1. FCC ID
  2. APY
  3. APYHRO00198

FCC ID APYHRO00198

Cellular Phone

by Sharp Corporation

Grantee Code: APY   Product Code: HRO00198
Latest application date: 2013-11-01

FCC ID Device Details

FCC IDAPYHRO00198
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAPY
Product CodeHRO00198
Applicant BusinessSharp Corporation 🇯🇵
Related Domains sharp.co.jp
Equipment ClassCellular Phone
Test FirmJapan Quality Assurance Org, Tsuru EMC Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2013-11-01
5180-5240 MHzOriginal Equipment2013-11-01
2402-2480 MHzOriginal Equipment2013-11-01
2402-2480 MHzOriginal Equipment2013-11-01
1850.2-1909.8 MHzOriginal Equipment2013-11-01

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2013-12-16PDF 1.8 MB
internal photosInternal Photos2013-12-16PDF 454.9 KB
external photosExternal Photos2013-12-16PDF 169.8 KB
ID-labelID Label/Location Info2013-11-01PDF 216.1 KB
label-locationID Label/Location Info2013-11-01PDF 216.1 KB
15E setup photosTest Setup Photos2013-12-16PDF 223.7 KB
BT test setupTest Setup Photos2013-12-16PDF 181.4 KB
NFC setup photosTest Setup Photos2013-12-16PDF 152.3 KB
Part 24 test setup photosTest Setup Photos2013-12-16PDF 164.6 KB
SAR setup photosTest Setup Photos2013-12-16PDF 179.3 KB
SAR test setup photosTest Setup Photos2013-12-16PDF 179.3 KB
WLAN test setup photosTest Setup Photos2013-12-16PDF 181.6 KB
test setup photosTest Setup Photos2013-12-16PDF 840.8 KB
15B test reportTest Report2013-11-01PDF 530.3 KB
15E test reportTest Report2013-11-01PDF 1.7 MB
DTS-DSS reportTest Report2013-11-01PDF 1,021.2 KB
DTS-dSS reportTest Report2013-11-01PDF 1,021.2 KB
NFC test reportTest Report2013-11-01PDF 367.8 KB
Part 24 test reportTest Report2013-11-01PDF 399.2 KB
SAR Test reportRF Exposure Info2013-11-01PDF 589.1 KB
SAR Test report Appendix IRF Exposure Info2013-11-01PDF 1.7 MB
SAR test reportRF Exposure Info2013-11-01PDF 589.1 KB
SAR test report Appendix 1RF Exposure Info2013-11-01PDF 774.6 KB
SAR test report Appendix 2RF Exposure Info2013-11-01PDF 826.9 KB
SAR test report Appendix 3RF Exposure Info2013-11-01PDF 889.7 KB
SAR test report Appendix 4RF Exposure Info2013-11-01PDF 1.7 MB
WLAN reportTest Report2013-11-01PDF 1 MB
DoC Bluetooth complianceAttestation Statements2013-11-01PDF 56 KB
confidentiality requestCover Letter(s)2013-11-01PDF 44.9 KB
SAR reportRF Exposure Info2013-11-01PDF 589.1 KB
SAR report Appendix 1RF Exposure Info2013-11-01PDF 774.6 KB
SAR report Appendix 2RF Exposure Info2013-11-01PDF 826.9 KB
SAR report Appendix 3RF Exposure Info2013-11-01PDF 889.7 KB
SAR report Appendix 4RF Exposure Info2013-11-01PDF 1.7 MB

Application Information

Application IDxSMFQrfMNW3XAzXw9RzhwQ==
Final Action Date2013-11-01
Application PurposeOriginal Equipment
Applicant FRN0005810866
ModelHRO00198
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionCellular Phone
Responsible PartyMasaaki Nishikawa, Vice President, Head of Quality Promotion Unit, nishikawa-masaaki@sharp.co.jp , 81 6 6625 1197
Test FirmKazuhisa Abe, Japan Quality Assurance Org, Tsuru EMC Branch, abe-kazuhisa@jqa.jp , 81-554-43-5517
TCB EmailLST.FRE.certnotice@ul.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/16/2013
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
xSMFQrfMNW3XAzXw9RzhwQ==2013-11-01Original Equipment
prdtkYKzEREh+B22vLlNrQ==2013-11-01Original Equipment
Pa01lZlIuASnX1YIC8fm2w==2013-11-01Original Equipment
IsVWALAKX0R37Ml64p84kA==2013-11-01Original Equipment
CR9c1lOK76M+XbEmoBr8jA==2013-11-01Original Equipment
7Fx1fuTisB3UQHAfDc80Lg==2013-11-01Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15B28, CC
13.56 MHz15CCC
1850.2-1909.8 MHz1.07200002.5000000000ppm245KGXW24E
2402-2480 MHz0.001600015CCC
2402-2480 MHz0.001215CCC
2412-2462 MHz0.169415CCC
5180-5240 MHz0.011715ECC
5260-5320 MHz0.011715ECC, ND
5500-5700 MHz0.012215ECC, ND

Grants

TCB Grant - Application xSMFQrfMNW3XAzXw9RzhwQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xSMFQrfMNW3XAzXw9RzhwQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application prdtkYKzEREh+B22vLlNrQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
28 CC 15B  - 


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application prdtkYKzEREh+B22vLlNrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
28 CC 15B  - 


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Pa01lZlIuASnX1YIC8fm2w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0117  
CC ND 15E 5260.0  -  5320.0 0.0117  
CC ND 15E 5500.0  -  5700.0 0.0122  

Power output is conducted. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions are 0.15 W/kg, 0.17 W/kg, and 0.54 W/kg, respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. This device supports 20MHz, 40MHz & 80MHz channel bandwidth operation.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Pa01lZlIuASnX1YIC8fm2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0117  
CC ND 15E 5260.0  -  5320.0 0.0117  
CC ND 15E 5500.0  -  5700.0 0.0122  

Power output is conducted. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions are 0.15 W/kg, 0.17 W/kg, and 0.54 W/kg, respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. This device supports 20MHz, 40MHz & 80MHz channel bandwidth operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application IsVWALAKX0R37Ml64p84kA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  

Power output listed is conducted. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IsVWALAKX0R37Ml64p84kA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  

Power output listed is conducted. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CR9c1lOK76M+XbEmoBr8jA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.1694  
CC 15C 2402.0  -  2480.0 0.0012  

Power Output listed is Conducted. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.14 W/kg, 0.43 W/kg, 0.43 W/kg, and 0.80 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CR9c1lOK76M+XbEmoBr8jA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.1694  
CC 15C 2402.0  -  2480.0 0.0012  

Power Output listed is Conducted. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.14 W/kg, 0.43 W/kg, 0.43 W/kg, and 0.80 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7Fx1fuTisB3UQHAfDc80Lg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/01/2013

Application Dated: 11/01/2013
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku
Quality Promotion Unit
Osaka, 545-8522
Japan
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Cellular Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.2  -  1909.8 1.072 2.5  PM 245KGXW

Output power is EIRP. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures.. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.31 W/kg, 0.37 W/kg, 0.37 W/kg, and 0.80 W/kg, respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application 7Fx1fuTisB3UQHAfDc80Lg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sharp Corporation
22-22 Nagaike-cho, Abeno-ku Quality Promotion Unit
Osaka, 545-8522
Japan 		  Date of Grant: 11/01/2013

Application Dated: 11/01/2013
 
Attention: Masaaki Nishikawa , Vice President, Head of Quality Promotion Unit

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00198
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Cellular Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1850.2  -  1909.8 1.072 2.5  PM 245KGXW

Output power is EIRP. This device and its antenna(s) must not be co-located or operated in conjunction with any antenna or transmitter except in accordance with FCC multi-transmitter RF exposure procedures.. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Body-worn operations are restricted to ones that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.31 W/kg, 0.37 W/kg, 0.37 W/kg, and 0.80 W/kg, respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



Mail To: