FCC ID AZ489FT4863

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 12/19/2003 Application Dated: 10/09/2003

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4863
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	CLS1450C Cordless Phone and Base
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90.210	461.0375  -  469.5625	1.1	600.0  Hz	11K0F3E

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in push-to-talk held-to-face, cordless phone held-to-ear, and body-worn configurations. SAR compliance was demonstrated for General Population/Uncontrolled and Occupational/Controlled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device muset be restricted to work-related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct end-users to specific training or workplace RF safety program information for meeting the fully-aware and exercise-control Occupational/Controlled exposure requirements, and end-users must be provided with the training information. The highest reported SAR values are - Part 15: head 0.05 W/kg; body-worn 0.03 W/kg; Part 90 with 50% usage-based duty factor: head 1.13 W/kg; body-worn 0.92 W/kg.

TCB Grant - Application 2VqDEhKjJH1IndFWy2se4A==

EAS Grant - Application 2VqDEhKjJH1IndFWy2se4A==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 12/19/2003 Application Dated: 10/09/2003

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4863
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	CLS1450C Cordless Phone and Base
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2400.8  -  2482.2	0.35

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in push-to-talk held-to-face, cordless phone held-to-ear, and body-worn configurations. SAR compliance was demonstrated for General Population/Uncontrolled and Occupational/Controlled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device muset be restricted to work-related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct end-users to specific training or workplace RF safety program information for meeting the fully-aware and exercise-control Occupational/Controlled exposure requirements, and end-users must be provided with the training information. The highest reported SAR values are - Part 15: head 0.05 W/kg; body-worn 0.03 W/kg; Part 90 with 50% usage-based duty factor: head 1.13 W/kg; body-worn 0.92 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: