FCC ID AUBWFSPS

Wireless Pull Station

by Honeywell International Inc.

Grantee Code: AUB   Product Code: WFSPS
Latest application date: 2020-04-23

FCC ID Device Details

FCC IDAUBWFSPS
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAUB
Product CodeWFSPS
Applicant BusinessHoneywell International Inc. 🇺🇸
Related Domains honeywell.com
Equipment ClassWireless Pull Station
Test FirmHoneywell Technology Solutions Lab Pvt Ltd-Bangalo

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903.55-926.45 MHzClass II permissive change or modification of presently authorized equipment2020-04-23
902.875-927.125 MHzClass II permissive change or modification of presently authorized equipment2020-04-23
903.55-926.45 MHzOriginal Equipment2018-03-02
902.875-927.125 MHzOriginal Equipment2018-03-02

Exhibits

DocumentTypeAvailableFile
Exhibit D Users Manual per 2 1033 b3Users Manual2018-08-01PDF 4.4 MB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2018-08-01PDF 184 KB
Exhibit C External Photographs per 2 1033 b7External Photos2018-08-01PDF 96.2 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2018-03-02PDF 76.2 KB
Exhibit C RE Test Setup photographsTest Setup Photos2018-08-01PDF 1.2 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2020-04-23PDF 2.9 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2018-03-02PDF 3.4 MB
Cover Letter Detailing the reason for the filing.Cover Letter(s)2020-04-23PDF 47.2 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2020-04-23PDF 133.1 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2020-04-23PDF 132.9 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2018-03-02PDF 68.4 KB
Exhibit B Block Diagram per 2 1033 b5 Metadata onlyBlock DiagramPDF 10.7 KB
Exhibit B Schematics per 2 1033 b5 Metadata onlySchematicsPDF 648.3 KB
Exhibit B Operational Description per 2 1033 b4 Metadata onlyOperational DescriptionPDF 359.3 KB
Misc Parts List Exhibits Metadata onlyParts List/Tune Up InfoPDF 673.4 KB

Application Information

Application IDMs1SPVe6E63uRCfJTIUeLA==
Final Action Date2020-04-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021453741
ModelWFSPS
Frequency Range903.55-926.45 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWireless Pull Station
Responsible PartyKarl Linford, Sr Director of Engineering, karl.linford@honeywell.com , 516-577-5801
Technical ContactEd Kurtz, Honeywell International, Inc., ed.kurtz@honeywell.com , 6307625255
Non-Technical ContactPardeep Verma, Honeywell International, Inc., pardeep.verma@honeywell.com , 6307625401
Test FirmKeerti Kamesh, Honeywell Technology Solutions Lab Pvt Ltd-Bangalo, keerti.kamesh@honeywell.com , +91 9686568630
TCB Emailreking@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change.

Applications

Application IDDatePurpose
Ms1SPVe6E63uRCfJTIUeLA==2020-04-23Class II permissive change or modification of presently authorized equipment
5hvnpE8CSwvhFqQvDBQFEg==2020-04-23Class II permissive change or modification of presently authorized equipment
YXJSDdowYFIMwePHxzZm9Q==2018-03-02Original Equipment
Hurd4Hqa12RKNJjkJcu3wQ==2018-03-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.875-927.125 MHz0.015800015CCC
903.55-926.45 MHz0.050000015CCC

Grants

TCB Grant - Application YXJSDdowYFIMwePHxzZm9Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 03/02/2018

Application Dated: 03/02/2018
Honeywell International Inc.
Honeywell International Inc.
3825 Ohio Ave
St. Charles, IL 60174
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Pull Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YXJSDdowYFIMwePHxzZm9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell International Inc. 3825 Ohio Ave
St. Charles, IL 60174
United States
  Date of Grant: 03/02/2018

Application Dated: 03/02/2018
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Pull Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Ms1SPVe6E63uRCfJTIUeLA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 04/23/2020

Application Dated: 04/23/2020
Honeywell International Inc.
Honeywell International Inc.
3825 Ohio Ave
St. Charles, IL 60174
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Pull Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Ms1SPVe6E63uRCfJTIUeLA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell International Inc. 3825 Ohio Ave
St. Charles, IL 60174
United States
  Date of Grant: 04/23/2020

Application Dated: 04/23/2020
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Pull Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.55  -  926.45 0.05  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Hurd4Hqa12RKNJjkJcu3wQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 03/02/2018

Application Dated: 03/02/2018
Honeywell International Inc.
Honeywell International Inc.
3825 Ohio Ave
St. Charles, IL 60174
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Pull Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.0158  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Hurd4Hqa12RKNJjkJcu3wQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell International Inc. 3825 Ohio Ave
St. Charles, IL 60174
United States
  Date of Grant: 03/02/2018

Application Dated: 03/02/2018
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Pull Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.0158  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5hvnpE8CSwvhFqQvDBQFEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 04/23/2020

Application Dated: 04/23/2020
Honeywell International Inc.
Honeywell International Inc.
3825 Ohio Ave
St. Charles, IL 60174
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Pull Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.0158  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5hvnpE8CSwvhFqQvDBQFEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Honeywell International Inc.
Honeywell International Inc. 3825 Ohio Ave
St. Charles, IL 60174
United States
  Date of Grant: 04/23/2020

Application Dated: 04/23/2020
 
Attention: Karl Linford , Sr Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AUBWFSPS
Name of Grantee:  Honeywell International Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Pull Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.875  -  927.125 0.0158  

Power output listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: