FCC ID AU792U07A31817

GSM/SPRS Modem Module

by Multi Tech Systems Inc

Grantee Code: AU7   Product Code: 92U07A31817
Latest application date: 2011-01-18

FCC ID Device Details

FCC IDAU792U07A31817
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAU7
Product Code92U07A31817
Applicant BusinessMulti Tech Systems Inc 🇺🇸
Related Domains multitech.com
Equipment ClassGSM/SPRS Modem Module
Test FirmMicom Labs

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2011-01-18
824.2-848.8 MHzOriginal Equipment2007-05-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2007-05-09PDF 986.4 KB
Internal Photos MTCBA G F4Internal Photos2007-05-09PDF 125.2 KB
Internal Photos MTCBA G UF4Internal Photos2007-05-09PDF 119.3 KB
Internal Photos MTMMC G F4Internal Photos2007-05-09PDF 136.3 KB
Internal Photos MTSMC G F4Internal Photos2007-05-09PDF 136.3 KB
Internal Photos Wavecom Q24Internal Photos2007-05-09PDF 94.4 KB
External Photos MTCBA G F4External Photos2007-05-09PDF 130.2 KB
External Photos MTCBA G UF4External Photos2007-05-09PDF 102.4 KB
External Photos MTMMC G F4External Photos2007-05-09PDF 129.4 KB
External Photos MTSMC G F4External Photos2007-05-09PDF 136.3 KB
ID Label and Location Info MTCBA G F4ID Label/Location Info2007-05-09PDF 97.1 KB
ID Label and Location Info MTCBA G UF4ID Label/Location Info2007-05-09PDF 60.5 KB
ID Label and Location Info MTMMC G F4ID Label/Location Info2007-05-09PDF 122.5 KB
ID Label and Location Info MTSMC G F4ID Label/Location Info2007-05-09PDF 57.6 KB
Test Setup PhotographsTest Setup Photos2011-01-18PDF 3.8 MB
Test Setup Photos MTCBA G UF4 and MTCBA G F4Test Setup Photos2007-05-09PDF 929.9 KB
Test Setup Photos MTSMC and MTMMCTest Setup Photos2007-05-09PDF 1.2 MB
Test ReportTest Report2011-01-18PDF 5 MB
Conducted Report WavecomTest Report2007-05-09PDF 861.7 KB
Test Report for MTCBA G UF4 and MTCBA G F4Test Report2007-05-09PDF 544.1 KB
Test Report for MTSMC and MTMMCTest Report2007-05-09PDF 463.8 KB
Class II PC RequestCover Letter(s)2011-01-18PDF 515.9 KB
Letter of AuthorizationCover Letter(s)2011-01-18PDF 651.9 KB
Confidentiality Request LetterCover Letter(s)2007-05-09PDF 36.7 KB
RF Exposure Info MTCBA G F4RF Exposure Info2007-05-09PDF 47.9 KB
RF Exposure Info MTMMCRF Exposure Info2007-05-09PDF 47.9 KB
RF Exposure Info Wavecom Q24RF Exposure Info2007-05-09PDF 53 KB

Application Information

Application IDjxOl9seU8/ToAPEh6YCFsA==
Final Action Date2011-01-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009336579
Model92U07A31817
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM/SPRS Modem Module
Responsible PartyTracey Dickinson, tdickinson@multitech.com , 763-717-5525
Test FirmGordon Hurst, Micom Labs, gordon_hurst@micomlabs.com , 925-462-0304
TCB Emailclinton_bradley@micomlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsModular Transmitter. Output power listed is conducted; highest radiated power measured in specific products shown in filing is Part 22 1.33 W ERP, Part 24 1.17 W EIRP. The antenna gain, including cable loss, must not exceed 3 dBi at 1900 MHz / 1.4 dBi at 850 MHz for mobile operating configurations and 7 dBi at 1900 MHz / 1.4 dBi at 850 MHz for fixed mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except as noted in this grant. End-users and installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. Class II Change: This Class II Change is to address co-location of this device in the Navicomm series of metering devices (host) with Wireless Transceiver Module FCC ID: YQVHHH002.

Applications

Application IDDatePurpose
jxOl9seU8/ToAPEh6YCFsA==2011-01-18Class II permissive change or modification of presently authorized equipment
SMb8n5Fpoun/ckJqqzmMmQ==2007-05-09Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.5140.0424ppm300KGXW22H
1850.2-1909.8 MHz0.9780.0282ppm300KGXW24E

Grants

TCB Grant - Application SMb8n5Fpoun/ckJqqzmMmQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 05/09/2007

Application Dated: 05/09/2007
Multi Tech Systems Inc
2205 Woodale Drive
Mounds View, MN 55112
 
Attention: Tracey Dickinson

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AU792U07A31817
Name of Grantee:  Multi Tech Systems Inc
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.978 0.0282  PM 300KGXW
22H 824.2  -  848.8 1.514 0.0424  PM 300KGXW

Modular Transmitter.

Output power listed is conducted; highest radiated power measured in specific products shown in filing is Part 22 1.33 W ERP, Part 24 1.17 W EIRP.

The antenna gain, including cable loss, must not exceed 3 dBi at 1900 MHz / 1.4 dBi at 850 MHz for mobile operating configurations and 7 dBi at 1900 MHz / 1.4 dBi at 850 MHz for fixed mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

End-users and installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.


EAS Grant - Application SMb8n5Fpoun/ckJqqzmMmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Multi Tech Systems Inc
2205 Woodale Drive
Mounds View, MN 55112
United States
  Date of Grant: 05/09/2007

Application Dated: 05/09/2007
 
Attention: Tracey Dickinson

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AU792U07A31817
Name of Grantee:  Multi Tech Systems Inc
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.978 0.0282  PM 300KGXW
22H 824.2  -  848.8 1.514 0.0424  PM 300KGXW

Modular Transmitter.

Output power listed is conducted; highest radiated power measured in specific products shown in filing is Part 22 1.33 W ERP, Part 24 1.17 W EIRP.

The antenna gain, including cable loss, must not exceed 3 dBi at 1900 MHz / 1.4 dBi at 850 MHz for mobile operating configurations and 7 dBi at 1900 MHz / 1.4 dBi at 850 MHz for fixed mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

End-users and installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



Mail To:


EA872278

TCB Grant - Application jxOl9seU8/ToAPEh6YCFsA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/18/2011

Application Dated: 01/18/2011
Multi Tech Systems Inc
2205 Woodale Drive
Mounds View, MN 55112
 
Attention: Tracey Dickinson

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AU792U07A31817
Name of Grantee:  Multi Tech Systems Inc
Equipment Class: PCS Licensed Transmitter
Notes: GSM/SPRS Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.978 0.0282  PM 300KGXW
22H 824.2  -  848.8 1.514 0.0424  PM 300KGXW

Modular Transmitter. Output power listed is conducted; highest radiated power measured in specific products shown in filing is Part 22 1.33 W ERP, Part 24 1.17 W EIRP.

The antenna gain, including cable loss, must not exceed 3 dBi at 1900 MHz / 1.4 dBi at 850 MHz for mobile operating configurations and 7 dBi at 1900 MHz / 1.4 dBi at 850 MHz for fixed mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except as noted in this grant.

End-users and installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Class II Change: This Class II Change is to address co-location of this device in the Navicomm series of metering devices (host) with Wireless Transceiver Module FCC ID: YQVHHH002.


EAS Grant - Application jxOl9seU8/ToAPEh6YCFsA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Multi Tech Systems Inc
2205 Woodale Drive
Mounds View, MN 55112
United States
  Date of Grant: 01/18/2011

Application Dated: 01/18/2011
 
Attention: Tracey Dickinson

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AU792U07A31817
Name of Grantee:  Multi Tech Systems Inc
Equipment Class: PCS Licensed Transmitter
Notes: GSM/SPRS Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.2  -  1909.8 0.978 0.0282  PM 300KGXW
22H 824.2  -  848.8 1.514 0.0424  PM 300KGXW

Modular Transmitter. Output power listed is conducted; highest radiated power measured in specific products shown in filing is Part 22 1.33 W ERP, Part 24 1.17 W EIRP.

The antenna gain, including cable loss, must not exceed 3 dBi at 1900 MHz / 1.4 dBi at 850 MHz for mobile operating configurations and 7 dBi at 1900 MHz / 1.4 dBi at 850 MHz for fixed mounted operations, as defined in 2.1091 and 1.1307 of the rules for satisfying RF exposure compliance.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except as noted in this grant.

End-users and installers must be provided with antenna installation instructions and transmitter operation conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Class II Change: This Class II Change is to address co-location of this device in the Navicomm series of metering devices (host) with Wireless Transceiver Module FCC ID: YQVHHH002.



Mail To: