FCC ID ANSBP3591
Wireless LAN module
by ROHM Co., Ltd.
Grantee Code: ANS Product Code: BP3591
Latest application date: 2013-07-24
FCC ID Device Details
| FCC ID | ANSBP3591 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ANS |
| Product Code | BP3591 |
| Applicant Business | ROHM Co., Ltd. 🇯🇵 |
| Related Domains |  rohm.co.jp |
| Equipment Class | Wireless LAN module |
| Test Firm | UL Japan, Inc. Shonan EMC EMC Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-06 |
| 2412-2462 MHz | Original Equipment | 2012-02-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Short-term confidentiality_Users Manual | Users Manual | 2013-03-05 | PDF 2.5 MB |
| User Manual | Users Manual | 2012-02-23 | PDF 536.6 KB |
| Internal Photo | Internal Photos | 2012-02-23 | PDF 313.6 KB |
| External Photo | External Photos | 2013-07-24 | PDF 293.6 KB |
| External Photo | External Photos | 2012-02-23 | PDF 478.4 KB |
| Label Drawing(for printer) | ID Label/Location Info | 2012-09-06 | PDF 39 KB |
| Label Location(for printer) | ID Label/Location Info | 2012-09-06 | PDF 78.7 KB |
| Label | ID Label/Location Info | 2012-02-23 | PDF 43.1 KB |
| Label Position | ID Label/Location Info | 2012-02-23 | PDF 187.8 KB |
| FCC Setup photo | Test Setup Photos | 2013-07-24 | PDF 218.1 KB |
| Short-term confidentiality_FCC SAR Test Setup Photo | Test Setup Photos | 2013-03-05 | PDF 517.8 KB |
| test setup photo | Test Setup Photos | 2012-02-23 | PDF 742.7 KB |
| FCC Report | Test Report | 2013-07-24 | PDF 556.5 KB |
| FCC SAR Report | Test Report | 2012-09-06 | PDF 610.5 KB |
| FCC SAR Test Data | Test Report | 2012-09-06 | PDF 347 KB |
| FCC SAR Test Instruments | Test Report | 2012-09-06 | PDF 3.1 MB |
| report | Test Report | 2012-02-23 | PDF 1.4 MB |
| FCC Authorization Letter | Cover Letter(s) | 2013-07-24 | PDF 318.9 KB |
| FCC Class 2 Permissive Change Letter | Cover Letter(s) | 2013-07-24 | PDF 325.7 KB |
| FCC LMA Letter | Cover Letter(s) | 2013-07-24 | PDF 534.7 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2013-07-24 | PDF 274.1 KB |
| Letter of Agency | Cover Letter(s) | 2012-09-06 | PDF 205.8 KB |
| Request for Class II Permissive Change | Cover Letter(s) | 2012-09-06 | PDF 193.1 KB |
| Request for Short-Term Confidentiality | Cover Letter(s) | 2012-09-06 | PDF 187.5 KB |
| Authorization Letter | Cover Letter(s) | 2012-02-23 | PDF 328.7 KB |
| LMA letter | Cover Letter(s) | 2012-02-23 | PDF 637.9 KB |
| Request for confidentiality letter | Cover Letter(s) | 2012-02-23 | PDF 291.5 KB |
| FCC RF Exposure sheet | RF Exposure Info | 2013-07-24 | PDF 53.2 KB |
| RF Exposure | RF Exposure Info | 2012-02-23 | PDF 52.2 KB |
Application Information
| Application ID | bHedr9qULg1fsB82Ou4qag== |
|---|---|
| Final Action Date | 2013-07-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0016914889 |
| Model | BP3591 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN module |
| Responsible Party | Yukito Toriumi, Group Manager, pm@rohm.co.jp , 81-75-311-7068 |
| Agent | Yoshinobu Yoshinobu Yoshinobu, UL Japan, Inc., Yoshinobu.Asai@ul.com  , 81-596-24-8116 |
| Technical Contact | Toyokazu Imamura, UL Japan, Inc., Toyokazu.Imamura@ul.com , 81-463-50-6400 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Shonan EMC EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , 81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antenna subject to mobile configuration as described in the filing. Output power listed is Conducted. Separate evaluation must be required for another portable configuration except September 6,2012 class II permissive change. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Host systems must provide regulated supply voltages to the module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bHedr9qULg1fsB82Ou4qag== | 2013-07-24 | Class II permissive change or modification of presently authorized equipment |
| TJpvTkq5g+Cgv45Dl1tp6Q== | 2012-09-06 | Class II permissive change or modification of presently authorized equipment |
| nIlL2cxRA30+ijpegfUhYg== | 2012-02-23 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TJpvTkq5g+Cgv45Dl1tp6Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| ROHM Co., Ltd. |
| 21 Saiin Mizosaki-cho Ukyo-ku |
| Kyoto, 615-8585 Japan |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change to add specific portable host configuration subject to professional installation as described in the filing. Output power listed is Conducted. Separate evaluation must be required for another portable configuration except this filing. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value is: 0.41 W/kg. |
EAS Grant - Application TJpvTkq5g+Cgv45Dl1tp6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ROHM Co., Ltd. 21 Saiin Mizosaki-cho Ukyo-ku P.O. Box , Kyoto, 615-8585 Japan |
Date of Grant: 09/06/2012 Application Dated: 09/05/2012 |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change to add specific portable host configuration subject to professional installation as described in the filing. Output power listed is Conducted. Separate evaluation must be required for another portable configuration except this filing. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value is: 0.41 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 02/23/2012 Application Dated: 02/23/2012 |
| ROHM Co., Ltd. |
| 21 Saiin Mizosaki-cho Ukyo-ku |
| Kyoto, 615-8585 Japan |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Single Limited Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application nIlL2cxRA30+ijpegfUhYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ROHM Co., Ltd. 21 Saiin Mizosaki-cho Ukyo-ku P.O. Box , Kyoto, 615-8585 Japan |
Date of Grant: 02/23/2012 Application Dated: 02/23/2012 |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Single Limited Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 07/24/2013 Application Dated: 07/24/2013 |
| ROHM Co., Ltd. |
| 21 Saiin Mizosaki-cho Ukyo-ku |
| Kyoto, 615-8585 Japan |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change to add specific antenna subject to mobile configuration as described in the filing. Output power listed is Conducted. Separate evaluation must be required for another portable configuration except September 6,2012 class II permissive change. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Host systems must provide regulated supply voltages to the module. |
EAS Grant - Application bHedr9qULg1fsB82Ou4qag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ROHM Co., Ltd. 21 Saiin Mizosaki-cho Ukyo-ku P.O. Box , Kyoto, 615-8585 Japan |
Date of Grant: 07/24/2013 Application Dated: 07/24/2013 |
| Attention: Yukito Toriumi , Group Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ANSBP3591 |
| Name of Grantee: | ROHM Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0524 | |||
| 15C | 2412.0 - 2462.0 | 0.1671 | |||
| 15C | 2412.0 - 2462.0 | 0.1306 |
| Class II Permissive Change to add specific antenna subject to mobile configuration as described in the filing. Output power listed is Conducted. Separate evaluation must be required for another portable configuration except September 6,2012 class II permissive change. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Host systems must provide regulated supply voltages to the module. |
| Mail To: |