FCC ID APYHRO00266

Smart Phone

by Sharp Corporation

Grantee Code: APY   Product Code: HRO00266
Latest application date: 2018-10-19

FCC ID Device Details

FCC IDAPYHRO00266
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAPY
Product CodeHRO00266
Applicant BusinessSharp Corporation 🇯🇵
Related Domains sharp.co.jp
Equipment ClassSmart Phone
Test FirmSGS Taiwan Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2018-10-19
5180-5240 MHzOriginal Equipment2018-10-19
13.56 MHzOriginal Equipment2018-10-19
699.7-715.3 MHzOriginal Equipment2018-10-19
2402-2480 MHzOriginal Equipment2018-10-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-04-17PDF 1.2 MB
Internal PhotosInternal Photos2019-04-17PDF 999.2 KB
External PhotosExternal Photos2019-04-17PDF 314.8 KB
Label LocationID Label/Location Info2018-10-19PDF 170.7 KB
Test Setup Photos BLETest Setup Photos2019-04-17PDF 301.6 KB
Test Setup Photos BT+EDRTest Setup Photos2019-04-17PDF 301.7 KB
Test Setup Photos DFS SlaveTest Setup Photos2019-04-17PDF 166.6 KB
Test Setup Photos NFCTest Setup Photos2019-04-17PDF 248.6 KB
Test Setup Photos P15.407Test Setup Photos2019-04-17PDF 301.9 KB
Test Setup Photos P22,24,27Test Setup Photos2019-04-17PDF 235.5 KB
Test Setup Photos SARTest Setup Photos2019-04-17PDF 793.3 KB
Test Setup Photos WLANTest Setup Photos2019-04-17PDF 301.6 KB
Test Setup Photos WirelessTest Setup Photos2019-04-17PDF 854.9 KB
Spot Check for Re-Use BT+WLAN+NFCTest Report2018-10-19PDF 459.8 KB
Test Report BLETest Report2018-10-19PDF 1.4 MB
Test Report BT+EDRTest Report2018-10-19PDF 3.3 MB
Test Report DFS SlaveTest Report2018-10-19PDF 1 MB
Test Report NFCTest Report2018-10-19PDF 742.8 KB
Test Report P22,24,27 Part 1Test Report2018-10-19PDF 4.7 MB
Test Report P22,24,27 Part 2Test Report2018-10-19PDF 4.8 MB
Test Report P22,24,27 Part 3Test Report2018-10-19PDF 4.7 MB
Test Report P22,24,27 Part 4Test Report2018-10-19PDF 878.7 KB
Test Report UNIITest Report2018-10-19PDF 4.6 MB
Test Report WLANTest Report2018-10-19PDF 2.6 MB
Test Report WirelessTest Report2018-10-19PDF 1.6 MB
Confidentiality Request LetterCover Letter(s)2018-10-19PDF 479.3 KB
Power of AttorneyCover Letter(s)2018-10-19PDF 387.1 KB
Re-Use Data DeclarationCover Letter(s)2018-10-19PDF 79.8 KB
WiFi 12 13ch Declaration LetterCover Letter(s)2018-10-19PDF 408 KB
SAR ReportRF Exposure Info2018-10-19PDF 2.8 MB
Block Diagram Metadata onlyBlock DiagramPDF 172.5 KB
Schematics Diagram Ant PCB Metadata onlySchematicsPDF 197.2 KB
Schematics Diagram Jack FPC Metadata onlySchematicsPDF 22.5 KB
Schematics Diagram Main PCB Metadata onlySchematicsPDF 3.6 MB
Schematics Diagram USB FPC Metadata onlySchematicsPDF 101.6 KB
Schematics Diagram WLAN PCB Metadata onlySchematicsPDF 172 KB
Schematics Jack FPC Metadata onlySchematicsPDF 22.5 KB
Schematics USB FPC Metadata onlySchematicsPDF 101.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 182.5 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 65.4 KB
Theory of Operation GSM Metadata onlyOperational DescriptionPDF 9.6 KB
Theory of Operation WCDMA LTE Metadata onlyOperational DescriptionPDF 23.1 KB
Theory of Operation WLAN BT Metadata onlyOperational DescriptionPDF 95.7 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 55.8 KB
Tune Up Procedure BT Metadata onlyParts List/Tune Up InfoPDF 109.1 KB
Tune Up Procedure GSM Metadata onlyParts List/Tune Up InfoPDF 24.7 KB
Tune Up Procedure LTE Metadata onlyParts List/Tune Up InfoPDF 218.3 KB
Tune Up Procedure NFC Metadata onlyParts List/Tune Up InfoPDF 10.8 KB
Tune Up Procedure WCDMA Metadata onlyParts List/Tune Up InfoPDF 231 KB
Tune Up Procedure WLAN Metadata onlyParts List/Tune Up InfoPDF 111.7 KB

Application Information

Application IDzQv0czRaM2Ggqz+A80UWJQ==
Final Action Date2018-10-19
Application PurposeOriginal Equipment
Applicant FRN0005810866
ModelHRO00266
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionSmart Phone
Responsible PartyTaihei Ohtsuka, Division Manager, Head of Quality promotion div., fcc-contact@sharp.co.jp , +81-50-5433-4157
Test FirmRyan Wang, SGS Taiwan Ltd., Ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/17/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
zQv0czRaM2Ggqz+A80UWJQ==2018-10-19Original Equipment
ZKiUbY1k+mmie3yTirD1Ag==2018-10-19Original Equipment
Z1gD8lro6Sbavo21xXw2iA==2018-10-19Original Equipment
YRqRbHOMuCN6gMQf+j0OXw==2018-10-19Original Equipment
XX6TnSOyeiB/DJjP78SfHw==2018-10-19Original Equipment
Lm47Y4+cJgdz9Ry2Lk2SLQ==2018-10-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
13.56 MHz15CCC
699.7-715.3 MHz0.1696.99Hz1M10D7W27
704-711 MHz0.1616.99Hz8M96D7W27
704-711 MHz0.2256.99Hz8M98G7D27
709-711 MHz0.2134.99Hz9M01G7D27
709-711 MHz0.1884.99Hz8M96D7W27
826.4-846.6 MHz0.176420Hz4M13F9W22H
826.5-846.5 MHz0.299.99Hz4M50G7D22H
826.5-846.5 MHz0.2479.99Hz4M50D7W22H
829-844 MHz0.2079.99Hz9M01G7D22H
829-844 MHz0.1729.99Hz8M97D7W22H
1850.2-1909.8 MHz0.41699.99Hz244KGXW24E
2402-2480 MHz0.00515CCC
2402-2480 MHz0.015000015CCC
2412-2462 MHz0.13815CCC
5180-5240 MHz0.019915ECC
5260-5320 MHz0.019915ECC
5500-5700 MHz0.019915ECC

Grants

TCB Grant - Application zQv0czRaM2Ggqz+A80UWJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zQv0czRaM2Ggqz+A80UWJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ZKiUbY1k+mmie3yTirD1Ag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission conditions are 0.15 W/kg, <0.10 W/kg, and 1.12 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZKiUbY1k+mmie3yTirD1Ag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission conditions are 0.15 W/kg, <0.10 W/kg, and 1.12 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Z1gD8lro6Sbavo21xXw2iA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0199  
CC 15E 5260.0  -  5320.0 0.0199  
CC 15E 5500.0  -  5700.0 0.0199  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission conditions are 1.44 W/kg, <0.10 W/kg, and 1.57 W/kg, respectively. This device supports 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Z1gD8lro6Sbavo21xXw2iA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0199  
CC 15E 5260.0  -  5320.0 0.0199  
CC 15E 5500.0  -  5700.0 0.0199  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission conditions are 1.44 W/kg, <0.10 W/kg, and 1.57 W/kg, respectively. This device supports 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YRqRbHOMuCN6gMQf+j0OXw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YRqRbHOMuCN6gMQf+j0OXw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application XX6TnSOyeiB/DJjP78SfHw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.304 500.0  Hz 243KGXW
24E 1850.2  -  1909.8 0.416 99.99  Hz 244KGXW
22H 826.4  -  846.6 0.176 420.0  Hz 4M13F9W
22H 826.5  -  846.5 0.29 9.99  Hz 4M50G7D
22H 826.5  -  846.5 0.247 9.99  Hz 4M50D7W
22H 829.0  -  844.0 0.207 9.99  Hz 9M01G7D
22H 829.0  -  844.0 0.172 9.99  Hz 8M97D7W
27 699.7  -  715.3 0.169 6.99  Hz 1M10D7W
27 704.0  -  711.0 0.225 6.99  Hz 8M98G7D
27 704.0  -  711.0 0.161 6.99  Hz 8M96D7W
27 709.0  -  711.0 0.213 4.99  Hz 9M01G7D
27 709.0  -  711.0 0.188 4.99  Hz 8M96D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.39 W/kg, 0.47 W/kg, 0.53 W/kg, and 1.57 W/kg, respectively. This device supports LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5, and 10MHz bandwidth modes for FDD LTE Band 17. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

EAS Grant - Application XX6TnSOyeiB/DJjP78SfHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 0.304 500.0  Hz 243KGXW
24E 1850.2  -  1909.8 0.416 99.99  Hz 244KGXW
22H 826.4  -  846.6 0.176 420.0  Hz 4M13F9W
22H 826.5  -  846.5 0.29 9.99  Hz 4M50G7D
22H 826.5  -  846.5 0.247 9.99  Hz 4M50D7W
22H 829.0  -  844.0 0.207 9.99  Hz 9M01G7D
22H 829.0  -  844.0 0.172 9.99  Hz 8M97D7W
27 699.7  -  715.3 0.169 6.99  Hz 1M10D7W
27 704.0  -  711.0 0.225 6.99  Hz 8M98G7D
27 704.0  -  711.0 0.161 6.99  Hz 8M96D7W
27 709.0  -  711.0 0.213 4.99  Hz 9M01G7D
27 709.0  -  711.0 0.188 4.99  Hz 8M96D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.39 W/kg, 0.47 W/kg, 0.53 W/kg, and 1.57 W/kg, respectively. This device supports LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5, and 10MHz bandwidth modes for FDD LTE Band 17. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



TCB Grant - Application Lm47Y4+cJgdz9Ry2Lk2SLQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/19/2018

Application Dated: 10/18/2018
Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.138  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission conditions are 0.57 W/kg, 0.10 W/kg, 0.14 W/kg, and 0.96 W/kg, respectively. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Lm47Y4+cJgdz9Ry2Lk2SLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sharp Corporation
1 Takumi-cho, Sakai-ku, Sakai City
Osaka, 590-8522
Japan
  Date of Grant: 10/19/2018

Application Dated: 10/18/2018
 
Attention: Taihei Ohtsuka , Division Manager, Head of Quality promotion div.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  APYHRO00266
Name of Grantee:  Sharp Corporation
Equipment Class: Digital Transmission System
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.138  

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission conditions are 0.57 W/kg, 0.10 W/kg, 0.14 W/kg, and 0.96 W/kg, respectively. This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: