FCC ID AK8PSLX310BT

Stereo Turntable System

by Sony Group Corporation

Grantee Code: AK8   Product Code: PSLX310BT
Latest application date: 2018-12-25

FCC ID Device Details

FCC IDAK8PSLX310BT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAK8
Product CodePSLX310BT
Applicant BusinessSony Group Corporation 🇯🇵
Related Domains jp.sony.com sgs.com
Equipment ClassStereo Turntable System
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2018-12-25
2402-2480 MHzOriginal Equipment2018-12-25

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-12-25PDF 583.7 KB
Internal PhotosInternal Photos2018-12-25PDF 456 KB
External PhotosExternal Photos2018-12-25PDF 201.1 KB
ID Label/Location InfoID Label/Location Info2018-12-25PDF 281.2 KB
Test Setup PhotosTest Setup Photos2018-12-25PDF 326.4 KB
Test Setup PhotosTest Setup Photos2018-12-25PDF 328 KB
Test Report_DSSTest Report2018-12-25PDF 2.5 MB
Test Report_DTSTest Report2018-12-25PDF 1.1 MB
Antenna SpecCover Letter(s)2018-12-25PDF 1.7 MB
Declaration of authorizationCover Letter(s)2018-12-25PDF 15.6 KB
FCC_Power of AttorneyCover Letter(s)2018-12-25PDF 328.3 KB
confidentialityCover Letter(s)2018-12-25PDF 32.5 KB
MPERF Exposure Info2018-12-25PDF 128.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 136.8 KB
Schematics Metadata onlySchematicsPDF 251.4 KB
Schematics_Module Metadata onlySchematicsPDF 72.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 15.3 KB

Application Information

Application IDxUXmafuJM+Wd5V2H+/5Rkw==
Final Action Date2018-12-25
Application PurposeOriginal Equipment
Applicant FRN0003739166
ModelPSLX310BT
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionStereo Turntable System
Responsible PartyKazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220
Technical ContactDaphne Liang, Compliance Certification Services Inc., Daphne.liang@sgs.com , 886-6-580-2201
Non-Technical ContactDaphne Liang, Compliance Certification Services Inc., Daphne.liang@sgs.com , 886-6-580-2201
Test FirmKurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com , 886-3-3240332
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
xUXmafuJM+Wd5V2H+/5Rkw==2018-12-25Original Equipment
a4/Dv1wBPVm9KTIHl4iFeA==2018-12-25Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002500015C
2402-2480 MHz0.002100015C

Grants

TCB Grant - Application xUXmafuJM+Wd5V2H+/5Rkw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/25/2018

Application Dated: 12/24/2018
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSLX310BT
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Stereo Turntable System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0021  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application xUXmafuJM+Wd5V2H+/5Rkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 12/25/2018

Application Dated: 12/24/2018
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSLX310BT
Name of Grantee:  Sony Group Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Stereo Turntable System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0021  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application a4/Dv1wBPVm9KTIHl4iFeA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/25/2018

Application Dated: 12/24/2018
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSLX310BT
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: Stereo Turntable System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0025  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application a4/Dv1wBPVm9KTIHl4iFeA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 12/25/2018

Application Dated: 12/24/2018
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSLX310BT
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: Stereo Turntable System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0025  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: