FCC ID AZ489FT3829
2-Way Portable Radio with Bluetooth
by Motorola Solutions, Inc.
Grantee Code: AZ4 Product Code: 89FT3829
Latest application date: 2017-03-31
Device Images
FCC ID Device Details
| FCC ID | AZ489FT3829 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AZ4 |
| Product Code | 89FT3829 |
| Applicant Business | Motorola Solutions, Inc. 🇺🇸 |
| Related Domains |  motorolasolutions.com |
| Equipment Class | 2-Way Portable Radio with Bluetooth |
| Test Firm | Motorola Solutions Malaysia Sdn Bhd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 136-174 MHz | Class II permissive change or modification of presently authorized equipment | 2017-03-31 |
| 136-174 MHz | Class II permissive change or modification of presently authorized equipment | 2015-02-25 |
| 136-174 MHz | Class II permissive change or modification of presently authorized equipment | 2014-02-24 |
| 136-174 MHz | Class II permissive change or modification of presently authorized equipment | 2014-02-20 |
| 2402-2480 MHz | Original Equipment | 2010-12-15 |
| 136-174 MHz | Original Equipment | 2010-12-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-02-25 | PDF 4.8 MB |
| Ex 8 Front Panel Programming Instructions Draft | Users Manual | 2014-02-20 | PDF 71 KB |
| Ex8a Amended User Manual | Users Manual | 2010-12-15 | PDF 1.3 MB |
| Ex8a RF Safety Booklet | Users Manual | 2010-12-15 | PDF 2.3 MB |
| Ex8a Users Manual Amended | Users Manual | 2010-12-15 | PDF 1.3 MB |
| Ex8a Users Manual Final | Users Manual | 2010-12-15 | PDF 1.3 MB |
| Ex8b RF Safety Booklet | Users Manual | 2010-12-15 | PDF 2.3 MB |
| Ex9 Internal Photos | Internal Photos | 2010-12-15 | PDF 1.3 MB |
| External Photos | External Photos | 2015-02-25 | PDF 306.2 KB |
| Ex3 External Photos | External Photos | 2010-12-15 | PDF 239.3 KB |
| Ex1 FCC ID Label | ID Label/Location Info | 2010-12-15 | PDF 52.4 KB |
| Test Setup Photos | Test Setup Photos | 2017-03-31 | PDF 284.4 KB |
| Test Setup Procedure Report | Test Report | 2014-02-24 | PDF 68.1 KB |
| Ex7 Test Set Up Procedures | Test Setup Photos | 2010-12-15 | PDF 67.7 KB |
| Ex7 Test Setup Procedures | Test Setup Photos | 2010-12-15 | PDF 67.7 KB |
| Ex7B RFx Test Setup Photos | RF Exposure Info | 2010-12-15 | PDF 1.2 MB |
| Ex7c Blue Tooth Test Set Up Photos | Test Setup Photos | 2010-12-15 | PDF 1.6 MB |
| Test Report | Test Report | 2017-03-31 | PDF 1.9 MB |
| Test Report | Test Report | 2014-02-24 | PDF 677.5 KB |
| Ex6 Blue Tooth Test Report | Test Report | 2010-12-15 | PDF 1.6 MB |
| Ex6 Test Report | Test Report | 2010-12-15 | PDF 1.5 MB |
| Attestation Statement | Attestation Statements | 2015-02-25 | PDF 11.5 KB |
| Ex2 Attestation Statement | Attestation Statements | 2010-12-15 | PDF 19.2 KB |
| Confidentiality Request | Cover Letter(s) | 2017-03-31 | PDF 18.9 KB |
| FCC Cover Letter | Cover Letter(s) | 2017-03-31 | PDF 53.9 KB |
| Frequency Justification Letter | Cover Letter(s) | 2017-03-31 | PDF 26.3 KB |
| Cover Letter | Cover Letter(s) | 2015-02-25 | PDF 84.1 KB |
| Justification Letter | Cover Letter(s) | 2015-02-25 | PDF 83.1 KB |
| Class II Change Letter | Cover Letter(s) | 2014-02-24 | PDF 16.3 KB |
| Confidential Letter | Cover Letter(s) | 2014-02-24 | PDF 20.1 KB |
| Frequency Justification Letter | Cover Letter(s) | 2014-02-24 | PDF 20.9 KB |
| Statement of Certification | Cover Letter(s) | 2014-02-24 | PDF 11.1 KB |
| Ex 13 Cover Letter | Cover Letter(s) | 2014-02-20 | PDF 64.9 KB |
| Ex 13 b Confidentiality Request - VOID, withdrawn, INFO ONLY, not applicable | Cover Letter(s) | 2014-02-20 | PDF 17.5 KB |
| FT3829 Resp_to_FCC_EA449420 140127 | Cover Letter(s) | 2014-02-20 | PDF 16.8 KB |
| Respone to Corrs 43401 | Cover Letter(s) | 2014-02-20 | PDF 25.7 KB |
| Response to Corres 43846 | Cover Letter(s) | 2014-02-20 | PDF 27.9 KB |
| Response to Correspondence 45364 | Cover Letter(s) | 2014-02-20 | PDF 249.2 KB |
| Response to Corrs 45165 | Cover Letter(s) | 2014-02-20 | PDF 28.3 KB |
| Ex13a Cover Letter | Cover Letter(s) | 2010-12-15 | PDF 27.6 KB |
| Ex13a Cover Letter Amended | Cover Letter(s) | 2010-12-15 | PDF 27.6 KB |
| Ex13b Confid Request | Cover Letter(s) | 2010-12-15 | PDF 28.6 KB |
| Ex13b Confidentiality Request | Cover Letter(s) | 2010-12-15 | PDF 28.6 KB |
| Ex13c Freq Justifcation amended | Cover Letter(s) | 2010-12-15 | PDF 27.6 KB |
| MPE | RF Exposure Info | 2015-02-25 | PDF 230.5 KB |
| Ex11 Rev A 1of2 Amended RFx Report | RF Exposure Info | 2010-12-15 | PDF 3.9 MB |
| Ex11 Rev A 2of2 Amended RFx Report | RF Exposure Info | 2010-12-15 | PDF 3.3 MB |
| Schematics Metadata only | Schematics | PDF 743.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 46.4 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 11 KB |
Application Information
| Application ID | lOp5NPFNJfiCflwRm+AUWg== |
|---|---|
| Final Action Date | 2017-03-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003778479 |
| Model | 89FT3829 |
| Frequency Range | 136-174 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | 2-Way Portable Radio with Bluetooth |
| Responsible Party | Deanna Zakharia, Regulatory Compliance Manager, deanna.zakharia@motorolasolutions.com , 9547234707 |
| Test Firm | Sze Khian Ho, Motorola Solutions Malaysia Sdn Bhd, csh090@motorolasolutions.com , 6048503136 |
| TCB Email | jwoods@tuvam.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Operating channel selection and frequency programming shall be in accordance with 90.203(g), 90.427, 80.203(b) as described in this filing. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational / Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. Class II Change to add new Part 22 and 74 emission designators. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lOp5NPFNJfiCflwRm+AUWg== | 2017-03-31 | Class II permissive change or modification of presently authorized equipment |
| 2oNqaidoEE9nqAK1qhXVWA== | 2015-02-25 | Class II permissive change or modification of presently authorized equipment |
| 642npcfveYekXCD2CXu7NQ== | 2014-02-24 | Class II permissive change or modification of presently authorized equipment |
| 3Y/LLawsn1lvaRxXqTY7Lw== | 2014-02-20 | Class II permissive change or modification of presently authorized equipment |
| rczguiJFrEpW3CgRKwCYmQ== | 2010-12-15 | Original Equipment |
| Z2rns7H5jhM9EnulLW+6OA== | 2010-12-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 136-174 MHz | 6 | 1.5ppm | 16K0F3E | 22, 80, 9 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 16K0F3E | 80, 9 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 16K0F3E | 22, 80, 9 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 20K0F1E | 22, 74 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 16K0F3E | 80, 9 | BE |
| 136-174 MHz | 6 | 1.5ppm | 11K0F3E | 90.21 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 20K0F1E | 80, 9 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 11K0F3E | 90.21 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 16K0F3E | 22, 74, 8 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 11K0F3E | 90.21 | BE |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1E | 90.21 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1E | 90.21 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 11K0F3E | 22, 74, 9 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 20K0F1E | 80, 9 | BE |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1D | 90.21 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1D | 90.21 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1D | 22, 74, 9 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1D | 90.21 | BE |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1W | 90.210(e) | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1W | 90.210(e) | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1E | 22, 74, 9 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1E | 90.21 | BE |
| 136-174 MHz | 6 | 1.5ppm | 20K0F1E | 22, 80, 9 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 20K0F1E | 22, 80, 9 | BE, EF |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1W | 22, 74, 9 | BE, EF, ES |
| 136-174 MHz | 6 | 1.5ppm | 8K10F1W | 90.210(e) | BE |
| 2402-2480 MHz | 0.0100000 | 0.5000000000ppm | 15C |
Grants
TCB Grant - Application Z2rns7H5jhM9EnulLW+6OA==
This application does not exist.
EAS Grant - Application Z2rns7H5jhM9EnulLW+6OA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 12/15/2010 Application Dated: 11/15/2010 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable 2-way Radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE | 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE | 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| BE | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 12/15/2010 Application Dated: 11/15/2010 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intergrated Bluetooth in 2-way Portable Radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.01 | 0.5 PM |
| Output power is conducted. The antenna used for this transmitter is installed for use in a final-product with other licensed and/or unlicensed transceiver(s) under this FCC ID. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 03/31/2017 Application Dated: 03/31/2017 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | 2-Way Portable Radio with Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF | 22, 74 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| BE EF | 22, 74, 80 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Operating channel selection and frequency programming shall be in accordance with 90.203(g), 90.427, 80.203(b) as described in this filing. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational / Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. Class II Change to add new Part 22 and 74 emission designators. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
EAS Grant - Application lOp5NPFNJfiCflwRm+AUWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 03/31/2017 Application Dated: 03/31/2017 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | 2-Way Portable Radio with Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF | 22, 74 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| BE EF | 22, 74, 80 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF ES | 22, 74, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Operating channel selection and frequency programming shall be in accordance with 90.203(g), 90.427, 80.203(b) as described in this filing. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational / Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. Class II Change to add new Part 22 and 74 emission designators. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/24/2014 Application Dated: 02/21/2014 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | PORTABLE 2-WAY RADIO W/BT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| BE EF | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. (Date of Grant: 12/15/2010) Class II Permissive Change: This Class II Permissive change is to add Rule Part 22 frequency band grant, to replace the Power Amplifier, and to add an RF switch. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application 642npcfveYekXCD2CXu7NQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/24/2014 Application Dated: 02/21/2014 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | PORTABLE 2-WAY RADIO W/BT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| BE EF | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. (Date of Grant: 12/15/2010) Class II Permissive Change: This Class II Permissive change is to add Rule Part 22 frequency band grant, to replace the Power Amplifier, and to add an RF switch. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/20/2014 Application Dated: 12/04/2012 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable 2 Way Radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF | 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF | 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Operating channel selection and frequency programming shall be in accordance with 90.203(g), 90.427, 80.203(b) as described in this filing. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational / Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational / Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/25/2015 Application Dated: 02/25/2015 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable 2-way Radio w/BT |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF ES | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF ES | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| BE EF ES | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. (Date of Grant: 12/15/2010) Class II Permissive Change: This Class II Permissive change is to add Rule Part 22 frequency band grant, to replace the Power Amplifier, and to add an RF switch. (Date of Grant: 02/24/2014) Class II Permissive Change: This Class II Permissive Change is for the addition of a new Vehicular Adapter accessory, and the addition of 6 antennas to be used in conjunction with the Vehicular Adapter. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
EAS Grant - Application 2oNqaidoEE9nqAK1qhXVWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/25/2015 Application Dated: 02/25/2015 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT3829 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable 2-way Radio w/BT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BE EF ES | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 16K0F3E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 11K0F3E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1E |
| BE EF ES | 90.210 | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1D |
| BE EF ES | 90.210(e) | 136.0 - 174.0 | 6.0 | 1.5 PM | 8K10F1W |
| BE EF ES | 22, 80, 90 | 136.0 - 174.0 | 6.0 | 1.5 PM | 20K0F1E |
| Output power listed is rated conducted; maximum conducted output power is 7.2 W as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antenna(s) tested for this filing in push-to-talk held-near-face and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip, battery, and audio accessory configurations tested for this filing, and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50 %. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting occupational exposure requirements, and users must be provided with the training information. The highest reported SAR values for FCC-authorized operations accounting for a 50 % duty factor, are: head 0.75 W/kg, body 2.52 W/kg. (Date of Grant: 12/15/2010) Class II Permissive Change: This Class II Permissive change is to add Rule Part 22 frequency band grant, to replace the Power Amplifier, and to add an RF switch. (Date of Grant: 02/24/2014) Class II Permissive Change: This Class II Permissive Change is for the addition of a new Vehicular Adapter accessory, and the addition of 6 antennas to be used in conjunction with the Vehicular Adapter. |
| BE: | The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
| Mail To: |