FCC ID ALH409001
900 MHz Digital Transceiver
by Kenwood USA Corporation
Grantee Code: ALH Product Code: 409001
Latest application date: 2013-02-19
FCC ID Device Details
| FCC ID | ALH409001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ALH |
| Product Code | 409001 |
| Applicant Business | Kenwood USA Corporation 🇺🇸 |
| Related Domains |  kenwoodusa.com |
| Equipment Class | 900 MHz Digital Transceiver |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 896-901 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-19 |
| 896-901 MHz | Original Equipment | 2011-11-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Instruction Manual | Users Manual | 2013-02-19 | PDF 475.9 KB |
| Instruction Manual | Users Manual | 2011-11-21 | PDF 475.9 KB |
| Internal Photos | Internal Photos | 2013-02-19 | PDF 481.1 KB |
| Internal Photos-MIC | Internal Photos | 2013-02-19 | PDF 417.6 KB |
| External Photos | External Photos | 2013-02-19 | PDF 210 KB |
| External Photos-MIC | External Photos | 2013-02-19 | PDF 120.7 KB |
| Label and Location Photos | ID Label/Location Info | 2013-02-19 | PDF 1.3 MB |
| Label and Location Photos | ID Label/Location Info | 2011-11-21 | PDF 1.3 MB |
| Test Setup Photos | Test Setup Photos | 2013-02-19 | PDF 297 KB |
| Test Setup Photos | Test Setup Photos | 2011-11-21 | PDF 745.7 KB |
| FCC Part 24 Part 90 Test Report | Test Report | 2013-02-19 | PDF 394.2 KB |
| SAR Test Report | RF Exposure Info | 2013-02-19 | PDF 2.7 MB |
| FCC Part 24 / Part 90 Test Report | Test Report | 2011-11-21 | PDF 673.1 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2013-02-19 | PDF 50.5 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2013-02-19 | PDF 63.7 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2013-02-19 | PDF 51.2 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2011-11-21 | PDF 49.4 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2011-11-21 | PDF 51.2 KB |
| RF Safety Information | RF Exposure Info | 2013-02-19 | PDF 491.5 KB |
| RF Safety Information | RF Exposure Info | 2011-11-21 | PDF 491.5 KB |
| SAR Report | RF Exposure Info | 2011-11-21 | PDF 4.9 MB |
Application Information
| Application ID | 8bBVLerB9lHxxegh3xu4/A== |
|---|---|
| Final Action Date | 2013-02-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004356960 |
| Model | 409001 |
| Frequency Range | 896-901 MHz |
| Equipment Class | PCF - PCS Licensed Transmitter held to face |
| Device Description | 900 MHz Digital Transceiver |
| Responsible Party | Joel E. Berger, Staff Engineer, jberger@kenwoodusa.com , 678 474-4700 |
| TCB Email | karens@compliancetesting.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add accessory mic with antenna port and KRA-39 antenna. Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessory are 1.21 W/kg and 1.88 W/kg, respectively. Note 1: 4K00F1D, 8K30F1D, 4K00F1E, 8K30F1E, 4K00F2D, 11K0F3E, 4K00F7W, 8K30F7W |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8bBVLerB9lHxxegh3xu4/A== | 2013-02-19 | Class II permissive change or modification of presently authorized equipment |
| 8AvPqWfyWtM7YL6oeI1wMA== | 2011-11-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 8bBVLerB9lHxxegh3xu4/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 02/19/2013 Application Dated: 02/19/2013 |
| Kenwood USA Corporation |
| 3970 Johns Creek Court |
| Suite 100 |
| Suwanee, GA 30024 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH409001 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | PCS Licensed Transmitter held to face |
| Notes: | 900 MHz Digital Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 24 | 901.0 - 902.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 24 | 940.0 - 941.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 90 | 896.0 - 901.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 90 | 935.0 - 940.0 | 2.5 | 1.0 PM | NOTE1 |
| Class II Permissive Change to add accessory mic with antenna port and KRA-39 antenna. Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessory are 1.21 W/kg and 1.88 W/kg, respectively. Note 1: 4K00F1D, 8K30F1D, 4K00F1E, 8K30F1E, 4K00F2D, 11K0F3E, 4K00F7W, 8K30F7W |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
EAS Grant - Application 8bBVLerB9lHxxegh3xu4/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kenwood USA Corporation 3970 Johns Creek Court Suite 100 Suwanee, GA 30024 United States |
Date of Grant: 02/19/2013 Application Dated: 02/19/2013 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH409001 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | PCS Licensed Transmitter held to face |
| Notes: | 900 MHz Digital Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 24 | 901.0 - 902.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 24 | 940.0 - 941.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 90 | 896.0 - 901.0 | 2.5 | 1.0 PM | NOTE1 |
| BJ | 90 | 935.0 - 940.0 | 2.5 | 1.0 PM | NOTE1 |
| Class II Permissive Change to add accessory mic with antenna port and KRA-39 antenna. Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessory are 1.21 W/kg and 1.88 W/kg, respectively. Note 1: 4K00F1D, 8K30F1D, 4K00F1E, 8K30F1E, 4K00F2D, 11K0F3E, 4K00F7W, 8K30F7W |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 11/21/2011 Application Dated: 11/21/2011 |
| Kenwood USA Corporation |
| 3970 Johns Creek Court |
| Suite 100 |
| Suwanee, GA 30024 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH409001 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | PCS Licensed Transmitter held to face |
| Notes: | 900MHz Digital Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 24 | 901.0 - 902.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 24 | 940.0 - 941.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 90 | 896.0 - 901.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 90 | 935.0 - 940.0 | 2.5 | 1.0 PM | NOTE 1 |
| Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Head: 0.56 W/kg; Body-worn: 1.35 W/kg. Note 1: 4K00F1D, 8K30F1D, 4K00F1E, 8K30F1E, 4K00F2D, 11K0F3E, 4K00F7W, 8K30F7W |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
EAS Grant - Application 8AvPqWfyWtM7YL6oeI1wMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kenwood USA Corporation 3970 Johns Creek Court Suite 100 Suwanee, GA 30024 United States |
Date of Grant: 11/21/2011 Application Dated: 11/21/2011 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH409001 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | PCS Licensed Transmitter held to face |
| Notes: | 900MHz Digital Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 24 | 901.0 - 902.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 24 | 940.0 - 941.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 90 | 896.0 - 901.0 | 2.5 | 1.0 PM | NOTE 1 |
| BJ | 90 | 935.0 - 940.0 | 2.5 | 1.0 PM | NOTE 1 |
| Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with a specific antenna(s) and accessories, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor are - Head: 0.56 W/kg; Body-worn: 1.35 W/kg. Note 1: 4K00F1D, 8K30F1D, 4K00F1E, 8K30F1E, 4K00F2D, 11K0F3E, 4K00F7W, 8K30F7W |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
| Mail To: |