FCC ID ALH458200
800 MHz Digital Transceiver
by Kenwood USA Corporation
Grantee Code: ALH Product Code: 458200
Latest application date: 2013-02-20
FCC ID Device Details
| FCC ID | ALH458200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ALH |
| Product Code | 458200 |
| Applicant Business | Kenwood USA Corporation 🇺🇸 |
| Related Domains |  kenwoodusa.com |
| Equipment Class | 800 MHz Digital Transceiver |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 806-809 MHz | Original Equipment | 2013-02-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Instruction Manual | Users Manual | 2013-02-20 | PDF 583.3 KB |
| Internal Photos | Internal Photos | 2013-02-20 | PDF 1.2 MB |
| External Photos | External Photos | 2013-02-20 | PDF 300.4 KB |
| Label and Location Photos | ID Label/Location Info | 2013-02-20 | PDF 662.8 KB |
| Test Setup Photos | Test Setup Photos | 2013-02-20 | PDF 244.1 KB |
| FCC Part 90 Test Repor | Test Report | 2013-02-20 | PDF 635 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2013-02-20 | PDF 50.4 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2013-02-20 | PDF 48 KB |
| RF Safety Information | RF Exposure Info | 2013-02-20 | PDF 16.6 KB |
| SAR Report | RF Exposure Info | 2013-02-20 | PDF 3 MB |
Application Information
| Application ID | KoEQGHl0b+/retuFozNvSA== |
|---|---|
| Final Action Date | 2013-02-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0004356960 |
| Model | 458200 |
| Frequency Range | 806-809 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | 800 MHz Digital Transceiver |
| Responsible Party | Joel E. Berger, Staff Engineer, jberger@kenwoodusa.com , 678 474-4700 |
| TCB Email | karens@compliancetesting.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna(s), and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessories are 1.16 W/kg and 2.57 W/kg, respectively. **NOTE1: 4K00F1D, 4K00F1E, 4K00F2D, 4K00F7W, 8K30F1D, 8K30F1E, 8K30F7W, 11K0F3E, 14K0F3E, 16K0F3E |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| KoEQGHl0b+/retuFozNvSA== | 2013-02-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application KoEQGHl0b+/retuFozNvSA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compliance Testing, LLC 1724 S. Nevada Way Mesa, AZ 85204 |
Date of Grant: 02/20/2013 Application Dated: 02/20/2013 |
| Kenwood USA Corporation |
| 3970 Johns Creek Court |
| Suite 100 |
| Suwanee, GA 30024 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH458200 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | 800 MHz Digital Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 809.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 809.0 - 824.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 851.0 - 854.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 854.0 - 869.0 | 3.0 | 1.0 PM | NOTE1 |
| Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna(s), and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessories are 1.16 W/kg and 2.57 W/kg, respectively. **NOTE1: 4K00F1D, 4K00F1E, 4K00F2D, 4K00F7W, 8K30F1D, 8K30F1E, 8K30F7W, 11K0F3E, 14K0F3E, 16K0F3E |
EAS Grant - Application KoEQGHl0b+/retuFozNvSA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kenwood USA Corporation 3970 Johns Creek Court Suite 100 Suwanee, GA 30024 United States |
Date of Grant: 02/20/2013 Application Dated: 02/20/2013 |
| Attention: Joel Berger , Staff Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ALH458200 |
| Name of Grantee: | Kenwood USA Corporation |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | 800 MHz Digital Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 809.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 809.0 - 824.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 851.0 - 854.0 | 3.0 | 1.0 PM | NOTE1 | |
| 90 | 854.0 - 869.0 | 3.0 | 1.0 PM | NOTE1 |
| Power output listed is at the antenna terminal on the device. Output Power Continuously Variable to 1 W. This transmitter has been tested for SAR compliance in Push-to-Talk and body-worn operating configurations with a specific antenna(s), and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to the specific belt-clip for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 50% duty factor for head and body-worn accessories are 1.16 W/kg and 2.57 W/kg, respectively. **NOTE1: 4K00F1D, 4K00F1E, 4K00F2D, 4K00F7W, 8K30F1D, 8K30F1E, 8K30F7W, 11K0F3E, 14K0F3E, 16K0F3E |
| Mail To: |