FCC ID AZ489FT5844
IDEN I850 WITH WIDEN MOTOTALK
by Motorola Solutions, Inc.
Grantee Code: AZ4 Product Code: 89FT5844
Latest application date: 2008-02-01
FCC ID Device Details
Hearing Aid Compatibility
| Handset Maker | Motorola |
|---|---|
| Model Name | i855 |
| Air Interface Technologies | iDEN, iDEN |
| Operating Frequency Bands | 800, 900 |
| M-Rating | M3 |
| M-Rating Certification Date | 08/16/06 |
| M-Rating ANSI Version | 2005 |
| T-Rating | T3 |
| T-Rating Certification Date | 08/16/06 |
| T-Rating ANSI Version | 2005 |
| Wi-Fi Interface | N |
| Remarks | NOTE: This is an older model that is still shipping. The actual version of the C63.19 standard used for certification was 2001, but there is no option for this in Form 655. Because the form requires a version to be selected, 2005 was used as a placeholder. |
Source: FCC archived Device Manufacturer Summary Reports (2009-2012).
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 806-825 MHz | Class II permissive change or modification of presently authorized equipment | 2008-02-01 |
| 902-928 MHz | Class II permissive change or modification of presently authorized equipment | 2008-02-01 |
| 806-825 MHz | Class II permissive change or modification of presently authorized equipment | 2006-08-16 |
| 806-825 MHz | Class II permissive change or modification of presently authorized equipment | 2006-02-17 |
| 806-825 MHz | Class II permissive change or modification of presently authorized equipment | 2005-08-08 |
| 806-825 MHz | Original Equipment | 2005-04-27 |
| 902-928 MHz | Original Equipment | 2005-04-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Draft Users Manual | Users Manual | 2006-08-16 | PDF 688.8 KB |
| HAC and TCoil Rating | Users Manual | 2006-08-16 | PDF 12.9 KB |
| USERS MANUAL | Users Manual | 2006-02-17 | PDF 359.7 KB |
| users manual insert | Users Manual | 2005-08-08 | PDF 41.9 KB |
| users manual with HAC info | Users Manual | 2005-08-08 | PDF 43.7 KB |
| users manual 1 | Users Manual | 2005-04-27 | PDF 3.5 MB |
| users manual 2 | Users Manual | 2005-04-27 | PDF 814.4 KB |
| internal photos | Internal Photos | 2005-06-11 | PDF 129 KB |
| external photos | External Photos | 2005-06-11 | PDF 186.1 KB |
| HAC rating label | ID Label/Location Info | 2005-08-08 | PDF 21.9 KB |
| label sample and location | ID Label/Location Info | 2005-04-27 | PDF 135.9 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2008-02-01 | PDF 137.4 KB |
| test setup photos 1 | Test Setup Photos | 2005-04-27 | PDF 135.8 KB |
| test setup photos 2 | Test Setup Photos | 2005-04-27 | PDF 156.8 KB |
| test setup photos 3 | Test Setup Photos | 2005-04-27 | PDF 202.1 KB |
| HAC report for i450 | Test Report | 2005-08-08 | PDF 2.5 MB |
| HAC report for i560 | Test Report | 2005-08-08 | PDF 2.5 MB |
| HAC report for i760 | Test Report | 2005-08-08 | PDF 2.7 MB |
| HAC report for i850 | Test Report | 2005-08-08 | PDF 2.5 MB |
| response data to RT 22581 and 22718 for i450 | Test Report | 2005-08-08 | PDF 3.7 MB |
| response data to RT 22581 and 22718 for i560 | Test Report | 2005-08-08 | PDF 3.7 MB |
| response data to RT 22581 and 22718 for i760 | Test Report | 2005-08-08 | PDF 3.7 MB |
| response data to RT 22581 and 22718 for i850 | Test Report | 2005-08-08 | PDF 3.7 MB |
| erp | Test Report | 2005-04-27 | PDF 38.4 KB |
| frequency stability | Test Report | 2005-04-27 | PDF 34.5 KB |
| measurement procedures | Test Report | 2005-04-27 | PDF 60 KB |
| mt | Test Report | 2005-04-27 | PDF 98.9 KB |
| mt | Test Report | 2005-04-27 | PDF 99.6 KB |
| mt radiated emissions | Test Report | 2005-04-27 | PDF 68.3 KB |
| mt radiated emissions part 1 | Test Report | 2005-04-27 | PDF 68.3 KB |
| mt radiated emissions part 2 | Test Report | 2005-04-27 | PDF 104.8 KB |
| occupied bandwidth | Test Report | 2005-04-27 | PDF 68.3 KB |
| powerline | Test Report | 2005-04-27 | PDF 108.2 KB |
| tx occupied bandwidth | Test Report | 2005-04-27 | PDF 1.8 MB |
| tx power | Test Report | 2005-04-27 | PDF 19.9 KB |
| tx power | Test Report | 2005-04-27 | PDF 23.4 KB |
| tx radiated emissions | Test Report | 2005-04-27 | PDF 143.3 KB |
| Ex 2 Attestation Stmnt | Attestation Statements | 2006-08-16 | PDF 16.6 KB |
| COVER LETTER | Cover Letter(s) | 2008-02-01 | PDF 28.5 KB |
| PC2 Cover Letter | Cover Letter(s) | 2006-08-16 | PDF 27.7 KB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2006-02-17 | PDF 32.5 KB |
| class II change letter | Cover Letter(s) | 2005-08-08 | PDF 81.5 KB |
| response letter to RT 22581 and 22718 | Cover Letter(s) | 2005-08-08 | PDF 70.9 KB |
| cover letter | Cover Letter(s) | 2005-04-27 | PDF 36 KB |
| request for confidentiality | Cover Letter(s) | 2005-04-27 | PDF 30.8 KB |
| RF EXPOSURE 1 | RF Exposure Info | 2008-02-01 | PDF 1.5 MB |
| RF EXPOSURE 2 | RF Exposure Info | 2008-02-01 | PDF 1.2 MB |
| RF Tcoil Exp Report 1of 2 | RF Exposure Info | 2006-08-16 | PDF 603.9 KB |
| RF Tcoil Exp Report 2of2 | RF Exposure Info | 2006-08-16 | PDF 3.5 MB |
| Resp to TCoil Corrs 31115 | RF Exposure Info | 2006-08-16 | PDF 95.9 KB |
| TCoil HAC Report | RF Exposure Info | 2006-08-16 | PDF 270.9 KB |
| SAR REPORT 1 | RF Exposure Info | 2006-02-17 | PDF 2.9 MB |
| SAR REPORT 2 | RF Exposure Info | 2006-02-17 | PDF 2 MB |
| powerline | Parts List/Tune Up Info | 2005-04-27 | PDF 108.2 KB |
| sar report 2 | RF Exposure Info | 2005-04-27 | PDF 2 MB |
| sar report 1 | RF Exposure Info | 2005-04-27 | PDF 3.1 MB |
| sar report 3 | RF Exposure Info | 2005-04-27 | PDF 1.6 MB |
| block diagram Metadata only | Block Diagram | PDF 61.1 KB | |
| schematics Metadata only | Schematics | PDF 288.3 KB | |
| circuit description Metadata only | Operational Description | PDF 61.1 KB | |
| tx characteristics Metadata only | Operational Description | PDF 90 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 35.8 KB | |
| tune up info Metadata only | Parts List/Tune Up Info | PDF 35.8 KB | |
| tune up information Metadata only | Parts List/Tune Up Info | PDF 35.8 KB |
Application Information
| Application ID | vPun7MVQhXcyeCp4UetEUQ== |
|---|---|
| Final Action Date | 2008-02-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003778479 |
| Model | 89FT5844 |
| Frequency Range | 806-825 MHz |
| Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear |
| Device Description | IDEN I850 WITH WIDEN MOTOTALK |
| Responsible Party | Kim Uong, Regulatory Compliance Engineer, EKU001@motorolasolutions.com  , 9547235422 |
| Test Firm | William Elliott, Motorola, FME001@motorolasolutions.com , 954-723-5480 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. This 'receive first' type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.49 W/kg, Head: 1.12 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds a new version of a Battery Pack SNN7505. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has not been evaluated in this filing. HAC Rating: M3 T3 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vPun7MVQhXcyeCp4UetEUQ== | 2008-02-01 | Class II permissive change or modification of presently authorized equipment |
| Lo8RS+SSpn21Ogb6fDhe9A== | 2008-02-01 | Class II permissive change or modification of presently authorized equipment |
| nQu0dk8jBSi290bKsDIw+g== | 2006-08-16 | Class II permissive change or modification of presently authorized equipment |
| lf9qN56wau4UcJUd5rVFGw== | 2006-02-17 | Class II permissive change or modification of presently authorized equipment |
| lnJUpWXadeJeOxMui58kMw== | 2005-08-08 | Class II permissive change or modification of presently authorized equipment |
| CAuz/pdgldrbs04FV6JJAg== | 2005-04-27 | Original Equipment |
| 6MieT87e+p3d6p8OqJGNJw== | 2005-04-27 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 806-825 MHz | 0.64 | 0.02ppm | 18K3D7W | 9 | |
| 806-825 MHz | 0.64 | 0.02ppm | 18K3D7W | 9 | HC |
| 806-825 MHz | 0.64 | 0.02ppm | 18K3D7W | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 43K3D7D | 9 | |
| 806-825 MHz | 0.64 | 0.02ppm | 43K3D7D | 9 | HC |
| 806-825 MHz | 0.64 | 0.02ppm | 43K3D7D | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 43K3D7W | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 68K3D7D | 9 | |
| 806-825 MHz | 0.64 | 0.02ppm | 68K3D7D | 9 | HC |
| 806-825 MHz | 0.64 | 0.02ppm | 68K3D7D | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 68K3D7W | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 93K3D7D | 9 | |
| 806-825 MHz | 0.64 | 0.02ppm | 93K3D7D | 9 | HC |
| 806-825 MHz | 0.64 | 0.02ppm | 93K3D7D | 9 | BD, HC |
| 806-825 MHz | 0.64 | 0.02ppm | 93K3D7W | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 18K3D7W | 9 | |
| 896-902 MHz | 0.64 | 0.08ppm | 18K3D7W | 9 | HC |
| 896-902 MHz | 0.64 | 0.08ppm | 18K3D7W | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 43K3D7D | 9 | |
| 896-902 MHz | 0.64 | 0.08ppm | 43K3D7D | 9 | HC |
| 896-902 MHz | 0.64 | 0.08ppm | 43K3D7D | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 43K3D7W | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 68K3D7D | 9 | |
| 896-902 MHz | 0.64 | 0.08ppm | 68K3D7D | 9 | HC |
| 896-902 MHz | 0.64 | 0.08ppm | 68K3D7D | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 68K3D7W | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 93K3D7D | 9 | |
| 896-902 MHz | 0.64 | 0.08ppm | 93K3D7D | 9 | HC |
| 896-902 MHz | 0.64 | 0.08ppm | 93K3D7D | 9 | BD, HC |
| 896-902 MHz | 0.64 | 0.08ppm | 93K3D7W | 9 | BD, HC |
| 902-928 MHz | 0.8900000 | 15C |
Grants
TCB Grant - Application vPun7MVQhXcyeCp4UetEUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 02/01/2008 Application Dated: 02/01/2008 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | IDEN I850 WITH WIDEN MOTOTALK |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7W |
| Power listed is conducted. This 'receive first' type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.49 W/kg, Head: 1.12 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds a new version of a Battery Pack SNN7505. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has not been evaluated in this filing. HAC Rating: M3 T3 |
| BD: | The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application vPun7MVQhXcyeCp4UetEUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/01/2008 Application Dated: 02/01/2008 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | IDEN I850 WITH WIDEN MOTOTALK |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7W |
| Power listed is conducted. This 'receive first' type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.49 W/kg, Head: 1.12 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds a new version of a Battery Pack SNN7505. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has not been evaluated in this filing. HAC Rating: M3 T3 |
| BD: | The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 08/16/2006 Application Dated: 05/17/2006 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | iDEN i850 with WiDEN, MOTOtalk |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D |
| BD HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D |
| BD HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This 'receive first' type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds an accessory. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has been evaluated for the near-body configurations as described in this filing; other collocated configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum reported co-located SAR value for this filing is: Body 1.58 W/kg. HAC Rating: M3 T3
|
| BD: | The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 02/01/2008 Application Dated: 02/01/2008 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IDEN I850 WITH WIDEN MOTOTALK |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.89 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Body: 1.15 W/kg, Face: 0.73 W/kg. This class 2 permissive change adds a new version of a Battery Pack SNN7505. |
EAS Grant - Application Lo8RS+SSpn21Ogb6fDhe9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/01/2008 Application Dated: 02/01/2008 |
| Attention: Kim Uong , Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IDEN I850 WITH WIDEN MOTOTALK |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.89 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Body: 1.15 W/kg, Face: 0.73 W/kg. This class 2 permissive change adds a new version of a Battery Pack SNN7505. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/08/2005 Application Dated: 08/08/2005 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | i850, i760, i560 and i450 with WiDEN, MOTOtalk |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. HAC Rating: M3 |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application lnJUpWXadeJeOxMui58kMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 08/08/2005 Application Dated: 08/08/2005 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | i850, i760, i560 and i450 with WiDEN, MOTOtalk |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. HAC Rating: M3 |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/17/2006 Application Dated: 02/17/2006 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | iDEN i850 WITH WiDEN, MOTOTALK |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds an accessory. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has been evaluated for the near-body configurations as described in this filing; other collocated configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum reported co-located SAR value for this filing is: Body 1.58 W/kg. HAC Rating: M3 |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application lf9qN56wau4UcJUd5rVFGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 02/17/2006 Application Dated: 02/17/2006 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | iDEN i850 WITH WiDEN, MOTOTALK |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D |
| HC | 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D |
| HC | 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. This class 2 permissive change adds an accessory. SAR compliance for collocated operating configurations with FCC ID AZ489FT7020 has been evaluated for the near-body configurations as described in this filing; other collocated configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The maximum reported co-located SAR value for this filing is: Body 1.58 W/kg. HAC Rating: M3 |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/27/2005 Application Dated: 04/27/2005 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | iDEN i850 with WiDEN, MOTOtalk |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. |
EAS Grant - Application CAuz/pdgldrbs04FV6JJAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 04/27/2005 Application Dated: 04/27/2005 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Ear |
| Notes: | iDEN i850 with WiDEN, MOTOtalk |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 18K3D7W | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 43K3D7D | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 68K3D7D | |
| 90 | 806.0 - 825.0 | 0.64 | 0.02 PM | 93K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 18K3D7W | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 43K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 68K3D7D | |
| 90 | 896.0 - 902.0 | 0.64 | 0.08 PM | 93K3D7D |
| Power listed is conducted. This ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. SAR compliance for body-worn operations is restricted to belt-clips, holsters and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. SAR was evaluated for held-to-ear and held-to-face operating modes. The highest reported SAR values are: Body: 1.15 W/kg, Head: 1.05 W/kg. Power output is continuously variable from the value listed to 0.088 W. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/27/2005 Application Dated: 04/27/2005 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | iDEN i850 with WiDEN, MOTOtalk |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.89 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Body: 1.15 W/kg, Face: 0.43 W/kg. |
EAS Grant - Application 6MieT87e+p3d6p8OqJGNJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 04/27/2005 Application Dated: 04/27/2005 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT5844 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | iDEN i850 with WiDEN, MOTOtalk |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.0 - 928.0 | 0.89 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. Use of other accessories for body-worn operations requires no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, whether extended or retracted, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Body: 1.15 W/kg, Face: 0.43 W/kg. |
| Mail To: |