FCC ID AZ489FT5803
Hand Held Portable Transmitter
by Motorola Solutions, Inc.
Grantee Code: AZ4 Product Code: 89FT5803
Latest application date: 2007-04-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 896-902 MHz | Class II permissive change or modification of presently authorized equipment | 2007-04-06 |
| 896-902 MHz | Original Equipment | 2001-09-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual must be corrected per FYI correspondence. | Users Manual | 2001-09-06 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2001-09-06 | PDF 405.5 KB |
| External Photos | External Photos | 2001-09-06 | PDF 264.1 KB |
| FCC ID Label andGeneral Info | ID Label/Location Info | 2001-09-06 | PDF 44 KB |
| Circuit Descriptions | Block Diagram | 2001-09-06 | PDF 9.1 KB |
| Schematic Diagrams | Schematics | 2001-09-06 | PDF 259 KB |
| Operational Description | Operational Description | 2001-09-06 | PDF 6.4 KB |
| Test Setup Procedures | Test Setup Photos | 2001-09-06 | PDF 14.8 KB |
| report of measurements | Test Report | 2007-04-06 | PDF 52.3 KB |
| Test Report | Test Report | 2001-09-06 | PDF 226.1 KB |
| report attestation | Attestation Statements | 2007-04-06 | PDF 12.3 KB |
| Certification of data | Attestation Statements | 2001-09-06 | PDF 5.5 KB |
| reason for class II change | Cover Letter(s) | 2007-04-06 | PDF 27.8 KB |
| Cover Letter | Cover Letter(s) | 2001-09-06 | PDF 10.6 KB |
| Parts List and Tuneup Info | Parts List/Tune Up Info | 2001-09-06 | PDF 26.7 KB |
| RF Exposure Statement | RF Exposure Info | 2001-09-06 | PDF 4.3 KB |
| Reissued SAR Report | RF Exposure Info | 2001-09-06 | PDF 2 MB |
| Resp to SAR Questions | RF Exposure Info | 2001-09-06 | PDF 7.6 KB |
| Response to correspondence 19312 | RF Exposure Info | 2001-09-06 | PDF 49.5 KB |
| SAR Report OLD | RF Exposure Info | 2001-09-06 | PDF 1.2 MB |
Application Information
| Application ID | BZbaZbNHheUeaMwzMYYKVg== |
|---|---|
| Final Action Date | 2007-04-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003778479 |
| Model | 89FT5803 |
| Frequency Range | 896-902 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | Hand Held Portable Transmitter |
| Responsible Party | Kim Uong, Regulatory Compliance Engineer, EKU001@motorolasolutions.com  , 9547235422 |
| Test Firm | William Elliott, Motorola, FME001@motorolasolutions.com , 954-723-5480 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output is at the antenna terminal on the device. This transmitter may operate with the two antennas described in this filing in Push-to-Talk and body-worn operating configurations. Body-worn SAR compliance is limited to the specific belt-clips and carrying cases described in this filing. This transmitter only satisfies SAR limit for Occupational/Controlled RF Exposure Environment and must operate at duty factors not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to provide users with appropriate training for meeting RF exposure requirements. The highest reported SAR values as measured are - Head: 2.71 W/kg; Body-worn: 5.35 W/kg, both at 50% duty factor. CLASS II CHANGE: This Class II Change adds alternate components for compliance with the RoHS requirements. No other changes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| BZbaZbNHheUeaMwzMYYKVg== | 2007-04-06 | Class II permissive change or modification of presently authorized equipment |
| XzHoMoXZv4cuXdHo3vFJHA== | 2001-09-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XzHoMoXZv4cuXdHo3vFJHA==
This application does not exist.
EAS Grant - Application XzHoMoXZv4cuXdHo3vFJHA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 09/06/2001 Application Dated: 03/23/2001 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5803 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Hand Held Portable Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 90 | 896.0 - 902.0 | 2.85 | 1.5 PM | 11K0F3E |
| BJ | 90 | 935.0 - 941.0 | 2.85 | 1.5 PM | 11K0F3E |
| Output is at the antenna terminal on the device. This transmitter may operate with the two antennas described in this filing in Push-to-Talk and body-worn operating configurations. Body-worn SAR compliance is limited to the specific belt-clips and carrying cases described in this filing. This transmitter only satisfies SAR limit for Occupational/Controlled RF Exposure Environment and must operate at duty factors not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to provide users with appropriate training for meeting RF exposure requirements. The highest reported SAR values as measured are - Head: 2.71 W/kg; Body-worn: 5.35 W/kg, both at 50% duty factor. |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 04/06/2007 Application Dated: 04/06/2007 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5803 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Hand Held Portable Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 90 | 896.0 - 902.0 | 2.85 | 1.5 PM | 11K0F3E |
| BJ | 90 | 935.0 - 941.0 | 2.85 | 1.5 PM | 11K0F3E |
| Output is at the antenna terminal on the device. This transmitter may operate with the two antennas described in this filing in Push-to-Talk and body-worn operating configurations. Body-worn SAR compliance is limited to the specific belt-clips and carrying cases described in this filing. This transmitter only satisfies SAR limit for Occupational/Controlled RF Exposure Environment and must operate at duty factors not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to provide users with appropriate training for meeting RF exposure requirements. The highest reported SAR values as measured are - Head: 2.71 W/kg; Body-worn: 5.35 W/kg, both at 50% duty factor. CLASS II CHANGE: This Class II Change adds alternate components for compliance with the RoHS requirements. No other changes. |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
EAS Grant - Application BZbaZbNHheUeaMwzMYYKVg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States | Date of Grant: 04/06/2007 Application Dated: 04/06/2007 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5803 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Hand Held Portable Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 90 | 896.0 - 902.0 | 2.85 | 1.5 PM | 11K0F3E |
| BJ | 90 | 935.0 - 941.0 | 2.85 | 1.5 PM | 11K0F3E |
| Output is at the antenna terminal on the device. This transmitter may operate with the two antennas described in this filing in Push-to-Talk and body-worn operating configurations. Body-worn SAR compliance is limited to the specific belt-clips and carrying cases described in this filing. This transmitter only satisfies SAR limit for Occupational/Controlled RF Exposure Environment and must operate at duty factors not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to provide users with appropriate training for meeting RF exposure requirements. The highest reported SAR values as measured are - Head: 2.71 W/kg; Body-worn: 5.35 W/kg, both at 50% duty factor. CLASS II CHANGE: This Class II Change adds alternate components for compliance with the RoHS requirements. No other changes.
|
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
| Mail To: |
| EA652662 |