FCC ID ARA-CPE8KPRO3XA

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 05/21/2020 Application Dated: 05/18/2020

Telrad Networks Ltd

Industrial Center

PO Box 6118

Lod, 711600 Israel

Attention: Yishai Amsterdamer , VP R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ARA-CPE8KPRO3XA
Name of Grantee:	Telrad Networks Ltd
Equipment Class:	Citizens Band Category A and B Devices
Notes:	LTE Outdoor CBRS and CPE

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
40 EP	96	3555.0  -  3695.0	6.4	0.0033  %	9M20G7D
40 EP	96	3560.0  -  3690.0	6.3	0.0033  %	18M0G7D
40 EP	96	3555.0  -  3695.0	5.9	0.0033  %	9M47W7D
40 EP	96	3560.0  -  3690.0	5.9	0.0033  %	18M2W7D

Power Output is total EIRP per BW. This device is a Category B CBSD that must be professionally installed and is limited to outdoor operations. This device is capable of 1x2 MIMO configurations as shown in the filing. This transmitter is approved for fixed operation with respect to RF exposure and must be installed to provide a minimum separation distance of 23 cm from all persons. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating for complying with FCC multi-transmitter product procedures and RF exposure compliance. This devices supports 10 and 20 MHz bandwidth modes for LTE band 48.

40:	This device may be operated as a CBSD-CPE subject to configuration and control protocols as specified in the filing.
EP:	Output power is Effective Isotropic Radiated Power (EIRP)

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Telrad Networks Ltd Industrial Center PO Box 6118 Lod, 711600 Israel

Date of Grant: 05/21/2020 Application Dated: 05/18/2020

Attention: Yishai Amsterdamer , VP R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ARA-CPE8KPRO3XA
Name of Grantee:	Telrad Networks Ltd
Equipment Class:	Citizens Band Category A and B Devices
Notes:	LTE Outdoor CBRS and CPE
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
40 EP	96	3555.0  -  3695.0	6.4	0.0033  %	9M20G7D
40 EP	96	3560.0  -  3690.0	6.3	0.0033  %	18M0G7D
40 EP	96	3555.0  -  3695.0	5.9	0.0033  %	9M47W7D
40 EP	96	3560.0  -  3690.0	5.9	0.0033  %	18M2W7D

Power Output is total EIRP per BW. This device is a Category B CBSD that must be professionally installed and is limited to outdoor operations. This device is capable of 1x2 MIMO configurations as shown in the filing. This transmitter is approved for fixed operation with respect to RF exposure and must be installed to provide a minimum separation distance of 23 cm from all persons. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating for complying with FCC multi-transmitter product procedures and RF exposure compliance. This devices supports 10 and 20 MHz bandwidth modes for LTE band 48.

40:	This device may be operated as a CBSD-CPE subject to configuration and control protocols as specified in the filing.
EP:	Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application hOaFlbGJ65D5liJIf1+icg==

EAS Grant - Application hOaFlbGJ65D5liJIf1+icg==

TCB Grant - Application 4r/xIm04vLpCDbj3r15KYg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 08/02/2016 Application Dated: 08/01/2016

Telrad Networks Ltd

Industrial Center

PO Box 6118

Lod, 711600 Israel

Attention: Yishai Amsterdamer , VP R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ARA-CPE8KPRO3XA
Name of Grantee:	Telrad Networks Ltd
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	CPE8000-PRO-1D-3.X

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
UR	90	3652.5  -  3697.5	3.47	1.08  PM	3M60W7D
UR	90	3655.0  -  3695.0	7.24	1.08  PM	8M60W7D
UR	90	3657.5  -  3692.5	7.76	1.08  PM	12M9W7D
UR	90	3660.0  -  3690.0	7.41	1.08  PM	17M2W7D

Output power listed is EIRP. Professional installation required. This transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 50-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 43. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

UR:	This device incorporates an unrestricted contention based protocol. It is capable of avoiding co frequency interference with devices using all other types of contention-based protocols.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Telrad Networks Ltd Industrial Center PO Box 6118 Lod, 711600 Israel

Date of Grant: 08/02/2016 Application Dated: 08/01/2016

Attention: Yishai Amsterdamer , VP R&D

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ARA-CPE8KPRO3XA
Name of Grantee:	Telrad Networks Ltd
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	CPE8000-PRO-1D-3.X
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
UR	90	3652.5  -  3697.5	3.47	1.08  PM	3M60W7D
UR	90	3655.0  -  3695.0	7.24	1.08  PM	8M60W7D
UR	90	3657.5  -  3692.5	7.76	1.08  PM	12M9W7D
UR	90	3660.0  -  3690.0	7.41	1.08  PM	17M2W7D

Output power listed is EIRP. Professional installation required. This transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 50-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 43. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

UR:	This device incorporates an unrestricted contention based protocol. It is capable of avoiding co frequency interference with devices using all other types of contention-based protocols.

Mail To: