FCC ID AZ489FT7023
802.11a/b/g WLAN Mini PCI Transmitter Module
by Motorola Solutions, Inc.
Grantee Code: AZ4 Product Code: 89FT7023
Latest application date: 2006-06-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 4942.5-4987.5 MHz | Original Equipment | 2006-06-08 |
| 2412-2462 MHz | Original Equipment | 2006-06-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Exhibit 8 Users Manual | Users Manual | 2006-07-23 | PDF 1.2 MB |
| Exhibit 9 Internal Photos | Internal Photos | 2006-07-23 | PDF 231.5 KB |
| Exhibit 3 External Photos | External Photos | 2006-07-23 | PDF 119.5 KB |
| Exhibit 1 FCC ID Label and Location | ID Label/Location Info | 2006-06-08 | PDF 106.4 KB |
| Exhibit 6a Test Setup Photos | Test Setup Photos | 2006-07-23 | PDF 506.4 KB |
| Exhibit 6b Test Setup Photos | Test Setup Photos | 2006-07-23 | PDF 506.4 KB |
| Exhibit 6 Test Report | Test Report | 2006-06-08 | PDF 1.3 MB |
| Supplemental Report Response to AZ40280 | Test Report | 2006-06-08 | PDF 11.8 KB |
| Supplemental Response to AZ40280 | Test Report | 2006-06-08 | PDF 11.8 KB |
| Exhibit 2a Attestation Statement | Attestation Statements | 2006-06-08 | PDF 12.3 KB |
| Exhibit 2b Modular Approval Request | Attestation Statements | 2006-06-08 | PDF 9.4 KB |
| Exhibit 13 Confidentiality Letter | Cover Letter(s) | 2006-06-08 | PDF 28.4 KB |
| Exhibit 13b Cover Letter | Cover Letter(s) | 2006-06-08 | PDF 25.6 KB |
| Exhibt 13a Confidentiality Request | Cover Letter(s) | 2006-06-08 | PDF 28.4 KB |
| Exhibit 11 MPE Data | RF Exposure Info | 2006-06-08 | PDF 48.2 KB |
| Exhibit 4 Block Diagram Metadata only | Block Diagram | PDF 69 KB | |
| Exhibit 5 Schematics Metadata only | Schematics | PDF 75 KB | |
| Exhibit 12 Operational Description Metadata only | Operational Description | PDF 26 KB | |
| Exhibit 10 Parts List and Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 18.3 KB |
Application Information
| Application ID | iY50fSBthILaugNqZsJMsA== |
|---|---|
| Final Action Date | 2006-06-08 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0003778479 |
| Model | 89FT7023 |
| Frequency Range | 4942.5-4987.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | 802.11a/b/g WLAN Mini PCI Transmitter Module |
| Responsible Party | Deanna Zakharia, Regulatory Compliance Manager, deanna.zakharia@motorolasolutions.com  , 9547234707 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com  , 410-290-6652 |
| Test Firm | William Elliott, Motorola, FME001@motorolasolutions.com , 954-723-5480 |
| TCB Email | randy@pctestlab.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Short-Term Confidentiality Date | 07/23/2006 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. Approval is limited to OEM installation only. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iY50fSBthILaugNqZsJMsA== | 2006-06-08 | Original Equipment |
| Vdj5qg1Fm7BI+BKuyYPoSQ== | 2006-06-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Vdj5qg1Fm7BI+BKuyYPoSQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 06/08/2006 Application Dated: 06/08/2006 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT7023 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g WLAN Mini PCI Transmitter Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.071 |
| Modular Approval. Power output is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. Approval is limited to OEM installation only. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. |
EAS Grant - Application Vdj5qg1Fm7BI+BKuyYPoSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 06/08/2006 Application Dated: 06/08/2006 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT7023 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g WLAN Mini PCI Transmitter Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.071 |
| Modular Approval. Power output is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. Approval is limited to OEM installation only. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 06/08/2006 Application Dated: 06/08/2006 |
| Motorola Solutions, Inc. |
| 8000 West Sunrise Blvd |
| Ft Lauderdale, FL 33322 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT7023 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 802.11a/b/g WLAN Mini PCI Transmitter Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 90 | 4942.5 - 4987.5 | 0.126 | 1.0 PM | 5M00X1D |
| BJ | 90 | 4945.0 - 4985.0 | 0.126 | 1.0 PM | 10M0X1D |
| BJ | 90 | 4950.0 - 4980.0 | 0.126 | 1.0 PM | 20M0X1D |
| Modular Approval. Power output is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. Approval is limited to OEM installation only. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
EAS Grant - Application iY50fSBthILaugNqZsJMsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motorola Solutions, Inc. 8000 West Sunrise Blvd Ft Lauderdale, FL 33322 United States |
Date of Grant: 06/08/2006 Application Dated: 06/08/2006 |
| Attention: Deanna Zakharia , Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZ489FT7023 |
| Name of Grantee: | Motorola Solutions, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | 802.11a/b/g WLAN Mini PCI Transmitter Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BJ | 90 | 4942.5 - 4987.5 | 0.126 | 1.0 PM | 5M00X1D |
| BJ | 90 | 4945.0 - 4985.0 | 0.126 | 1.0 PM | 10M0X1D |
| BJ | 90 | 4950.0 - 4980.0 | 0.126 | 1.0 PM | 20M0X1D |
| Modular Approval. Power output is conducted. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. Approval is limited to OEM installation only. This device may not be marketed or sold to the general public. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. In order to comply with RF Exposure limits, the final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. Products operating with this module are required to provide a minimum separation distance of 20 cm between the antenna and all persons during normal operation. Separate approval is required for all other operating configurations not described in filings under this FCC ID, including portable configurations with respect to 2.1093 and different antenna configurations. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. |
| BJ: | The output power is continuously variable from the value listed in this entry to 35%-40% of the value listed. |
| Mail To: |