HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation

Sharp Corporation Smart Phone

FCC ID Filing: APYHRO00247
Purchase on Amazon: Smart Phone

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 2 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 3 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 4 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 5 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 6 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 7 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 8 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 9 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 10 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 11 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Page 12 of HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/12
System Check_Head_835MHz
DUT: D835V2­499
Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: HSL_850_170512 Medium parameters used: f = 835 MHz; σ = 0.867 S/m; εr = 40.569; ρ =
1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.5 ℃
DASY5 Configuration:
­ Probe: EX3DV4 ­ SN3955; ConvF(10.33, 10.33, 10.33); Calibrated: 2016/11/24;
­ Sensor­Surface: 1.4mm (Mechanical Surface Detection)
­ Electronics: DAE4 Sn1399; Calibrated: 2016/11/17
­ Phantom: SAM­Left; Type: QD 000 P40 C; Serial: TP­1446
­ Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 3.03 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 61.15 V/m; Power Drift = 0.00 dB
Peak SAR (extrapolated) = 3.44 W/kg
SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.51 W/kg
Maximum value of SAR (measured) = 3.02 W/kg
0 dB = 3.02 W/kg = 4.80 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/10
System Check_Body_835MHz
DUT: D835V2­499
Communication System: CW ; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: MSL_850_170510 Medium parameters used: f = 835 MHz; σ = 0.969 S/m; εr = 56.931; ρ =
1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.5 ℃
DASY5 Configuration:
­ Probe: EX3DV4 ­ SN3925; ConvF(9.91, 9.91, 9.91); Calibrated: 2016/5/26;
­ Sensor­Surface: 1.4mm (Mechanical Surface Detection)
­ Electronics: DAE3 Sn495; Calibrated: 2016/5/27
­ Phantom: SAM_Right; Type: QD000P40CD; Serial: 1884
­ Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 3.28 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 60.79 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 3.68 W/kg
SAR(1 g) = 2.51 W/kg; SAR(10 g) = 1.68 W/kg
Maximum value of SAR (measured) = 3.28 W/kg
0 dB = 3.28 W/kg = 5.16 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/11
System Check_Head_1900MHz
DUT: D1900V2­5d041
Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: HSL_1900_170511 Medium parameters used: f = 1900 MHz; σ = 1.396 S/m; εr = 38.367; ρ
= 1000 kg/m3
Ambient Temperature:23.4 ℃; Liquid Temperature:22.4 ℃
DASY5 Configuration:
­ Probe: ES3DV3 ­ SN3270; ConvF(5.08, 5.08, 5.08); Calibrated: 2016/8/26;
­ Sensor­Surface: 3mm (Mechanical Surface Detection)
­ Electronics: DAE4 Sn778; Calibrated: 2016/5/12
­ Phantom: SAM_Right; Type: QD000P40CD; Serial: 1884
­ Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 13.4 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 100.5 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 18.3 W/kg
SAR(1 g) = 10.3 W/kg; SAR(10 g) = 5.38 W/kg
Maximum value of SAR (measured) = 12.8 W/kg
0 dB = 12.8 W/kg = 11.07 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/10
System Check_Body_1900MHz
DUT: D1900V2­5d041
Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: MSL_1900_170510 Medium parameters used: f = 1900 MHz; σ = 1.535 S/m; εr = 53.015; ρ
= 1000 kg/m3
Ambient Temperature:23.7 ℃; Liquid Temperature:22.7 ℃
DASY5 Configuration:
­ Probe: EX3DV4 ­ SN3925; ConvF(8, 8, 8); Calibrated: 2016/5/26;
­ Sensor­Surface: 1.4mm (Mechanical Surface Detection)
­ Electronics: DAE3 Sn495; Calibrated: 2016/5/27
­ Phantom: SAM_Right; Type: QD000P40CD; Serial: 1884
­ Measurement SW: DASY52, Version 52.8 (8);SEMCAD X Version 14.6.10 (7331)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 16.1 W/kg
Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 105.7 V/m; Power Drift = ­0.03 dB
Peak SAR (extrapolated) = 17.9 W/kg
SAR(1 g) = 9.97 W/kg; SAR(10 g) = 5.21 W/kg
Maximum value of SAR (measured) = 15.1 W/kg
0 dB = 15.1 W/kg = 11.79 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/19
System Check_Head_2450MHz
DUT: D2450V2-926
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: HSL_2450_170519 Medium parameters used: f = 2450 MHz; σ = 1.79 mho/m; εr = 39.5; ρ
= 1000 kg/m3
Ambient Temperature:23.2 ℃; Liquid Temperature:22.2 ℃
DASY4 Configuration:
- Probe: ES3DV3 - SN3270; ConvF(4.51, 4.51, 4.51); Calibrated: 2016/8/26
- Sensor-Surface: 3mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn916; Calibrated: 2016/12/15
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated) = 19.1 mW/g
Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 95.4 V/m; Power Drift = 0.112 dB
Peak SAR (extrapolated) = 28.9 W/kg
SAR(1 g) = 13.3 mW/g; SAR(10 g) = 6.02 mW/g
Maximum value of SAR (measured) = 17.6 mW/g
0 dB = 17.6mW/g
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/27
System Check_Head_2450MHz
DUT: D2450V2­926
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: HSL_2450_170527 Medium parameters used: f = 2450 MHz; σ = 1.783 S/m; εr = 40.222;
ρ = 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.5 ℃
DASY5 Configuration
­ Probe: ES3DV3 ­ SN3169; ConvF(4.5, 4.5, 4.5); Calibrated: 2017/5/11;
­ Sensor­Surface: 3mm (Mechanical Surface Detection)
­ Electronics: DAE4 Sn853; Calibrated: 2016/7/11
­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801
­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7373)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 18.6 W/kg
Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 104.3 V/m; Power Drift = ­0.05 dB
Peak SAR (extrapolated) = 28.8 W/kg
SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.19 W/kg
Maximum value of SAR (measured) = 17.6 W/kg
0 dB = 17.6 W/kg = 12.46 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/19
System Check_Body_2450MHz
DUT: D2450V2-926
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: MSL_2450_170519 Medium parameters used: f = 2450 MHz; σ = 1.95 mho/m; εr = 54.8; ρ
= 1000 kg/m3
Ambient Temperature:23.2 ℃; Liquid Temperature:22.2 ℃
DASY4 Configuration:
- Probe: ES3DV3 - SN3270; ConvF(4.28, 4.28, 4.28); Calibrated: 2016/8/26
- Sensor-Surface: 3mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn916; Calibrated: 2016/12/15
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated) = 19.3 mW/g
Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 107.5 V/m; Power Drift = -0.079 dB
Peak SAR (extrapolated) = 25.4 W/kg
SAR(1 g) = 12.4 mW/g; SAR(10 g) = 5.77 mW/g
Maximum value of SAR (measured) = 18.9 mW/g
0 dB = 18.9mW/g
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/27
System Check_Body_2450MHz
DUT: D2450V2­926
Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: MSL_2450_170527 Medium parameters used: f = 2450 MHz; σ = 1.933 S/m; εr = 53.503;
ρ = 1000 kg/m3
Ambient Temperature:23.5 ℃; Liquid Temperature:22.5 ℃
DASY5 Configuration
­ Probe: ES3DV3 ­ SN3169; ConvF(4.28, 4.28, 4.28); Calibrated: 2017/5/11;
­ Sensor­Surface: 3mm (Mechanical Surface Detection)
­ Electronics: DAE4 Sn853; Calibrated: 2016/7/11
­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801
­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7373)
Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm
Maximum value of SAR (interpolated) = 15.9 W/kg
Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 94.10 V/m; Power Drift = ­0.05 dB
Peak SAR (extrapolated) = 23.4 W/kg
SAR(1 g) = 12 W/kg; SAR(10 g) = 5.68 W/kg
Maximum value of SAR (measured) = 15.8 W/kg
0 dB = 15.8 W/kg = 11.99 dBW/kg
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/20
System Check_Head_5250MHz
DUT: D5GHzV2-1006
Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: HSL_5G_170520 Medium parameters used: f = 5250 MHz; σ = 4.61 mho/m; εr = 36.8; ρ =
1000 kg/m3
Ambient Temperature:23.3 ℃; Liquid Temperature:22.3 ℃
DASY4 Configuration:
- Probe: EX3DV4 - SN3955; ConvF(5.04, 5.04, 5.04); Calibrated: 2016/11/24
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1399; Calibrated: 2016/11/17
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=100mW/Area Scan (71x71x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 19.8 mW/g
Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 72.5 V/m; Power Drift = 0.125 dB
Peak SAR (extrapolated) = 31.6 W/kg
SAR(1 g) = 8.11 mW/g; SAR(10 g) = 2.24 mW/g
Maximum value of SAR (measured) = 20.0 mW/g
0 dB = 20.0mW/g
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/20
System Check_Body_5250MHz
DUT: D5GHzV2-1006
Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: MSL_5G_170520 Medium parameters used: f = 5250 MHz; σ = 5.41 mho/m; εr = 47.9; ρ =
1000 kg/m3
Ambient Temperature:23.3 ℃; Liquid Temperature:22.3 ℃
DASY4 Configuration:
- Probe: EX3DV4 - SN3955; ConvF(4.51, 4.51, 4.51); Calibrated: 2016/11/24
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1399; Calibrated: 2016/11/17
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=100mW/Area Scan (71x71x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 17.2 mW/g
Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 66.7 V/m; Power Drift = 0.123 dB
Peak SAR (extrapolated) = 28.9 W/kg
SAR(1 g) = 7.35 mW/g; SAR(10 g) = 2.02 mW/g
Maximum value of SAR (measured) = 17.9 mW/g
0 dB = 17.9mW/g
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/20
System Check_Head_5600MHz
DUT: D5GHzV2-1006
Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: HSL_5G_170520 Medium parameters used: f = 5600 MHz; σ = 4.97 mho/m; εr = 36.3; ρ =
1000 kg/m3
Ambient Temperature:23.3 ℃; Liquid Temperature:22.3 ℃
DASY4 Configuration:
- Probe: EX3DV4 - SN3955; ConvF(4.5, 4.5, 4.5); Calibrated: 2016/11/24
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1399; Calibrated: 2016/11/17
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=100mW/Area Scan (71x71x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 22.6 mW/g
Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 76.0 V/m; Power Drift = 0.167 dB
Peak SAR (extrapolated) = 36.5 W/kg
SAR(1 g) = 8.94 mW/g; SAR(10 g) = 2.45 mW/g
Maximum value of SAR (measured) = 22.5 mW/g
0 dB = 22.5mW/g
Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab
Date: 2017/5/20
System Check_Body_5600MHz
DUT: D5GHzV2-1006
Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: MSL_5G_170520 Medium parameters used: f = 5600 MHz; σ = 5.87 mho/m; εr = 47.3; ρ =
1000 kg/m3
Ambient Temperature:23.3 ℃; Liquid Temperature:22.3 ℃
DASY4 Configuration:
- Probe: EX3DV4 - SN3955; ConvF(3.91, 3.91, 3.91); Calibrated: 2016/11/24
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1399; Calibrated: 2016/11/17
- Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1815
- ;Postprocessing SW: SEMCAD, V1.8 Build 159
Pin=100mW/Area Scan (71x71x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 19.2 mW/g
Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 69.4 V/m; Power Drift = 0.151 dB
Peak SAR (extrapolated) = 36.0 W/kg
SAR(1 g) = 8.48 mW/g; SAR(10 g) = 2.31 mW/g
Maximum value of SAR (measured) = 21.4 mW/g
0 dB = 21.4mW/g
Download: HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Mirror Download [FCC.gov]HRO00247 Smart Phone RF Exposure Info Test Report RFExp Appendix A Sharp Corporation
Document ID3424574
Application IDY7+pE5jdDS93agiGIQw5Uw==
Document DescriptionTest Report RFExp Appendix A
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize87.52kB (1093976 bits)
Date Submitted2017-06-13 00:00:00
Date Available2017-06-14 00:00:00
Creation Date2017-06-09 19:31:32
Producing SoftwareFoxit PhantomPDF Printer 版本 7.0.1.831
Document Lastmod2017-06-09 19:31:32
Document TitleTest Report RFExp Appendix A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : 
Create Date                     : 2017:06:09 19:31:32+08:00
Modify Date                     : 2017:06:09 19:31:32+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Creator Tool                    : 
Metadata Date                   : 2017:06:09 19:31:32+08:00
Keywords                        : 
Producer                        : Foxit PhantomPDF Printer 版本 7.0.1.831
Document ID                     : uuid:5ac6567e-9687-41f3-8d9b-7f88e3776d76
Instance ID                     : uuid:59b3219d-c59d-41ad-bad2-e81736526d4a
Page Count                      : 12
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017