FCC ID AUBWFSMM
Wireless Monitor Module
by Honeywell International Inc.
Grantee Code: AUB Product Code: WFSMM
Latest application date: 2017-08-30
FCC ID Device Details
| FCC ID | AUBWFSMM |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AUB |
| Product Code | WFSMM |
| Applicant Business | Honeywell International Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | Wireless Monitor Module |
| Test Firm | Ademco Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903.55-926.45 MHz | Class II permissive change or modification of presently authorized equipment | 2017-08-30 |
| 902.875-927.125 MHz | Class II permissive change or modification of presently authorized equipment | 2017-08-30 |
| 902.875-927.125 MHz | Original Equipment | 2014-01-02 |
| 903.55-926.45 MHz | Original Equipment | 2014-01-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Exhibit D Users Manual per 2 1033 b3 | Users Manual | 2014-06-25 | PDF 3.3 MB |
| Exhibit C Internal Photographs per 2 1033 b7 | Internal Photos | 2014-06-25 | PDF 218.4 KB |
| Exhibit C External Photographs per 2 1033 b7 | External Photos | 2014-06-25 | PDF 49.8 KB |
| Exhibit A ID Label and location per 2 1033 b7 | ID Label/Location Info | 2014-01-02 | PDF 67.4 KB |
| Exhibit C RE Test Setup photographs | Test Setup Photos | 2014-06-25 | PDF 1.2 MB |
| Exhibit E Test Measurement Report per 2 1033 b6 | Test Report | 2017-08-30 | PDF 3.1 MB |
| Exhibit E Test Measurement Report per 2 1033 b6 PART 2 | Test Report | 2017-08-30 | PDF 3 MB |
| Exhibit E Test Measurement Report per 2 1033 b6 part 3 | Test Report | 2017-08-30 | PDF 1.8 MB |
| Exhibit E Test Measurement Report per 2 1033 b6 | Test Report | 2014-01-02 | PDF 4.5 MB |
| Cover Letter Requesting Class II Permissive Change | Cover Letter(s) | 2017-08-30 | PDF 28.3 KB |
| Cover Letter Requesting Confidentiality | Cover Letter(s) | 2014-01-02 | PDF 29.9 KB |
Application Information
| Application ID | RLDmF4Yp1lIZR7xp6uPMyw== |
|---|---|
| Final Action Date | 2017-08-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021453741 |
| Model | WFSMM |
| Frequency Range | 903.55-926.45 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Monitor Module |
| Responsible Party | Karl Linford, Sr Director of Engineering, karl.linford@honeywell.com |
| Technical Contact | Jonathan Potter, Honeywell International Inc., jonathan.potter@honeywell.com |
| Non-Technical Contact | Jonathan Potter, Honeywell International Inc., jonathan.potter@honeywell.com |
| Test Firm | Michael Antola, Ademco Inc., michael.antola@resideo.com |
| TCB Email | reking@elitetest.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RLDmF4Yp1lIZR7xp6uPMyw== | 2017-08-30 | Class II permissive change or modification of presently authorized equipment |
| R6zQQNFZFLAlO9pjEeKtMA== | 2017-08-30 | Class II permissive change or modification of presently authorized equipment |
| xZ2+YLtACles0+XF4pQtsw== | 2014-01-02 | Original Equipment |
| EAhYO+7z80Q96YJo2hvwDQ== | 2014-01-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xZ2+YLtACles0+XF4pQtsw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 01/02/2014 Application Dated: 01/02/2014 |
| Honeywell International Inc. |
| Honeywell International Inc. |
| 3825 Ohio Ave |
| St. Charles, IL 60174 |
| Attention: Brian Langkan , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Monitor Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.875 - 927.125 | 0.016 |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xZ2+YLtACles0+XF4pQtsw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. Honeywell International Inc. 3825 Ohio Ave St. Charles, IL 60174 United States |
Date of Grant: 01/02/2014 Application Dated: 01/02/2014 |
| Attention: Brian Langkan , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Monitor Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.875 - 927.125 | 0.016 |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/30/2017 Application Dated: 08/30/2017 |
| Honeywell International Inc. |
| Honeywell International Inc. |
| 3825 Ohio Ave |
| St. Charles, IL 60174 |
| Attention: Karl Linford , Sr Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Monitor Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.55 - 926.45 | 0.05 | 15.0 PM |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application RLDmF4Yp1lIZR7xp6uPMyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. Honeywell International Inc. 3825 Ohio Ave St. Charles, IL 60174 United States |
Date of Grant: 08/30/2017 Application Dated: 08/30/2017 |
| Attention: Karl Linford , Sr Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Monitor Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.55 - 926.45 | 0.05 | 15.0 PM |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/30/2017 Application Dated: 08/30/2017 |
| Honeywell International Inc. |
| Honeywell International Inc. |
| 3825 Ohio Ave |
| St. Charles, IL 60174 |
| Attention: Karl Linford , Sr Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Monitor Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.875 - 927.125 | 0.0158 | 15.0 PM |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application R6zQQNFZFLAlO9pjEeKtMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. Honeywell International Inc. 3825 Ohio Ave St. Charles, IL 60174 United States |
Date of Grant: 08/30/2017 Application Dated: 08/30/2017 |
| Attention: Karl Linford , Sr Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Monitor Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.875 - 927.125 | 0.0158 | 15.0 PM |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 01/02/2014 Application Dated: 01/02/2014 |
| Honeywell International Inc. |
| Honeywell International Inc. |
| 3825 Ohio Ave |
| St. Charles, IL 60174 |
| Attention: Brian Langkan , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Monitor Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.55 - 926.45 | 0.05 |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application EAhYO+7z80Q96YJo2hvwDQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Honeywell International Inc. Honeywell International Inc. 3825 Ohio Ave St. Charles, IL 60174 United States |
Date of Grant: 01/02/2014 Application Dated: 01/02/2014 |
| Attention: Brian Langkan , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AUBWFSMM |
| Name of Grantee: | Honeywell International Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Monitor Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.55 - 926.45 | 0.05 |
| Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |