FCC ID AZ489FT5855

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 12/14/2006 Application Dated: 12/14/2006

Motorola Solutions, Inc.

8000 West Sunrise Blvd

Ft Lauderdale, FL 33322

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT5855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	iDEN i325 WITH MOTOTalk

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  825.0	0.7	0.5  PM	18K3D7W
	90	896.0  -  901.0	0.7	0.1  PM	18K3D7W
	24D	901.0  -  902.0	0.7	0.1  PM	18K3D7W

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in full-duplex held-to-ear (Part 90), push-to-talk held-to-face (Parts 15 & 90), and body-worn (Parts 15 & 90) configurations. SAR compliance was demonstrated for General Population/Uncontrolled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Part 15: head 0.49 W/kg; body-worn 0.65 W/kg; Part 90: head 1.06 W/kg; body-worn 1.09 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 12/14/2006 Application Dated: 12/14/2006

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT5855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	iDEN i325 WITH MOTOTalk
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  825.0	0.7	0.5  PM	18K3D7W
	90	896.0  -  901.0	0.7	0.1  PM	18K3D7W
	24D	901.0  -  902.0	0.7	0.1  PM	18K3D7W

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in full-duplex held-to-ear (Part 90), push-to-talk held-to-face (Parts 15 & 90), and body-worn (Parts 15 & 90) configurations. SAR compliance was demonstrated for General Population/Uncontrolled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Part 15: head 0.49 W/kg; body-worn 0.65 W/kg; Part 90: head 1.06 W/kg; body-worn 1.09 W/kg.

TCB Grant - Application 8YpavoPCc/tD9rznqBnylg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 12/14/2006 Application Dated: 12/14/2006

Motorola Solutions, Inc.

8000 West Sunrise Blvd

Ft Lauderdale, FL 33322

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT5855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	iDEN i325 WITH MOTOTalk

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.525  -  927.475	0.891

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in full-duplex held-to-ear (Part 90), push-to-talk held-to-face (Parts 15 & 90), and body-worn (Parts 15 & 90) configurations. SAR compliance was demonstrated for General Population/Uncontrolled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Part 15: head 0.49 W/kg; body-worn 0.65 W/kg; Part 90: head 1.06 W/kg; body-worn 1.09 W/kg.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States

Date of Grant: 12/14/2006 Application Dated: 12/14/2006

Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	AZ489FT5855
Name of Grantee:	Motorola Solutions, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	iDEN i325 WITH MOTOTalk
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.525  -  927.475	0.891

Output is at the antenna terminal of the device, and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in full-duplex held-to-ear (Part 90), push-to-talk held-to-face (Parts 15 & 90), and body-worn (Parts 15 & 90) configurations. SAR compliance was demonstrated for General Population/Uncontrolled RF exposure situations. Body-worn SAR compliance is limited to the specific belt-clip and earbud configurations tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Part 15: head 0.49 W/kg; body-worn 0.65 W/kg; Part 90: head 1.06 W/kg; body-worn 1.09 W/kg.

Mail To: