1. FCC ID
  2. AMW
  3. AMWUT601

FCC ID AMWUT601

Marine Radio with Wireless Microphone Capability

by Uniden America Corporation

Grantee Code: AMW   Product Code: UT601
Latest application date: 2005-05-11

FCC ID Device Details

FCC IDAMWUT601
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAMW
Product CodeUT601
Applicant BusinessUniden America Corporation 🇺🇸
Related Domains uniden.com
Equipment ClassMarine Radio with Wireless Microphone Capability
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2407-2478 MHzClass II permissive change or modification of presently authorized equipment2005-05-11
2407-2478 MHzOriginal Equipment2005-02-08
156.025-157.425 MHzOriginal Equipment2005-02-08

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2005-02-08PDF 1.9 MB
internal photosInternal Photos2005-02-08PDF 1.8 MB
internal photos 1Internal Photos2005-02-08PDF 241.1 KB
internal photos 2Internal Photos2005-02-08PDF 202.1 KB
internal photos 3Internal Photos2005-02-08PDF 123.8 KB
internal photos 4Internal Photos2005-02-08PDF 216.7 KB
internal photos 5Internal Photos2005-02-08PDF 298 KB
internal photos 6Internal Photos2005-02-08PDF 315.9 KB
internal photos 7Internal Photos2005-02-08PDF 257.8 KB
external photosExternal Photos2005-02-08PDF 242.9 KB
external photos 1External Photos2005-02-08PDF 117.5 KB
external photos 2External Photos2005-02-08PDF 106.9 KB
label locationID Label/Location Info2005-02-08PDF 127 KB
label sampleID Label/Location Info2005-02-08PDF 15.8 KB
test setup photosTest Setup Photos2005-05-11PDF 57.1 KB
test setup photosTest Setup Photos2005-02-08PDF 46.6 KB
test reportTest Report2005-05-11PDF 134.8 KB
test reportTest Report2005-02-08PDF 990.2 KB
test reportTest Report2005-02-08PDF 303.6 KB
test report addendumTest Report2005-02-08PDF 49 KB
attestation satementAttestation Statements2005-02-08PDF 160.4 KB
attestation statements Metadata onlyAttestation Statements2005-02-08PDF 29.5 KB
class II change letterCover Letter(s)2005-05-11PDF 1.1 MB
request for confidentialityCover Letter(s)2005-02-08PDF 93.3 KB
request for confidentialityCover Letter(s)2005-02-08PDF 93.3 KB
parts listParts List/Tune Up Info2005-02-08PDF 7.6 KB
tune up informationParts List/Tune Up Info2005-02-08PDF 19 KB
block diagram Metadata onlyBlock DiagramPDF 384.1 KB
schematics Metadata onlySchematicsPDF 835.5 KB
operational description Metadata onlyOperational DescriptionPDF 31.8 KB
operational description 1 Metadata onlyOperational DescriptionPDF 307.3 KB
operational description 2 Metadata onlyOperational DescriptionPDF 31.8 KB

Application Information

Application IDbFx/sxBIcTsqbUs0mZ36pg==
Final Action Date2005-05-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0001657303
ModelUT601
Frequency Range2407-2478 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMarine Radio with Wireless Microphone Capability
Responsible PartyPaul Roby, sroby@uniden.com , 817-858-3624
Test FirmS Sanders, Timco Engineering, Inc., info@timcoengr.com , 888-472-2424
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
bFx/sxBIcTsqbUs0mZ36pg==2005-05-11Class II permissive change or modification of presently authorized equipment
U7jYkOWdfEpwllxqGLFCKg==2005-02-08Original Equipment
3OcOoV1TsFPDvaFnnN5WsA==2005-02-08Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
156.025-157.425 MHz250.0005%16K0F3E80.1101(c)(4)
156.025-157.425 MHz10.0005%16K0F3E80.1101(c)(4)
156.525 MHz250.0005%12K6F2D80.1101(c)(4)
156.525 MHz10.0005%12K6F2D80.1101(c)(4)
2407-2478 MHz0.158000015C

Grants

TCB Grant - Application U7jYkOWdfEpwllxqGLFCKg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 02/08/2005

Application Dated: 02/08/2005
Uniden America Corporation
6225 N. State Highway 161
Suite 300
Irving, TX 75038
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wireless Microphone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2407.0  -  2478.0 0.158  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application U7jYkOWdfEpwllxqGLFCKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Uniden America Corporation
6225 N. State Highway 161 Suite 300
Irving, TX 75038
United States 		  Date of Grant: 02/08/2005

Application Dated: 02/08/2005
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Digital Transmission System
Notes: 2.4GHz Wireless Microphone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2407.0  -  2478.0 0.158  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application bFx/sxBIcTsqbUs0mZ36pg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 05/11/2005

Application Dated: 05/11/2005
Uniden America Corporation
6225 N. State Highway 161
Suite 300
Irving, TX 75038
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Digital Transmission System
Notes: Marine Radio with Wireless Microphone Capability
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2407.0  -  2478.0 0.158  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application bFx/sxBIcTsqbUs0mZ36pg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Uniden America Corporation
6225 N. State Highway 161 Suite 300
Irving, TX 75038
United States 		  Date of Grant: 05/11/2005

Application Dated: 05/11/2005
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Digital Transmission System
Notes: Marine Radio with Wireless Microphone Capability
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2407.0  -  2478.0 0.158  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 3OcOoV1TsFPDvaFnnN5WsA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 02/08/2005

Application Dated: 02/08/2005
Uniden America Corporation
6225 N. State Highway 161
Suite 300
Irving, TX 75038
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Part 80 VHF Transmitter (GMDSS)
Notes: Marine VHF Radio (GMDSS) with Wireless Mircrophone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
80.1101(c)(4) 156.025  -  157.425 25.0 0.0005  % 16K0F3E
80.1101(c)(4) 156.025  -  157.425 1.0 0.0005  % 16K0F3E
80.1101(c)(4) 156.525  -  156.525 25.0 0.0005  % 12K6F2D
80.1101(c)(4) 156.525  -  156.525 1.0 0.0005  % 12K6F2D

Power listed is conducted. The duty factor is not to exceed 50%. Users and installers must be provided with training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 3 feet for small antenna and 6 feet for large antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

EAS Grant - Application 3OcOoV1TsFPDvaFnnN5WsA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Uniden America Corporation
6225 N. State Highway 161 Suite 300
Irving, TX 75038
United States 		  Date of Grant: 02/08/2005

Application Dated: 02/08/2005
 
Attention: Paul Roby

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AMWUT601
Name of Grantee:  Uniden America Corporation
Equipment Class: Part 80 VHF Transmitter (GMDSS)
Notes: Marine VHF Radio (GMDSS) with Wireless Mircrophone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
80.1101(c)(4) 156.025  -  157.425 25.0 0.0005  % 16K0F3E
80.1101(c)(4) 156.025  -  157.425 1.0 0.0005  % 16K0F3E
80.1101(c)(4) 156.525  -  156.525 25.0 0.0005  % 12K6F2D
80.1101(c)(4) 156.525  -  156.525 1.0 0.0005  % 12K6F2D

Power listed is conducted. The duty factor is not to exceed 50%. Users and installers must be provided with training information, antenna installation, and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 3 feet for small antenna and 6 feet for large antenna from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.



Mail To: