 2018-03-01 | PDF 2.5 MB |
| FCC Test Report_DSS | Test Report | 2017-04-20 | PDF 740.1 KB |
| FCC Test Report_DTS | Test Report | 2017-04-20 | PDF 558.4 KB |
| FCC Test Report_NII | Test Report | 2017-04-20 | PDF 946 KB |
| FCC DFS Report_R1 | Test Report | 2016-06-22 | PDF 229.3 KB |
| FCC Test Report_DSS_R1 | Test Report | 2016-06-22 | PDF 893.6 KB |
| FCC Test Report_DTS_R1 | Test Report | 2016-06-22 | PDF 937.4 KB |
| FCC Test Report_NII_R1 | Test Report | 2016-06-22 | PDF 2.6 MB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2018-03-01 | PDF 368.5 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2018-03-01 | PDF 393.3 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2018-03-01 | PDF 331.5 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2018-03-01 | PDF 334 KB |
| 02 FCC Special Power of Attorney | Cover Letter(s) | 2018-03-01 | PDF 314.2 KB |
| FCC Authorization Letter-simple format | Cover Letter(s) | 2017-04-20 | PDF 368.3 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2017-04-20 | PDF 395.7 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2017-04-20 | PDF 319.5 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2017-04-20 | PDF 329.3 KB |
| FCC Special Power of Attorney | Cover Letter(s) | 2017-04-20 | PDF 314.2 KB |
| FCC Authorization Letter-simple format | Cover Letter(s) | 2016-06-22 | PDF 361 KB |
| FCC LMA Letter | Cover Letter(s) | 2016-06-22 | PDF 538.1 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2016-06-22 | PDF 321.7 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2016-06-22 | PDF 332 KB |
| FCC RF Exposure_DSS | RF Exposure Info | 2016-06-22 | PDF 65.7 KB |
| FCC RF Exposure_DTS | RF Exposure Info | 2016-06-22 | PDF 66.9 KB |
| FCC RF Exposure_NII | RF Exposure Info | 2016-06-22 | PDF 20.9 KB |
| (Confidential) Block Diagram Metadata only | Block Diagram | PDF 26.4 KB | |
| (Confidential) Schematics Metadata only | Schematics | PDF 59.3 KB | |
| (Confidential) Theory of Operation Metadata only | Operational Description | PDF 147.9 KB | |
| (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 17.1 KB | |
| (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 62 KB | |
| (Confidential) Theory of Operation-Antenna Specification_ANT_A Metadata only | Operational Description | PDF 245.9 KB | |
| (Confidential) Theory of Operation-Antenna Specification_ANT_B Metadata only | Operational Description | PDF 108.3 KB | |
| (Confidential) Theory of Operation-Antenna Specification_ANT_B_IFA Metadata only | Operational Description | PDF 274.6 KB | |
| (Confidential) Theory of Operation-Antenna Specification_ANT_C Metadata only | Operational Description | PDF 226.1 KB | |
| (Confidential) Theory of Operation-Antenna Specification_ANT_C_2310935 Metadata only | Operational Description | PDF 530.3 KB | |
| (Confidential) Theory of Operation-Channel List Metadata only | Operational Description | PDF 177.6 KB | |
| (Confidential) Theory of Operation-Difference Metadata only | Operational Description | PDF 310.3 KB | |
| (Confidential) Theory of Operation-Hopping Sequence Metadata only | Operational Description | PDF 168.7 KB | |
| (Confidential) Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 84.8 KB | |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 41.3 KB | |
| (Confidential) Theory of Operation-Specification Metadata only | Operational Description | PDF 73.5 KB | |
| 05 Confidential_Theory of Operation-Antenna List Metadata only | Operational Description | PDF 19.5 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification_ANT_A Metadata only | Operational Description | PDF 227.4 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification_ANT_B Metadata only | Operational Description | PDF 204.5 KB | |
| 05 Confidential_Theory of Operation-Antenna Specification_ANT_C Metadata only | Operational Description | PDF 559.3 KB | |
| 05 Confidential_Theory of Operation-Difference Metadata only | Operational Description | PDF 365.6 KB |
Application Information
| Application ID | k0tv5DJd0gj5IDMwtqaQwg== |
|---|---|
| Final Action Date | 2018-03-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003739166 |
| Model | M16DAM2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless communication module |
| Responsible Party | Kazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8999 |
| Technical Contact | Takayuki Shimada, UL Japan, Inc., Takayuki.Shimada@ul.com , 81-596-24-8999 |
| Test Firm | Masamichi Ishii, UL Japan, Inc., masamichi.ishii@ul.com , 81-596-24-8999 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/29/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| k0tv5DJd0gj5IDMwtqaQwg== | 2018-03-01 | Class II permissive change or modification of presently authorized equipment |
| jza2w+lIBkoRiRHsG2IjNQ== | 2018-03-01 | Class II permissive change or modification of presently authorized equipment |
| if0nbMGed1k9mmL1M67VTQ== | 2018-03-01 | Class II permissive change or modification of presently authorized equipment |
| s0DB7rWYDSX0sG5vrTA3xQ== | 2017-04-20 | Class II permissive change or modification of presently authorized equipment |
| Pn1DxnFT48ZkArv80vKKCg== | 2017-04-20 | Class II permissive change or modification of presently authorized equipment |
| P7d3zmE/vpwbHawhgUDlQg== | 2017-04-20 | Class II permissive change or modification of presently authorized equipment |
| ZFyAZNkyOw+OzoWzlct/0A== | 2016-06-22 | Original Equipment |
| XaLi/HSjQ5BqYOOhdydj2A== | 2016-06-22 | Original Equipment |
| CSdolVQYKG16ZLz71+g0ug== | 2016-06-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZFyAZNkyOw+OzoWzlct/0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/22/2016 Application Dated: 06/21/2016 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ZFyAZNkyOw+OzoWzlct/0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/22/2016 Application Dated: 06/21/2016 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/22/2016 Application Dated: 06/20/2016 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XaLi/HSjQ5BqYOOhdydj2A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/22/2016 Application Dated: 06/20/2016 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application s0DB7rWYDSX0sG5vrTA3xQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Pn1DxnFT48ZkArv80vKKCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application P7d3zmE/vpwbHawhgUDlQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 04/20/2017 Application Dated: 04/19/2017 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application k0tv5DJd0gj5IDMwtqaQwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2564 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0016 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jza2w+lIBkoRiRHsG2IjNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5320.0 | 0.0166 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0132 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0138 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application if0nbMGed1k9mmL1M67VTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/01/2018 Application Dated: 03/01/2018 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/22/2016 Application Dated: 06/20/2016 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CSdolVQYKG16ZLz71+g0ug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/22/2016 Application Dated: 06/20/2016 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M16DAM2 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 |
| Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable rf exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |