FCC ID AZ489FT4845

HAND HELD TRANSMITTER

by Motorola Solutions, Inc.

Grantee Code: AZ4   Product Code: 89FT4845
Latest application date: 2008-05-21

FCC ID Device Details

FCC IDAZ489FT4845
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAZ4
Product Code89FT4845
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassHAND HELD TRANSMITTER
Test FirmMotorola

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
450-520 MHzClass II permissive change or modification of presently authorized equipment2008-05-21
450-520 MHzClass II permissive change or modification of presently authorized equipment2006-12-07
450-520 MHzClass II permissive change or modification of presently authorized equipment2006-08-03
450-520 MHzClass II permissive change or modification of presently authorized equipment2005-12-13
450-520 MHzOriginal Equipment2001-09-06

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2001-09-06PDF 633.1 KB
Internal Photos - Corrupted FileInternal Photos2001-09-06PDF 288.6 KB
External PhotosExternal Photos2001-09-06PDF 495.8 KB
ID Label and General InformationID Label/Location Info2001-09-06PDF 110.9 KB
Circuit DescriptionsBlock Diagram2001-09-06PDF 11.1 KB
Schematic DiagramsSchematics2001-09-06PDF 225.1 KB
Operational DescriptionOperational Description2001-09-06PDF 7.2 KB
Test Setup ProceduresTest Setup Photos2001-09-06PDF 14.1 KB
TEST REPORTTest Report2008-05-21PDF 1.3 MB
TEST REPORTTest Report2006-12-07PDF 103.5 KB
test reportTest Report2006-08-03PDF 626.9 KB
TEST REPORTTest Report2005-12-13PDF 1.9 MB
Test ReportTest Report2001-09-06PDF 411.2 KB
Certification of DataAttestation Statements2001-09-06PDF 5.2 KB
CONFIDENTIAL LETTERCover Letter(s)2008-05-21PDF 27.1 KB
COVER LETTERCover Letter(s)2008-05-21PDF 29.3 KB
COVER LETTERCover Letter(s)2006-12-07PDF 42.6 KB
cover letterCover Letter(s)2006-08-03PDF 35.4 KB
CLASSII CHANGE LETTERCover Letter(s)2005-12-13PDF 80.2 KB
Cover LetterCover Letter(s)2001-09-06PDF 19 KB
SAR REPORTRF Exposure Info2005-12-13PDF 1.5 MB
Additional response to corres 19772 used for EA100436RF Exposure Info2001-09-06PDF 19.8 KB
New SAR ReportRF Exposure Info2001-09-06PDF 1.5 MB
Parts ListParts List/Tune Up Info2001-09-06PDF 232.6 KB
Resending RF Exposure ExhibitRF Exposure Info2001-09-06PDF 1.6 MB
Response to Corres 19772RF Exposure Info2001-09-06PDF 762.9 KB
Response to corrs20052RF Exposure Info2001-09-06PDF 14.6 KB
Tune Up InfoParts List/Tune Up Info2001-09-06PDF 12.9 KB

Application Information

Application IDsb+iaZ7mjPucR/h02UeAuA==
Final Action Date2008-05-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003778479
Model89FT4845
Frequency Range450-520 MHz
Equipment ClassTNF - Licensed Non-Broadcast Transmitter Held to Face
Device DescriptionHAND HELD TRANSMITTER
Responsible PartyKim Uong, Regulatory Compliance Engineer, EKU001@motorolasolutions.com , 9547235422
Test FirmWilliam Elliott, Motorola, FME001@motorolasolutions.com , 954-723-5480
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 2.32 W/kg; Body-worn: 3.64 W/kg at 50% duty factor. The power is variable from 1.0 to 4.6 Watts.

Applications

Application IDDatePurpose
sb+iaZ7mjPucR/h02UeAuA==2008-05-21Class II permissive change or modification of presently authorized equipment
ymNhoIHFzqpOyzbfencSbA==2006-12-07Class II permissive change or modification of presently authorized equipment
ZY6N0tvMoBOCsQx+rzyAAA==2006-08-03Class II permissive change or modification of presently authorized equipment
oXbLr534fc7rq7suRgCpJQ==2005-12-13Class II permissive change or modification of presently authorized equipment
ETUGTqUG7M83JHiSIP56yQ==2001-09-06Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
450-520 MHz4.62.5ppm11K0F3E90.21
450-520 MHz4.62.5ppm16K0F3E9
450-520 MHz4.62.5ppm16K0F3E90.21
450-520 MHz4.62.5ppm11K0F3E9

Grants

TCB Grant - Application ZY6N0tvMoBOCsQx+rzyAAA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/03/2006

Application Dated: 08/03/2006
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Hand Held Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.

This Class II Change adds: bypasses and ferrite beads.


EAS Grant - Application ZY6N0tvMoBOCsQx+rzyAAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 08/03/2006

Application Dated: 08/03/2006
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Hand Held Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.

This Class II Change adds: bypasses and ferrite beads.



TCB Grant - Application ymNhoIHFzqpOyzbfencSbA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/07/2006

Application Dated: 12/07/2006
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.


EAS Grant - Application ymNhoIHFzqpOyzbfencSbA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/07/2006

Application Dated: 12/07/2006
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.



TCB Grant - Application sb+iaZ7mjPucR/h02UeAuA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/21/2008

Application Dated: 05/21/2008
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 2.32 W/kg; Body-worn: 3.64 W/kg at 50% duty factor. The power is variable from 1.0 to 4.6 Watts.

EAS Grant - Application sb+iaZ7mjPucR/h02UeAuA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 05/21/2008

Application Dated: 05/21/2008
 
Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 2.32 W/kg; Body-worn: 3.64 W/kg at 50% duty factor. The power is variable from 1.0 to 4.6 Watts.



TCB Grant - Application oXbLr534fc7rq7suRgCpJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/13/2005

Application Dated: 12/13/2005
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90.210 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.


EAS Grant - Application oXbLr534fc7rq7suRgCpJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/13/2005

Application Dated: 12/13/2005
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: HAND HELD TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 450.0  -  520.0 4.6 2.5  PM 16K0F3E
90.210 450.0  -  520.0 4.6 2.5  PM 11K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 3.63 W/kg; Body-worn: 5.26 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.



TCB Grant - Application ETUGTqUG7M83JHiSIP56yQ==

This application does not exist.

EAS Grant - Application ETUGTqUG7M83JHiSIP56yQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/06/2001

Application Dated: 05/17/2001
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT4845
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Hand Held Transmitter Held to the Face
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.210 450.0  -  520.0 4.6 2.5  PM 11K0F3E
90 450.0  -  520.0 4.6 2.5  PM 16K0F3E

Output is at the antenna terminal on the device. This transmitter may operate with a quarter-wave helical or quarter-wave whip antenna, as tested in this filing for Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. It must be used for work related operations, not exceeding a maximum transmitting duty factor of 50% for satisfying RF exposure compliance. Qualifying end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values as measured are - Head: 2.32 W/kg; Body-worn: 3.64 W/kg at 50% duty factor.

The power is variable from 1.0 to 4.6 Watts.



Mail To: