FCC ID AZ489FT4883

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 09/23/2008 Application Dated: 09/23/2008

Motorola Solutions, Inc.

8000 West Sunrise Blvd

Ft Lauderdale, FL 33322

Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4883
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Portable 2-Way Radio

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	435.0  -  480.0	4.0	2.5  PM	11K0F3E
EF	90	435.0  -  480.0	4.0	2.5  PM	16K0F3E

Power listed is conducted. Maximum conducted output power is 4.8W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR levels are: Head: 4.45 W/kg for 50% Duty Cycle; Body: 5.65 W/kg for 50% Duty Cycle. Power output is continuously variable from the value listed to 2 W.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 09/23/2008 Application Dated: 09/23/2008

Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4883
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	Portable 2-Way Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	435.0  -  480.0	4.0	2.5  PM	11K0F3E
EF	90	435.0  -  480.0	4.0	2.5  PM	16K0F3E

Power listed is conducted. Maximum conducted output power is 4.8W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR levels are: Head: 4.45 W/kg for 50% Duty Cycle; Body: 5.65 W/kg for 50% Duty Cycle. Power output is continuously variable from the value listed to 2 W.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application ESjiKGYK3C8MmRyUoRbK8g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 05/14/2010 Application Dated: 05/14/2010

Motorola Solutions, Inc.

8000 West Sunrise Blvd

Ft Lauderdale, FL 33322

Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4883
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	PORTABLE 2-WAY RADIO

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	435.0  -  480.0	4.0	2.5  PM	11K0F3E
EF	90	435.0  -  480.0	4.0	2.5  PM	16K0F3E

Power listed is conducted. Maximum conducted output power is 4.8W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR levels are: Head: 4.45 W/kg for 50% Duty Cycle; Body: 5.65 W/kg for 50% Duty Cycle. Power output is continuously variable from the value listed to 2 W. (Orig. Date: 09/23/2008) Class II Change: Reduced power output from value listed to 1 W.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 05/14/2010 Application Dated: 05/14/2010

Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT4883
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Licensed Non-Broadcast Transmitter Held to Face
Notes:	PORTABLE 2-WAY RADIO
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EF	90	435.0  -  480.0	4.0	2.5  PM	11K0F3E
EF	90	435.0  -  480.0	4.0	2.5  PM	16K0F3E

Power listed is conducted. Maximum conducted output power is 4.8W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 2.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR levels are: Head: 4.45 W/kg for 50% Duty Cycle; Body: 5.65 W/kg for 50% Duty Cycle. Power output is continuously variable from the value listed to 2 W. (Orig. Date: 09/23/2008) Class II Change: Reduced power output from value listed to 1 W.

EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: