FCC ID ALH31113120
SINGLE CHANNEL MODE
by Kenwood USA Corporation
Grantee Code: ALH Product Code: 31113120
Latest application date: 2004-10-06
FCC ID Device Details
| FCC ID | ALH31113120 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ALH |
| Product Code | 31113120 |
| Applicant Business | Kenwood USA Corporation 🇺🇸 |
| Related Domains |  us.jvckenwood.com |
| Equipment Class | SINGLE CHANNEL MODE |
| Test Firm | Compliance Testing, LLC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 480-512 MHz | Class II permissive change or modification of presently authorized equipment | 2004-10-06 |
| 480-512 MHz | Original Equipment | 2000-11-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2000-11-07 | PDF 19.5 KB |
| display bottom | Internal Photos | 2000-11-07 | PDF 14.1 KB |
| display top | Internal Photos | 2000-11-07 | PDF 12.8 KB |
| final bottom | Internal Photos | 2000-11-07 | PDF 12.5 KB |
| final top | Internal Photos | 2000-11-07 | PDF 14.3 KB |
| vco bottom | Internal Photos | 2000-11-07 | PDF 17 KB |
| vco top | Internal Photos | 2000-11-07 | PDF 17.3 KB |
| bottom | External Photos | 2000-11-07 | PDF 20.7 KB |
| front | External Photos | 2000-11-07 | PDF 9.4 KB |
| left | External Photos | 2000-11-07 | PDF 9.5 KB |
| rear | External Photos | 2000-11-07 | PDF 12.2 KB |
| right | External Photos | 2000-11-07 | PDF 9.4 KB |
| top | External Photos | 2000-11-07 | PDF 14.3 KB |
| location | ID Label/Location Info | 2000-11-07 | PDF 10.5 KB |
| sample | ID Label/Location Info | 2000-11-07 | PDF 576.5 KB |
| RX VCO | Schematics | 2000-11-07 | PDF 1.2 MB |
| TX VCO | Schematics | 2000-11-07 | PDF 1.2 MB |
| TXRX left | Schematics | 2000-11-07 | PDF 1.1 MB |
| TXRX right | Schematics | 2000-11-07 | PDF 1.2 MB |
| control unit bottom left | Schematics | 2000-11-07 | PDF 1.3 MB |
| control unit bottom right | Schematics | 2000-11-07 | PDF 1.3 MB |
| control unit top left | Schematics | 2000-11-07 | PDF 1.3 MB |
| control unit top right | Schematics | 2000-11-07 | PDF 1.3 MB |
| display left | Schematics | 2000-11-07 | PDF 1.1 MB |
| display right | Schematics | 2000-11-07 | PDF 1.2 MB |
| final left | Schematics | 2000-11-07 | PDF 1 MB |
| final right | Schematics | 2000-11-07 | PDF 1 MB |
| circuit description | Operational Description | 2000-11-07 | PDF 24.1 KB |
| test report | Test Report | 2000-11-07 | PDF 247.2 KB |
| COVER LETTER | Cover Letter(s) | 2004-10-06 | PDF 715.3 KB |
| 01 December reply to OET request | Cover Letter(s) | 2000-11-07 | PDF 21.5 KB |
| parts list | Parts List/Tune Up Info | 2000-11-07 | PDF 82.8 KB |
| tune up info | Parts List/Tune Up Info | 2000-11-07 | PDF 14.1 KB |
Application Information
| Application ID | U6krxmj0rYKNZMiMGz7ptQ== |
|---|---|
| Final Action Date | 2004-10-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004356960 |
| Model | 31113120 |
| Frequency Range | 480-512 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | SINGLE CHANNEL MODE |
| Responsible Party | Angelina Seay, Regulatory Support Engineer, aseay@us.jvckenwood.com , 6784744701 |
| Test Firm | Michael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com  , 480-926-3100 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 40 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| U6krxmj0rYKNZMiMGz7ptQ== | 2004-10-06 | Class II permissive change or modification of presently authorized equipment |
| 7Rsfpmx2vB3ASqbH7+MoOA== | 2000-11-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application U6krxmj0rYKNZMiMGz7ptQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/06/2004 Application Dated: 10/06/2004 |
| Kenwood USA Corporation |
| 5000 Research Ct |
| Suite 700 |
| Suwanee, GA 30024 |
| Attention: Angelina Seay , Regulatory Support Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH31113120 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | SINGLE CHANNEL MODE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BO | 90, 90.210 | 480.0 - 512.0 | 15.0 | 1.5 PM | 16K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 16K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 15.0 | 1.5 PM | 11K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 11K0F3E |
| The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 40 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| BO: | The output power is continuously variable from the value listed in this entry to 60%-65% of the value listed. |
EAS Grant - Application U6krxmj0rYKNZMiMGz7ptQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kenwood USA Corporation 5000 Research Ct Suite 700 Suwanee, GA 30024 United States |
Date of Grant: 10/06/2004 Application Dated: 10/06/2004 |
| Attention: Angelina Seay , Regulatory Support Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH31113120 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | SINGLE CHANNEL MODE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BO | 90, 90.210 | 480.0 - 512.0 | 15.0 | 1.5 PM | 16K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 16K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 15.0 | 1.5 PM | 11K0F3E |
| BO | 90, 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 11K0F3E |
| The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 40 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| BO: | The output power is continuously variable from the value listed in this entry to 60%-65% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/07/2000 Application Dated: 11/07/2000 |
| Kenwood USA Corporation |
| 5000 Research Ct |
| Suite 700 |
| Suwanee, GA 30024 |
| Attention: Angelina Seay , Regulatory Support Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH31113120 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Single Channel Mode |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BO | 90 | 480.0 - 512.0 | 40.0 | 1.5 PM | 16K0F3E |
| BO | 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 11K0F3E |
| The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 40 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| BO: | The output power is continuously variable from the value listed in this entry to 60%-65% of the value listed. |
EAS Grant - Application 7Rsfpmx2vB3ASqbH7+MoOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kenwood USA Corporation 5000 Research Ct Suite 700 Suwanee, GA 30024 United States |
Date of Grant: 11/07/2000 Application Dated: 11/07/2000 |
| Attention: Angelina Seay , Regulatory Support Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH31113120 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Single Channel Mode |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BO | 90 | 480.0 - 512.0 | 40.0 | 1.5 PM | 16K0F3E |
| BO | 90.210 | 480.0 - 512.0 | 40.0 | 1.5 PM | 11K0F3E |
| The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 40 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. |
| BO: | The output power is continuously variable from the value listed in this entry to 60%-65% of the value listed. |
| Mail To: |