FCC ID AK8PSP1001

PSP

by Sony Group Corporation

Grantee Code: AK8   Product Code: PSP1001
Latest application date: 2005-07-07

FCC ID Device Details

FCC IDAK8PSP1001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAK8
Product CodePSP1001
Applicant BusinessSony Group Corporation 🇯🇵
Related Domains jp.sony.com
Equipment ClassPSP
Test FirmJapan Qlty. Assur. Org. Safety & EMC Ctr

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-07-07
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2005-06-26
2412-2462 MHzOriginal Equipment2005-01-24

Exhibits

DocumentTypeAvailableFile
Users Manual Part 1Users Manual2005-01-24PDF 2.7 MB
Users Manual Part 2Users Manual2005-01-24PDF 2 MB
Users Manual Part 3Users Manual2005-01-24PDF 1.9 MB
Users Manual Part 4Users Manual2005-01-24PDF 2.1 MB
Internal Photos RevisedInternal Photos2005-06-26PDF 1.2 MB
Internal PhotosInternal Photos2005-01-24PDF 315.3 KB
External photosExternal Photos2005-07-07PDF 178 KB
External PhotosExternal Photos2005-01-24PDF 165.6 KB
Label LocationID Label/Location Info2005-01-24PDF 107 KB
Sample LabelID Label/Location Info2005-01-24PDF 43.4 KB
Test Photos 1Test Setup Photos2005-06-26PDF 139.1 KB
Test Photos 2Test Setup Photos2005-06-26PDF 139.1 KB
Test Photos RevisedTest Setup Photos2005-01-24PDF 116.9 KB
Test reportTest Report2005-07-07PDF 785.6 KB
Test Report 1Test Report2005-06-26PDF 740.3 KB
Test Report 2Test Report2005-06-26PDF 779.5 KB
Test Report Revision 2Test Report2005-01-24PDF 827.8 KB
FCC prenotice OKCover Letter(s)2005-07-07PDF 114.6 KB
POACover Letter(s)2005-07-07PDF 21.8 KB
Purpose of changeCover Letter(s)2005-07-07PDF 132.8 KB
Request for confidentialityCover Letter(s)2005-07-07PDF 16.2 KB
Confidentiality LetterCover Letter(s)2005-06-26PDF 16.2 KB
Copy of Original GrantCover Letter(s)2005-06-26PDF 98.6 KB
PC LetterCover Letter(s)2005-06-26PDF 329.5 KB
Q and ACover Letter(s)2005-06-26PDF 17.4 KB
Agent LetterCover Letter(s)2005-01-24PDF 21.3 KB
Confidentiality LetterCover Letter(s)2005-01-24PDF 18.5 KB
SARRF Exposure Info2005-07-07PDF 295.6 KB
SAR 2RF Exposure Info2005-07-07PDF 94 KB
SAR 3RF Exposure Info2005-07-07PDF 215.8 KB
SAR 5RF Exposure Info2005-07-07PDF 732.9 KB
Sar 4RF Exposure Info2005-07-07PDF 666.1 KB
Additional SAR DataRF Exposure Info2005-01-24PDF 60.6 KB
SAR Probe InformationRF Exposure Info2005-01-24PDF 507.8 KB
SAR Report RevisedRF Exposure Info2005-01-24PDF 441 KB
SAR Validation Dipole InformationRF Exposure Info2005-01-24PDF 949.6 KB
SAR Validation PlotsRF Exposure Info2005-01-24PDF 79.8 KB
Test PlotsRF Exposure Info2005-01-24PDF 295.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 13.1 KB
Block diagram Metadata onlyBlock DiagramPDF 13.1 KB
RF Block Metadata onlyBlock DiagramPDF 14.8 KB
System Block Metadata onlyBlock DiagramPDF 25.4 KB
Schemaitcs 4 RF Metadata onlySchematicsPDF 463.8 KB
Schematics 1 Metadata onlySchematicsPDF 115.6 KB
Schematics 1 Metadata onlySchematicsPDF 421 KB
Schematics 2 Metadata onlySchematicsPDF 812.4 KB
Schematics 2 Metadata onlySchematicsPDF 262.8 KB
Schematics 3 Metadata onlySchematicsPDF 2.1 MB
Schematics Revised Metadata onlySchematicsPDF 255.6 KB
Antenna Information Metadata onlyOperational DescriptionPDF 172.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 9.9 KB
Operational description Metadata onlyOperational DescriptionPDF 1.3 MB
Parts list Metadata onlyParts List/Tune Up InfoPDF 15.5 KB

Application Information

Application IDeAFoxfC+JYToNczJytkVNA==
Final Action Date2005-07-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003739166
ModelPSP1001
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPSP
Responsible PartyKazuyuki Hori, Chief EMC/RF Compliance Specialist, qec-pcom-emcrf@jp.sony.com , 81-50-3141-6220
AgentRachid Rachid Rachid, TUV Rheinland Japan Ltd, rachid.sehb@jpn.tuv.com
Technical ContactRachid Sehb, TUV Rheinland Japan Ltd., rachid.sehb@jpn.tuv.com
Test FirmHideki Kajiwara, Japan Qlty. Assur. Org. Safety & EMC Ctr, kajiwara-hideki@jqa.jp , 81-3-3416-0193
TCB Emailhotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg

Applications

Application IDDatePurpose
eAFoxfC+JYToNczJytkVNA==2005-07-07Class II permissive change or modification of presently authorized equipment
k/do4EQUKJ+uqRAOx3+0sw==2005-06-26Class II permissive change or modification of presently authorized equipment
JXoklMsvEIrJYj+2oZkmMw==2005-01-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.009800015C19

Grants

TCB Grant - Application k/do4EQUKJ+uqRAOx3+0sw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/26/2005

Application Dated: 06/26/2005
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

EAS Grant - Application k/do4EQUKJ+uqRAOx3+0sw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 06/26/2005

Application Dated: 06/26/2005
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

TCB Grant - Application JXoklMsvEIrJYj+2oZkmMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/24/2005

Application Dated: 01/24/2005
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

EAS Grant - Application JXoklMsvEIrJYj+2oZkmMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 01/24/2005

Application Dated: 01/24/2005
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

TCB Grant - Application eAFoxfC+JYToNczJytkVNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/07/2005

Application Dated: 07/07/2005
Sony Group Corporation
1-7-1 Konan
Minato-ku
Tokyo, 108-0075
Japan
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

EAS Grant - Application eAFoxfC+JYToNczJytkVNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sony Group Corporation
1-7-1 Konan Minato-ku
Tokyo, 108-0075
Japan
  Date of Grant: 07/07/2005

Application Dated: 07/07/2005
 
Attention: Kazuyuki Hori , Chief EMC/RF Compliance Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AK8PSP1001
Name of Grantee:  Sony Group Corporation
Equipment Class: Digital Transmission System
Notes: PSP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 15C 2412.0  -  2462.0 0.0098  

Power Output is Conducted. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.24 W/kg


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.

Mail To: