FCC ID AZ489FT4855

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 05/14/2003 Application Dated: 05/02/2003

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Astro XTS5000
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE	80, 90	380.0  -  470.0	5.7	2.0  PM	16K0F3E
BE	80, 90.210	380.0  -  470.0	5.7	2.0  PM	11K0F3E
BE	80, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1D
BE	80, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1E
BE	80, 90	380.0  -  470.0	5.7	2.0  PM	20K0F1E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the three antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are - Head: 4.0 W/kg; Body-worn: 7.0 W/kg accounting for a 50% duty cycle.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.

TCB Grant - Application FBOmJv04AH0ZEsDmO7bi5A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 09/13/2004 Application Dated: 09/13/2004

Motorola Solutions, Inc.

8000 West Sunrise Blvd

Ft Lauderdale, FL 33322

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	ASTRO XTS5000 UHF R1

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	16K0F3E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	11K0F3E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1D
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	20K0F1E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the three antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are - Head: 4.0 W/kg; Body-worn: 7.0 W/kg accounting for a 50% duty cycle.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 09/13/2004 Application Dated: 09/13/2004

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	ASTRO XTS5000 UHF R1
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	16K0F3E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	11K0F3E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1E
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1D
BE	80, 90, 90.210	380.0  -  470.0	5.7	2.0  PM	20K0F1E

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the three antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are - Head: 4.0 W/kg; Body-worn: 7.0 W/kg accounting for a 50% duty cycle.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.

TCB Grant - Application 3ODZ7NipR83veRcfiORb0A==

EAS Grant - Application 3ODZ7NipR83veRcfiORb0A==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 04/03/2003 Application Dated: 11/22/2002

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Astro XTS 5000
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	80, 90	380.0  -  470.0	5.7	2.0  PM	16K0F3E
	80, 90.210	380.0  -  470.0	5.7	2.0  PM	11K0F3E
	80, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1D
	80, 90.210	380.0  -  470.0	5.7	2.0  PM	8K10F1E
	80, 90	380.0  -  470.0	5.7	2.0  PM	20K0F1E

This application was originally granted on 02/28/2003.

Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the three antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are - Head: 4.0 W/kg; Body-worn: 7.0 W/kg accounting for a 50% duty cycle.

Mail To: