1. FCC ID
  2. APY
  3. APYHRO00180

FCC ID APYHRO00180

Cellular Phone

by Sharp Corporation

Grantee Code: APY   Product Code: HRO00180
Latest application date: 2012-11-12

FCC ID Device Details

FCC IDAPYHRO00180
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAPY
Product CodeHRO00180
Applicant BusinessSharp Corporation 🇯🇵
Related Domains sharp.co.jp ul.com
Equipment ClassCellular Phone
Test FirmJapan Qlty. Assur. Org. Kita-Kansai Testing Center

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2012-11-12
5180-5240 MHzOriginal Equipment2012-11-12
2402-2480 MHzOriginal Equipment2012-11-12
13.56 MHzOriginal Equipment2012-11-12
824.2-848.8 MHzOriginal Equipment2012-11-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-12-24PDF 1.6 MB
Photos InternalInternal Photos2012-12-24PDF 481.3 KB
Photos ExternalExternal Photos2012-12-24PDF 459 KB
LabelID Label/Location Info2012-11-12PDF 2.1 MB
Label LetterID Label/Location Info2012-11-12PDF 27.2 KB
Photos SARTest Setup Photos2012-12-24PDF 199.5 KB
Photos Test SetupTest Setup Photos2012-12-24PDF 89.5 KB
Photos Test SetupTest Setup Photos2012-12-24PDF 731.8 KB
Photos Test SetupTest Setup Photos2012-12-24PDF 112.9 KB
Photos Test SetupTest Setup Photos2012-12-24PDF 78.7 KB
Photos Test SetupTest Setup Photos2012-12-24PDF 91.4 KB
Photos Test Setup GSM 1900Test Setup Photos2012-12-24PDF 77.8 KB
Photos Test Setup GSM 850Test Setup Photos2012-12-24PDF 77.8 KB
Photos Test Setup WCDMA 850Test Setup Photos2012-12-24PDF 76.3 KB
Test Report GSM 1900Test Report2012-11-12PDF 436.7 KB
Test Report GSM 850Test Report2012-11-12PDF 437 KB
Test Report WCDMA 850Test Report2012-11-12PDF 431.6 KB
Test reportTest Report2012-11-12PDF 366.3 KB
Test reportTest Report2012-11-12PDF 527.7 KB
Test reportTest Report2012-11-12PDF 870.6 KB
Test reportTest Report2012-11-12PDF 1.8 MB
Test reportTest Report2012-11-12PDF 1.7 MB
Bluetooth DoCCover Letter(s)2012-11-12PDF 174 KB
Conf LtrCover Letter(s)2012-11-12PDF 45.9 KB
Signatory LetterCover Letter(s)2012-11-12PDF 375.8 KB
SAR Appendix 1-2RF Exposure Info2012-11-12PDF 2.7 MB
SAR Appendix 3-4RF Exposure Info2012-11-12PDF 2.8 MB
SAR ReportRF Exposure Info2012-11-12PDF 431.9 KB

Application Information

Application IDqGq59YnamuDsl5f42xSgiw==
Final Action Date2012-11-12
Application PurposeOriginal Equipment
Applicant FRN0005810866
ModelHRO00180
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCellular Phone
Responsible PartyMasaaki Nishikawa, Vice President, Head of Quality Promotion Unit, nishikawa-masaaki@sharp.co.jp , 81 6 6625 1197
Technical ContactSteve Petruska, Sharp Electronics Corporation, spetrusk@sharpsec.com , 201-529-9689
Non-Technical ContactSteve Petruska, Sharp Electronics Corporation, aliza.zaffar@ul.com , 201-529-9689
Test FirmKousei Shibata, Japan Qlty. Assur. Org. Kita-Kansai Testing Center, shibata-kousei@jqa.jp , 81-72-640-5270
TCB Emailcertnotice@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/24/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported SAR for head, body-worn accessory including product specific (wireless router), and simultaneous transmission use conditions are < 0.1 W/kg, < 0.1 W/kg, < 0.1 W/kg, and 0.69 W/kg respectively. This device also contains functions that are not operational in U.S. territories.

Applications

Application IDDatePurpose
qGq59YnamuDsl5f42xSgiw==2012-11-12Original Equipment
mU0c7tavUm+iJHK1B27xJw==2012-11-12Original Equipment
cb1dtstTvJgZ7vj0Ads64g==2012-11-12Original Equipment
RAJMKyJRmIXzk1sPTAaY1A==2012-11-12Original Equipment
4ZCulkJcvk+fd/dPdw5ujw==2012-11-12Original Equipment
4QHBs6KdMAKc2eMnQUiqgw==2012-11-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
13.56 MHz15CCC
824.2-848.8 MHz1.4132.5ppm244KGXW22H
826.4-846.6 MHz0.2342.5ppm4M16F9W22H
1850.2-1908.8 MHz1.2882.5ppm245KGXW24E
2402-2480 MHz0.001980015CCC
2402-2480 MHz0.0008415CCC
2412-2462 MHz0.1448815CCC
5180-5240 MHz0.0137415ECC
5260-5320 MHz0.0136515ECC
5500-5700 MHz0.0200915ECC

Grants

TCB Grant - Application RAJMKyJRmIXzk1sPTAaY1A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application RAJMKyJRmIXzk1sPTAaY1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application qGq59YnamuDsl5f42xSgiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00084  
CC 15C 2412.0  -  2462.0 0.14488  

Power Output listed is Conducted. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported SAR for head, body-worn accessory including product specific (wireless router), and simultaneous transmission use conditions are < 0.1 W/kg, < 0.1 W/kg, < 0.1 W/kg, and 0.69 W/kg respectively. This device also contains functions that are not operational in U.S. territories.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qGq59YnamuDsl5f42xSgiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00084  
CC 15C 2412.0  -  2462.0 0.14488  

Power Output listed is Conducted. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported SAR for head, body-worn accessory including product specific (wireless router), and simultaneous transmission use conditions are < 0.1 W/kg, < 0.1 W/kg, < 0.1 W/kg, and 0.69 W/kg respectively. This device also contains functions that are not operational in U.S. territories.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mU0c7tavUm+iJHK1B27xJw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.01374  
CC 15E 5260.0  -  5320.0 0.01365  
CC 15E 5500.0  -  5700.0 0.02009  

Power output is conducted. SAR compliance for body-worn operation is based un a separation distance of 1.0 cm between the unit and the body of the user End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory and simultaneous use are: 0.11 W/kg, 0.38 W/kg, and 0.98 W/kg respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mU0c7tavUm+iJHK1B27xJw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.01374  
CC 15E 5260.0  -  5320.0 0.01365  
CC 15E 5500.0  -  5700.0 0.02009  

Power output is conducted. SAR compliance for body-worn operation is based un a separation distance of 1.0 cm between the unit and the body of the user End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory and simultaneous use are: 0.11 W/kg, 0.38 W/kg, and 0.98 W/kg respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application cb1dtstTvJgZ7vj0Ads64g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00198  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application cb1dtstTvJgZ7vj0Ads64g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00198  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4ZCulkJcvk+fd/dPdw5ujw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.413 2.5  PM 244KGXW
22H 826.4  -  846.6 0.234 2.5  PM 4M16F9W
24E 1850.2  -  1908.8 1.288 2.5  PM 245KGXW

Power output listed is ERP for bands below 1 GHz and EIRP for bands above 1 GHz. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, device specific (wireless hotspot), and simultaneous transmission use conditions are 0.31 W/kg, 0.59 W/kg, 0.59 W/kg, and 0.98 W/kg respectively. This device also contains functions that are not operational in U.S. territories.

EAS Grant - Application 4ZCulkJcvk+fd/dPdw5ujw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.413 2.5  PM 244KGXW
22H 826.4  -  846.6 0.234 2.5  PM 4M16F9W
24E 1850.2  -  1908.8 1.288 2.5  PM 245KGXW

Power output listed is ERP for bands below 1 GHz and EIRP for bands above 1 GHz. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, device specific (wireless hotspot), and simultaneous transmission use conditions are 0.31 W/kg, 0.59 W/kg, 0.59 W/kg, and 0.98 W/kg respectively. This device also contains functions that are not operational in U.S. territories.



TCB Grant - Application 4QHBs6KdMAKc2eMnQUiqgw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/12/2012

Application Dated: 11/12/2012
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4QHBs6KdMAKc2eMnQUiqgw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/12/2012

Application Dated: 11/12/2012
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00180
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: