FCC ID APYHRO00039

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 10/26/2004 Application Dated: 10/26/2004

Sharp Corporation

1 Takumi-cho, Sakai-ku, Sakai City

Osaka, 590-8522 Japan

Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	APYHRO00039
Name of Grantee:	Sharp Corporation
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	GSM-WCDMA Mobile-Phone / Bluetooth Enable

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.0007

Output power listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Sharp Corporation 1 Takumi-cho, Sakai-ku, Sakai City Osaka, 590-8522 Japan

Date of Grant: 10/26/2004 Application Dated: 10/26/2004

Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	APYHRO00039
Name of Grantee:	Sharp Corporation
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	GSM-WCDMA Mobile-Phone / Bluetooth Enable
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.0007

Output power listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

TCB Grant - Application AIHfjNMftaRgPsQ92UlTMQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 10/26/2004 Application Dated: 10/26/2004

Sharp Corporation

1 Takumi-cho, Sakai-ku, Sakai City

Osaka, 590-8522 Japan

Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	APYHRO00039
Name of Grantee:	Sharp Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	GSM-WCDMA Mobile-Phone / Bluetooth Enable

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.759	2.5  PM	252KGXW

Output listed is EIRP. This device contains 900/1800 MHz GSM and WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz GSM operations. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by Sharp or any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values with Bluetooth are: Head: 0.549 W/kg; Body-worn: 0.326 W/kg. The optional vehicle antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of section 2.1091. This device must transmit with a source-based time-averaging duty factor not exceeding 12.5%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions when the optional vehicle antenna is used for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Sharp Corporation 1 Takumi-cho, Sakai-ku, Sakai City Osaka, 590-8522 Japan

Date of Grant: 10/26/2004 Application Dated: 10/26/2004

Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	APYHRO00039
Name of Grantee:	Sharp Corporation
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	GSM-WCDMA Mobile-Phone / Bluetooth Enable
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	24E	1850.2  -  1909.8	0.759	2.5  PM	252KGXW

Output listed is EIRP. This device contains 900/1800 MHz GSM and WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz GSM operations. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by Sharp or any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values with Bluetooth are: Head: 0.549 W/kg; Body-worn: 0.326 W/kg. The optional vehicle antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of section 2.1091. This device must transmit with a source-based time-averaging duty factor not exceeding 12.5%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions when the optional vehicle antenna is used for satisfying RF exposure compliance.

Mail To: