FCC ID ARW-LOCLITEG4

ARWLOCLITEG4, ARW LOCLITEG4, ARW-L0CLITEG4, ARW-LOCLITEG4, ARW-LOCL1TEG4

Locata Corporation Pty Ltd LocataLite G4 LOCLITEG4

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: ARW-LOCLITEG4 is ARW. The remaining characters of the FCC ID, -LOCLITEG4, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: LocataLite G4

Application: LocataLite G4
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/ARW-LOCLITEG4
Sources: FCC.gov | FCC.report
Registered By: Locata Corporation Pty Ltd - ARW (Australia)

App #	Purpose	Date	Unique ID
1	Original Equipment	2014-06-02	EDh76PgX55li+7HQlgai/A==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
2.411-2.473 GHz	259 mW	15C	1

Exhibits

Document	Type	Submitted Available
User Manual	Users Manual Adobe Acrobat PDF (1497 kB)	2014-06-02 2014-06-02
Test Setup Photos	Test Setup Photos Adobe Acrobat PDF (348 kB)	2014-06-02 2014-06-02
Test Report	Test Report Adobe Acrobat PDF (3470 kB)	2014-06-02 2014-06-02
RF Exposure	RF Exposure Info Adobe Acrobat PDF (213 kB)	2014-06-02 2014-06-02
Internal Photos	Internal Photos Adobe Acrobat PDF (769 kB)	2014-06-02 2014-06-02
ID Label	ID Label/Location Info Adobe Acrobat PDF (603 kB)	2014-06-02 2014-06-02
External Photos	External Photos Adobe Acrobat PDF (440 kB)	2014-06-02 2014-06-02
Request for confidentiality	Cover Letter(s) Adobe Acrobat PDF (34 kB)	2014-06-02 2014-06-02
Cover Letters_Mike Skeen	Cover Letter(s) Adobe Acrobat PDF (59 kB)	2014-06-02 2014-06-02
Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (74 kB)	2014-06-02 2014-06-02
Cover Letter_Modular	Cover Letter(s) Adobe Acrobat PDF (21 kB)	2014-06-02 2014-06-02
Schematics_ASY_010202-4	Schematics Adobe Acrobat PDF (661 kB)	2014-06-02
BOM_ASY-010201-5-00	Parts List/Tune Up Info Adobe Acrobat PDF (110 kB)	2014-06-02
BOM_ASY-010203-3-00	Parts List/Tune Up Info Adobe Acrobat PDF (86 kB)	2014-06-02
Antenna AT2400-2	Operational Description Adobe Acrobat PDF (207 kB)	2014-06-02
Schematics_ASY-010102-6	Schematics Adobe Acrobat PDF (484 kB)	2014-06-02
Block Diagram	Block Diagram Adobe Acrobat PDF (493 kB)	2014-06-02
Schematics_ASY-010106-1_Part2	Schematics Adobe Acrobat PDF (5819 kB)	2014-06-02
Schematics_ASY_010201-5	Schematics Adobe Acrobat PDF (1436 kB)	2014-06-02
BOM_ASY-010106-1-00	Parts List/Tune Up Info Adobe Acrobat PDF (68 kB)	2014-06-02
Operational Description	Operational Description Adobe Acrobat PDF (54 kB)	2014-06-02
BOM_ASY-010202-4-00	Parts List/Tune Up Info Adobe Acrobat PDF (108 kB)	2014-06-02
Schematics_ASY-010106-1_Part1	Schematics Adobe Acrobat PDF (5984 kB)	2014-06-02
Schematics_ASY-010203-3	Schematics Adobe Acrobat PDF (291 kB)	2014-06-02
BOM_ASY-010102-6-00	Parts List/Tune Up Info Adobe Acrobat PDF (60 kB)	2014-06-02

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Locata Corporation Pty Ltd
FCC Registration Number (FRN):	0021512298
Alphanumeric FCC ID:	ARWLOCLITEG4
Unique Application Identifier:	EDh76PgX55li+7HQlgai/A==
Line one:	111 Canberra Avenue
City:	Griffith ACT
Country:	Australia
Zip Code:	2603

TCB Information

TCB Application Email Address:	LST.FRE.CertNotice@ul.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	ARW
Product Code:	-LOCLITEG4

Person at the applicant's address to receive grant or for contact

Name:	Michael Skeen
Title:	Production Managaer

Telephone Number:

+61 2 6126 5700

Extension:

Fax Number:	+61 2 6126 5704
Email:	mike.skeen@locatacorp.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	LocataLite G4

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Austest Laboratories

First Name: Colin

Last Name: Gan

Telephone Number:

61882887400

Extension:

Fax Number: 61-8-8288 7411

E-mail: colin@austest.com.au

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular approval. This device has two antenna ports, each connected to two separate transmitters. Output power listed is the aggregate conducted power across both antenna ports. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Michael Skeen

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538

Date of Grant: 06/02/2014

Application Dated: 06/02/2014

Locata Corporation Pty Ltd

111 Canberra Avenue

Griffith ACT, 2603
Australia

Attention: Michael Skeen , Production Managaer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ARW-LOCLITEG4

Name of Grantee:	Locata Corporation Pty Ltd

Equipment Class:	Digital Transmission System
Notes:	LocataLite G4
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2411.0 - 2473.0	0.259

Modular approval. This device has two antenna ports, each connected to two separate transmitters. Output power listed is the aggregate conducted power across both antenna ports. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Locata Corporation Pty Ltd
111 Canberra Avenue P.O. Box ,
Griffith ACT, 2603
Australia