FCC ID AK8M21DFD1
Wireless communication module
by Sony Group Corporation
Grantee Code: AK8 Product Code: M21DFD1
Latest application date: 2024-09-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-25 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-01 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-01 |
| 2412-2462 MHz | Original Equipment | 2022-03-29 |
| 5745-5825 MHz | Original Equipment | 2022-03-29 |
| 2402-2480 MHz | Original Equipment | 2022-03-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 05 Short-Term Confidential_User Manual | Users Manual | 2022-09-26 | PDF 117.5 KB |
| 04 Short-Term Confidential_Internal Photo | Internal Photos | 2022-09-26 | PDF 314 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2025-03-25 | PDF 1.2 MB |
| 04 Short-Term Confidential_External Photo | External Photos | 2023-11-29 | PDF 4.3 MB |
| 04 Short-Term Confidential_External Photo | External Photos | 2022-09-26 | PDF 569.8 KB |
| 06 Label and Location | ID Label/Location Info | 2022-03-29 | PDF 336.8 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DSS | Test Setup Photos | 2025-03-25 | PDF 350 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2025-03-25 | PDF 466.7 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_NII | Test Setup Photos | 2025-03-25 | PDF 342 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DSS | Test Setup Photos | 2023-11-29 | PDF 204.4 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2023-11-29 | PDF 204.4 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_NII | Test Setup Photos | 2023-11-29 | PDF 481.1 KB |
| 03 Short-Term Confidential_FCC DFS Setup Photo | Test Setup Photos | 2022-09-26 | PDF 248.8 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DSS | Test Setup Photos | 2022-09-26 | PDF 768.9 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2022-09-26 | PDF 979.4 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_NII | Test Setup Photos | 2022-09-26 | PDF 682.1 KB |
| 03 Antenna Specification_ANT1 | Test Report | 2024-09-25 | PDF 1 MB |
| 03 Antenna Specification_ANT2 | Test Report | 2024-09-25 | PDF 829.3 KB |
| 03 Antenna Specification_ANT3 | Test Report | 2024-09-25 | PDF 1.2 MB |
| 03 Antenna Specification_ANT4 | Test Report | 2024-09-25 | PDF 958.5 KB |
| 03 FCC Test Report_DSS | Test Report | 2024-09-25 | PDF 1.3 MB |
| 03 FCC Test Report_DTS | Test Report | 2024-09-25 | PDF 2.9 MB |
| 03 FCC Test Report_NII_Part1 | Test Report | 2024-09-25 | PDF 5.4 MB |
| 03 FCC Test Report_NII_Part2 | Test Report | 2024-09-25 | PDF 3.6 MB |
| 03 AUT Report_IFA(Type_51-301)_ANT3 | Test Report | 2023-06-01 | PDF 861.1 KB |
| 03 AUT Report_IFA(Type_51-401)_ANT4 | Test Report | 2023-06-01 | PDF 551.8 KB |
| 03 AUT Report_PIFA(ANTS2M2-CSG05)_ANT1-2.pdf | Test Report | 2023-06-01 | PDF 1.1 MB |
| 03 AUT Report_PIFA(L34RF078)_ANT1-2 | Test Report | 2023-06-01 | PDF 1.1 MB |
| 03 FCC Test Report_DSS | Test Report | 2023-06-01 | PDF 1.3 MB |
| 03 FCC Test Report_DTS | Test Report | 2023-06-01 | PDF 1.3 MB |
| 03 FCC Test Report_NII_Part1 | Test Report | 2023-06-01 | PDF 5.4 MB |
| 03 FCC Test Report_NII_Part2 | Test Report | 2023-06-01 | PDF 3.6 MB |
| 03 FCC DFS Report | Test Report | 2022-03-29 | PDF 826.4 KB |
| 03 FCC Test Report_DSS | Test Report | 2022-03-29 | PDF 3.9 MB |
| 03 FCC Test Report_DTS_Part1 | Test Report | 2022-03-29 | PDF 5.5 MB |
| 03 FCC Test Report_DTS_Part2 | Test Report | 2022-03-29 | PDF 4.9 MB |
| 03 FCC Test Report_NII_Part1 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part10 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part11 | Test Report | 2022-03-29 | PDF 5.5 MB |
| 03 FCC Test Report_NII_Part12 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part13 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part14 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part15 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part16 | Test Report | 2022-03-29 | PDF 5 MB |
| 03 FCC Test Report_NII_Part17 | Test Report | 2022-03-29 | PDF 5.1 MB |
| 03 FCC Test Report_NII_Part18 | Test Report | 2022-03-29 | PDF 5.1 MB |
| 03 FCC Test Report_NII_Part19 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part2 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part20 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part21 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part22 | Test Report | 2022-03-29 | PDF 5.5 MB |
| 03 FCC Test Report_NII_Part23 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part24 | Test Report | 2022-03-29 | PDF 5.1 MB |
| 03 FCC Test Report_NII_Part25 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part26 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part27 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part28 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part29 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part3 | Test Report | 2022-03-29 | PDF 5.1 MB |
| 03 FCC Test Report_NII_Part30 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part31 | Test Report | 2022-03-29 | PDF 5.4 MB |
| 03 FCC Test Report_NII_Part32 | Test Report | 2022-03-29 | PDF 5.5 MB |
| 03 FCC Test Report_NII_Part4 | Test Report | 2022-03-29 | PDF 5.4 MB |
| 03 FCC Test Report_NII_Part5 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 03 FCC Test Report_NII_Part6 | Test Report | 2022-03-29 | PDF 5.5 MB |
| 03 FCC Test Report_NII_Part7 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part8 | Test Report | 2022-03-29 | PDF 5.2 MB |
| 03 FCC Test Report_NII_Part9 | Test Report | 2022-03-29 | PDF 5.3 MB |
| 01 FCC 2.911(d)(5) Attestation | Attestation Statements | 2024-09-25 | PDF 82.5 KB |
| 01 FCC Agent Attestation_Agent | Attestation Statements | 2024-09-25 | PDF 142.3 KB |
| 01 FCC Agent Attestation_Applicant | Attestation Statements | 2024-09-25 | PDF 100.1 KB |
| 01 FCC 2.911(d)(5) Attestation | Attestation Statements | 2023-06-01 | PDF 117.4 KB |
| 01 FCC Agent Attestation_Agent | Attestation Statements | 2023-06-01 | PDF 138.5 KB |
| 01 FCC Agent Attestation_Applicant | Attestation Statements | 2023-06-01 | PDF 93.3 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2024-09-25 | PDF 110.9 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2024-09-25 | PDF 126.2 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2024-09-25 | PDF 102.8 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2024-09-25 | PDF 98.9 KB |
| 02 FCC Special Power of Attorney | Cover Letter(s) | 2024-09-25 | PDF 98.9 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2023-06-01 | PDF 66.3 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2023-06-01 | PDF 145.2 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2023-06-01 | PDF 99 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2023-06-01 | PDF 92.7 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2022-03-29 | PDF 36.2 KB |
| 02 FCC LMA Letter | Cover Letter(s) | 2022-03-29 | PDF 87.5 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2022-03-29 | PDF 33.2 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2022-03-29 | PDF 17.5 KB |
| 03 FCC RF Exposure | RF Exposure Info | 2024-09-25 | PDF 147.8 KB |
| 03 FCC RF Exposure | RF Exposure Info | 2023-06-01 | PDF 137.2 KB |
| 03 FCC RF Exposure | RF Exposure Info | 2022-03-29 | PDF 132.7 KB |
| 07 Confidential_Block Diagram Metadata only | Block Diagram | PDF 149 KB | |
| 09 Confidential_Schematics Metadata only | Schematics | PDF 107.8 KB | |
| 05 Confidential_Operational Description-Interface Specification Metadata only | Operational Description | PDF 4.4 MB | |
| 05 Confidential_Operational Description-Specification Metadata only | Operational Description | PDF 117.2 KB | |
| 05 Confidential_Theory of Operation Metadata only | Operational Description | PDF 121.5 KB | |
| 05 Confidential_Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 4.3 MB | |
| 08 Confidential_Theory of Operation Metadata only | Operational Description | PDF 102.8 KB | |
| 08 Confidential_Theory of Operation-Antenna Specification_PIFA(ANTS2M2-CSG03)_AN Metadata only | Operational Description | PDF 307.1 KB | |
| 08 Confidential_Theory of Operation-Antenna Specification_PIFA(ANTS2M2-CSG04)_AN Metadata only | Operational Description | PDF 296.7 KB | |
| 08 Confidential_Theory of Operation-Antenna Specification_PIFA(L34RF071)_ANT1-2 Metadata only | Operational Description | PDF 337.9 KB | |
| 08 Confidential_Theory of Operation-Antenna Specification_PIFA(L34RF072)_ANT3-4 Metadata only | Operational Description | PDF 322.6 KB | |
| 08 Confidential_Theory of Operation-Channel List Metadata only | Operational Description | PDF 33.4 KB | |
| 08 Confidential_Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 454.6 KB | |
| 08 Confidential_Theory of Operation-Software Security Metadata only | Operational Description | PDF 102.1 KB |
Application Information
| Application ID | m9FRhOmIRAzb9pHKPPyj6w== |
|---|---|
| Final Action Date | 2024-09-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003739166 |
| Model | M21DFD1 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless communication module |
| Responsible Party | Kazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf-1@sony.com  , 81-50-3141-6220 |
| Agent | Akiyo Akiyo Akiyo, UL Japan, Inc., Akiyo.Hayashi@ul.com  , 81-596-24-8999 |
| Technical Contact | Takayuki Shimada, UL Japan, Inc., Takayuki.Shimada@ul.com , 81-596-24-8999 |
| Test Firm | Takayuki Shimada, UL Japan, Inc.(Ise), Takayuki.Shimada@ul.com , 81-596-24-8999 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/25/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m9FRhOmIRAzb9pHKPPyj6w== | 2024-09-25 | Class II permissive change or modification of presently authorized equipment |
| gHaErebd3KU8+xzvaTn5qA== | 2024-09-25 | Class II permissive change or modification of presently authorized equipment |
| 0Gj6SIRVw9idW2DWIm8q5w== | 2024-09-25 | Class II permissive change or modification of presently authorized equipment |
| aa1e+O+InM7U92hQK6adMA== | 2023-06-01 | Class II permissive change or modification of presently authorized equipment |
| KqtDleyQWIjBNzQyx9wbTQ== | 2023-06-01 | Class II permissive change or modification of presently authorized equipment |
| /+X4bA81K5MXgQ/XvI0DhQ== | 2023-06-01 | Class II permissive change or modification of presently authorized equipment |
| zfQYENqf4JvBUOZG6vB8Xg== | 2022-03-29 | Original Equipment |
| IuctfGBlQe9+IvIK/ZtFzw== | 2022-03-29 | Original Equipment |
| DG4fIggK5up73sUY1IiAmA== | 2022-03-29 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zfQYENqf4JvBUOZG6vB8Xg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zfQYENqf4JvBUOZG6vB8Xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application m9FRhOmIRAzb9pHKPPyj6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Class II Permissive Change to add low power setting and specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application KqtDleyQWIjBNzQyx9wbTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Class II Permissive Change to add low power setting and specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application IuctfGBlQe9+IvIK/ZtFzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gHaErebd3KU8+xzvaTn5qA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DG4fIggK5up73sUY1IiAmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 03/29/2022 Application Dated: 03/29/2022 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application aa1e+O+InM7U92hQK6adMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3514 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0Gj6SIRVw9idW2DWIm8q5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 09/25/2024 Application Dated: 09/25/2024 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5320.0 | 0.0158 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0164 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0156 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Sony Group Corporation |
| 1-7-1 Konan |
| Minato-ku |
| Tokyo, 108-0075 Japan |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /+X4bA81K5MXgQ/XvI0DhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sony Group Corporation 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan |
Date of Grant: 06/01/2023 Application Dated: 05/31/2023 |
| Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AK8M21DFD1 |
| Name of Grantee: | Sony Group Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0031 |
| Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |