FCC ID AQZ-RF-7800W-G2
The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul.
by Harris Corporation RF Communications Division
Grantee Code: AQZ Product Code: RF7800WG2
Latest application date: 2018-08-09
FCC ID Device Details
| FCC ID | AQZ-RF-7800W-G2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AQZ |
| Product Code | RF7800WG2 |
| Applicant Business | Harris Corporation RF Communications Division 🇺🇸 |
| Related Domains |  harris.com |
| Equipment Class | The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Test Firm | EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5170-5247.5 MHz | Class II permissive change or modification of presently authorized equipment | 2018-08-09 |
| 5727.5-5847.5 MHz | Original Equipment | 2015-12-20 |
| 4942.5-4987.5 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-20 |
| 4942.5-4987.5 MHz | Original Equipment | 2013-08-28 |
| 5727.5-5847.5 MHz | Original Equipment | 2013-08-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Revised User Manual - Draft | Users Manual | 2018-08-09 | PDF 2.2 MB |
| User Manual Draft | Users Manual | 2018-08-09 | PDF 151 KB |
| Same Exhibit as Previous Application | Internal Photos | 2015-12-20 | PDF 18.7 KB |
| Same Exhibit as Previous Application | External Photos | 2015-12-20 | PDF 18.7 KB |
| Exterior Photos | External Photos | 2013-08-28 | PDF 1.7 MB |
| external photos | External Photos | 2013-08-28 | PDF 1.7 MB |
| Same Exhibit as Previous Application | ID Label/Location Info | 2015-12-20 | PDF 18.7 KB |
| Label and Location | ID Label/Location Info | 2013-08-28 | PDF 177.5 KB |
| Label info and Location | ID Label/Location Info | 2013-08-28 | PDF 177.5 KB |
| Same Exhibit as Previous Application | Block Diagram | 2015-12-20 | PDF 18.7 KB |
| Same Exhibit as Previous Application | Schematics | 2015-12-20 | PDF 18.7 KB |
| Theory of Operation Metadata only | Operational Description | 2015-12-20 | PDF 721 KB |
| Same Exhibit as Previous Application | Test Setup Photos | 2015-12-20 | PDF 18.7 KB |
| Test Setup Photos | Test Setup Photos | 2013-08-28 | PDF 427 KB |
| test setup photos | Test Setup Photos | 2013-08-28 | PDF 427 KB |
| Test Report DFS | Test Report | 2018-08-09 | PDF 3.5 MB |
| Test Report UNII 1 Part 1 | Test Report | 2018-08-09 | PDF 5.3 MB |
| Test Report UNII 1 Part 2 | Test Report | 2018-08-09 | PDF 3.8 MB |
| Test Report UNII 1 Part 3 | Test Report | 2018-08-09 | PDF 3.8 MB |
| Test Report UNII 1 Part 4 | Test Report | 2018-08-09 | PDF 3.7 MB |
| Test Report UNII 1 Part 5 | Test Report | 2018-08-09 | PDF 4.9 MB |
| Test Report UNII 2 Part 1 | Test Report | 2018-08-09 | PDF 3.5 MB |
| Test Report UNII 2 Part 2 | Test Report | 2018-08-09 | PDF 3.9 MB |
| Test Report UNII 2 Part 3 | Test Report | 2018-08-09 | PDF 4.8 MB |
| Test Report UNII 2 Part 4 | Test Report | 2018-08-09 | PDF 5 MB |
| Test Report UNII 2 Part 5 | Test Report | 2018-08-09 | PDF 4.8 MB |
| Test Report UNII 2 Part 6 | Test Report | 2018-08-09 | PDF 5 MB |
| Test Report UNII 2 Part 7 | Test Report | 2018-08-09 | PDF 4.4 MB |
| Test Report UNII 2 Part 8 | Test Report | 2018-08-09 | PDF 2.9 MB |
| Part 90 Test Report | Test Report | 2015-12-20 | PDF 2.1 MB |
| Same Exhibit as Previous Application Metadata only | Test Report | 2015-12-20 | PDF 18.7 KB |
| Test Report | Test Report | 2015-12-20 | PDF 2.2 MB |
| Part 15C Test report | Test Report | 2013-08-28 | PDF 4 MB |
| Part 90Y Test report | Test Report | 2013-08-28 | PDF 4.3 MB |
| U-NII_Device_Security_Attestation | Cover Letter(s) | 2015-12-20 | PDF 81.4 KB |
| U-NII_Device_Security_Attestation_Supplement | Cover Letter(s) | 2015-12-20 | PDF 291.5 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-08-09 | PDF 110.3 KB |
| Long Term Confidentiality Request | Cover Letter(s) | 2018-08-09 | PDF 160.3 KB |
| Confidentiality Justification | Cover Letter(s) | 2015-12-20 | PDF 34.1 KB |
| Confidentiality Request | Cover Letter(s) | 2015-12-20 | PDF 30.2 KB |
| Antenna Data Sheet - AT201 | Cover Letter(s) | 2013-08-28 | PDF 595.2 KB |
| Antenna Data Sheet - AT202 | Cover Letter(s) | 2013-08-28 | PDF 387.2 KB |
| Antenna Data Sheet - AT203 | Cover Letter(s) | 2013-08-28 | PDF 2 MB |
| Antenna Data Sheet - AT206 | Cover Letter(s) | 2013-08-28 | PDF 2.5 MB |
| Antenna Data Sheet - AT207 | Cover Letter(s) | 2013-08-28 | PDF 2 MB |
| Antenna Datasheet AT201 | Cover Letter(s) | 2013-08-28 | PDF 595.2 KB |
| Antenna Datasheet AT202 | Cover Letter(s) | 2013-08-28 | PDF 387.2 KB |
| Antenna Datasheet AT203 | Cover Letter(s) | 2013-08-28 | PDF 2 MB |
| Antenna Datasheet AT206 | Cover Letter(s) | 2013-08-28 | PDF 2.5 MB |
| Antenna Datasheet AT207 | Cover Letter(s) | 2013-08-28 | PDF 2 MB |
| Confidentiality Request letter | Cover Letter(s) | 2013-08-28 | PDF 90.1 KB |
| Confidentiality request letter | Cover Letter(s) | 2013-08-28 | PDF 90.1 KB |
| MIMO Cover Letter | Cover Letter(s) | 2013-08-28 | PDF 79.8 KB |
| MIMO cover letter | Cover Letter(s) | 2013-08-28 | PDF 79.8 KB |
| Antenna Datasheet | RF Exposure Info | 2018-08-09 | PDF 110 KB |
| RF Exposure | RF Exposure Info | 2015-12-20 | PDF 230.8 KB |
| RF Exposure | RF Exposure Info | 2015-12-20 | PDF 315.5 KB |
| User Manual Metadata only | Users Manual | PDF 2.2 MB | |
| Theory of Operation Metadata only | Operational Description | PDF 727.8 KB | |
| U-NII_Device_Security_Attestation Metadata only | Operational Description | PDF 291.5 KB | |
| U-NII Device Security Attestation Supplement Metadata only | SDR Software/Security Inf | PDF 151 KB |
Application Information
| Application ID | nSTWNdMHNNE1tsg/L2tM5A== |
|---|---|
| Final Action Date | 2018-08-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004945812 |
| Model | RF-7800W-G2 |
| Frequency Range | 5170-5247.5 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Responsible Party | Thomas Camper, Jr., Regulatory Manager, tcamper@harris.com , (434)455-9367 |
| Technical Contact | Thomas D. Camper, Jr., Harris Corporation, tcamper@harris.com , 1-434-455-9367 |
| Test Firm | Greg Kovolenko, EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC, greg.kovolenko@metlabs.com  , 4108444071 |
| TCB Email | jenn.warnell@metlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power output listed is conducted aggregated power. The device supports 5MHz, 10MHz, 20MHz and 40MHz bandwidth. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter Device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nSTWNdMHNNE1tsg/L2tM5A== | 2018-08-09 | Class II permissive change or modification of presently authorized equipment |
| +lKavcaAJeOC4bn78yOLzQ== | 2015-12-20 | Original Equipment |
| +cQtKP4gUhsgTPMGOA9eeQ== | 2015-12-20 | Class II permissive change or modification of presently authorized equipment |
| P4T0L090YH379dYsMTFzuQ== | 2013-08-28 | Original Equipment |
| 3eLlPPuS7rnebusEaH6q/g== | 2013-08-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 4942.5-4987.5 MHz | 0.489 | 20.2ppm | 4M65W7D | 90Y | 44, MO |
| 4942.5-4987.5 MHz | 0.489 | 20.2ppm | 5M49W7D | 90Y | 41, 44, MO |
| 4945-4985 MHz | 0.31 | 20.2ppm | 9M25W7D | 90Y | 44, MO |
| 4945-4985 MHz | 0.31 | 20.2ppm | 9M17W7D | 90Y | 41, 44, MO |
| 4950-4980 MHz | 0.123 | 20.2ppm | 18M6W7D | 90Y | 44, MO |
| 4950-4980 MHz | 0.123 | 20.2ppm | 17M0W7D | 90Y | 41, 44, MO |
| 5170-5247.5 MHz | 0.521 | 15E | MO | ||
| 5252.5-5330 MHz | 0.176 | 15E | MO, ND | ||
| 5490-5700 MHz | 0.221 | 15E | MO, ND | ||
| 5727.5-5847.5 MHz | 0.18 | 4M72W7D | 15E | 38, 44, MO | |
| 5727.5-5847.5 MHz | 0.18 | 5M42W7D | 15C | 41, 44, MO | |
| 5730-5845 MHz | 0.18 | 9M45W7D | 15E | 38, 44, MO | |
| 5730-5845 MHz | 0.18 | 8M81W7D | 15C | 41, 44, MO | |
| 5735-5840 MHz | 0.18 | 18M7W7D | 15E | 38, 44, MO | |
| 5735-5840 MHz | 0.18 | 17M3W7D | 15C | 41, 44, MO | |
| 5745-5830 MHz | 0.18 | 37M6W7D | 15E | 38, 44, MO | |
| 5745-5830 MHz | 0.18 | 35M0W7D | 15C | 41, 44, MO |
Grants
TCB Grant - Application P4T0L090YH379dYsMTFzuQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/28/2013 Application Dated: 08/28/2013 |
| Harris Corporation RF Communications Division |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 41 44 MO | 90Y | 4942.5 - 4987.5 | 0.489 | 20.2 PM | 5M49W7D |
| 41 44 MO | 90Y | 4945.0 - 4985.0 | 0.31 | 20.2 PM | 9M17W7D |
| 41 44 MO | 90Y | 4950.0 - 4980.0 | 0.123 | 20.2 PM | 17M0W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 50 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 41: | Installation of this device must not be readily accessable to human subjects closer than 20 cm. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application P4T0L090YH379dYsMTFzuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 08/28/2013 Application Dated: 08/28/2013 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 41 44 MO | 90Y | 4942.5 - 4987.5 | 0.489 | 20.2 PM | 5M49W7D |
| 41 44 MO | 90Y | 4945.0 - 4985.0 | 0.31 | 20.2 PM | 9M17W7D |
| 41 44 MO | 90Y | 4950.0 - 4980.0 | 0.123 | 20.2 PM | 17M0W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 50 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 41: | Installation of this device must not be readily accessable to human subjects closer than 20 cm. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/09/2018 Application Dated: 06/27/2018 |
| Harris Corporation RF Communications Division |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5170.0 - 5247.5 | 0.521 | ||
| MO ND | 15E | 5252.5 - 5330.0 | 0.176 | ||
| MO ND | 15E | 5490.0 - 5700.0 | 0.221 |
| Power output listed is conducted aggregated power. The device supports 5MHz, 10MHz, 20MHz and 40MHz bandwidth. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter Device. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application nSTWNdMHNNE1tsg/L2tM5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 08/09/2018 Application Dated: 06/27/2018 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5170.0 - 5247.5 | 0.521 | ||
| MO ND | 15E | 5252.5 - 5330.0 | 0.176 | ||
| MO ND | 15E | 5490.0 - 5700.0 | 0.221 |
| Power output listed is conducted aggregated power. The device supports 5MHz, 10MHz, 20MHz and 40MHz bandwidth. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter Device. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 08/28/2013 Application Dated: 08/28/2013 |
| Harris Corporation RF Communications Division |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Digital Transmission System |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 41 44 MO | 15C | 5727.5 - 5847.5 | 0.18 | 5M42W7D | |
| 41 44 MO | 15C | 5730.0 - 5845.0 | 0.18 | 8M81W7D | |
| 41 44 MO | 15C | 5735.0 - 5840.0 | 0.18 | 17M3W7D | |
| 41 44 MO | 15C | 5745.0 - 5830.0 | 0.18 | 35M0W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 50 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 41: | Installation of this device must not be readily accessable to human subjects closer than 20 cm. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 3eLlPPuS7rnebusEaH6q/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 08/28/2013 Application Dated: 08/28/2013 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Digital Transmission System |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 41 44 MO | 15C | 5727.5 - 5847.5 | 0.18 | 5M42W7D | |
| 41 44 MO | 15C | 5730.0 - 5845.0 | 0.18 | 8M81W7D | |
| 41 44 MO | 15C | 5735.0 - 5840.0 | 0.18 | 17M3W7D | |
| 41 44 MO | 15C | 5745.0 - 5830.0 | 0.18 | 35M0W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 50 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 41: | Installation of this device must not be readily accessable to human subjects closer than 20 cm. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 12/20/2015 Application Dated: 12/17/2015 |
| Harris Corporation RF Communications Division |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 44 MO | 15E | 5727.5 - 5847.5 | 0.18 | 4M72W7D | |
| 38 44 MO | 15E | 5730.0 - 5845.0 | 0.18 | 9M45W7D | |
| 38 44 MO | 15E | 5735.0 - 5840.0 | 0.18 | 18M7W7D | |
| 38 44 MO | 15E | 5745.0 - 5830.0 | 0.18 | 37M6W7D |
| This Grant complies with the new rules for U-NII devices and Software changes. The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 60 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 80 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +lKavcaAJeOC4bn78yOLzQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 12/20/2015 Application Dated: 12/17/2015 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 44 MO | 15E | 5727.5 - 5847.5 | 0.18 | 4M72W7D | |
| 38 44 MO | 15E | 5730.0 - 5845.0 | 0.18 | 9M45W7D | |
| 38 44 MO | 15E | 5735.0 - 5840.0 | 0.18 | 18M7W7D | |
| 38 44 MO | 15E | 5745.0 - 5830.0 | 0.18 | 37M6W7D |
| This Grant complies with the new rules for U-NII devices and Software changes. The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 21 dBi or less, a distance of at least 60 cm if the gain of the antenna is 27.5 dBi or less, or a distance of at least 80 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 12/20/2015 Application Dated: 12/17/2015 |
| Harris Corporation RF Communications Division |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 44 MO | 90Y | 4942.5 - 4987.5 | 0.489 | 20.2 PM | 4M65W7D |
| 44 MO | 90Y | 4945.0 - 4985.0 | 0.31 | 20.2 PM | 9M25W7D |
| 44 MO | 90Y | 4950.0 - 4980.0 | 0.123 | 20.2 PM | 18M6W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 8 dBi or less, a distance of at least 30 cm if the gain of the antenna is 13.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 21 dBi or less, or a distance of at least 120 cm if the gain of the antenna is 26 dBi or less, or a distance of at least 170 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +cQtKP4gUhsgTPMGOA9eeQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 12/20/2015 Application Dated: 12/17/2015 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AQZ-RF-7800W-G2 |
| Name of Grantee: | Harris Corporation RF Communications Division |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | For use in fixed and nomadic infrastructure for Ethernet data backhaul. |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 44 MO | 90Y | 4942.5 - 4987.5 | 0.489 | 20.2 PM | 4M65W7D |
| 44 MO | 90Y | 4945.0 - 4985.0 | 0.31 | 20.2 PM | 9M25W7D |
| 44 MO | 90Y | 4950.0 - 4980.0 | 0.123 | 20.2 PM | 18M6W7D |
| The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Any changes would require a Class One or Class Two Permissive Change. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 8 dBi or less, a distance of at least 30 cm if the gain of the antenna is 13.5 dBi or less, or a distance of at least 60 cm if the gain of the antenna is 21 dBi or less, or a distance of at least 120 cm if the gain of the antenna is 26 dBi or less, or a distance of at least 170 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 44: | Unit must be installed so that users cannot approach the radiating element of this transmitter no closer than 24 inches. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |