FCC ID AZ489FT7133

Body worn 2-way portable radio

by Motorola Solutions, Inc.

Grantee Code: AZ4   Product Code: 89FT7133
Latest application date: 2022-11-22

FCC ID Device Details

FCC IDAZ489FT7133
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAZ4
Product Code89FT7133
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassBody worn 2-way portable radio
Test FirmMotorola Penang Advanced Communication Laboratory

Additional Linked Details

ManufacturerMotorola Solutions Inc.
Device NameMOTORBO ION
Model NumberMSLB-MKZ900
Certification Date2021-03-02
Manufacturer Website www.motorolasolutions.com/en_us/products/two-way-radios/mototrbo/portable-radios/mototrbo-ion-radio.html
Device TypeRugged Handheld
5G Certified

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
400-406 MHzClass II permissive change or modification of presently authorized equipment2022-11-22
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2022-11-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-11-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-11-22
3552.5-3697.5 MHzClass II permissive change or modification of presently authorized equipment2022-11-22
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
400-406 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
3552.5-3697.5 MHzClass II permissive change or modification of presently authorized equipment2021-09-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
3552.5-3697.5 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
400-406 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-12-21
3552.5-3697.5 MHzOriginal Equipment2020-11-17
400-406 MHzOriginal Equipment2020-11-17
699.7-715.3 MHzOriginal Equipment2020-11-17
5180-5240 MHzOriginal Equipment2020-11-17
2402-2480 MHzOriginal Equipment2020-11-17
2402-2480 MHzOriginal Equipment2020-11-17

Exhibits

DocumentTypeAvailableFile
Ex8a User Manual Mackenzie UGUsers Manual2021-01-11PDF 2.3 MB
Ex8a User manual Mackenzie UGUsers Manual2021-01-11PDF 2.3 MB
Ex8b User Manual Energy Exp and Prod SafetyUsers Manual2021-01-11PDF 1.5 MB
Ex8b User Manual Energy Exp and Prod safetyUsers Manual2021-01-11PDF 1.5 MB
Ex8b User manual Energy Exp and Prod SafetyUsers Manual2021-01-11PDF 1.5 MB
Ex.09 Internal PhotosInternal Photos2021-09-20PDF 1.7 MB
Ex.09 Internal PhotosExternal Photos2021-09-20PDF 1.7 MB
Internal PhotosInternal Photos2021-09-20PDF 1.7 MB
Internal PhotosInternal Photos2021-01-12PDF 4.1 MB
Ex09 Internal PhotosInternal Photos2021-01-11PDF 1 MB
Ex03 External PhotosExternal Photos2021-01-11PDF 4.1 MB
Ex03 External photosExternal Photos2021-01-11PDF 4.1 MB
Ex01 LabelID Label/Location Info2020-11-17PDF 437 KB
Ex01 labelID Label/Location Info2020-11-17PDF 437 KB
Test Setup PhotosTest Setup Photos2021-01-12PDF 464.4 KB
Ex07A BT-BTLE-WLAN TsupTest Setup Photos2021-01-11PDF 1.5 MB
Ex07B SAR TsupTest Setup Photos2021-01-11PDF 748.8 KB
Ex07C Pt 96 TsupTest Setup Photos2021-01-11PDF 144.7 KB
Ex07D Pt 96.47 TsupTest Setup Photos2021-01-11PDF 1.3 MB
Ex.06 EMC Report Part 96 Part 1Test Report2021-09-20PDF 3.8 MB
Ex.06 EMC Report Part 96 Part 2Test Report2021-09-20PDF 3.6 MB
TR BTLETest Report2020-12-21PDF 1.3 MB
TR Wifi 2.4GTest Report2020-12-21PDF 1.6 MB
Test ReportTest Report2020-12-21PDF 3.3 MB
Ex6L TR Model B14_pt 1Test Report2020-11-17PDF 5.4 MB
Ex6L TR Model B14_pt 2Test Report2020-11-17PDF 5.1 MB
Ex6O TR Pt96.47_pt 1Test Report2020-11-17PDF 1 MB
Ex6O TR Pt96_pt 1Test Report2020-11-17PDF 5.5 MB
Ex6O TR Pt96_pt 2Test Report2020-11-17PDF 5.5 MB
Ex6O TR Pt96_pt 3Test Report2020-11-17PDF 4.4 MB
Ex6a TX Report_pt 1Test Report2020-11-17PDF 4.6 MB
Ex6a TX Report_pt 2Test Report2020-11-17PDF 4.1 MB
Ex6b TR BTTest Report2020-11-17PDF 3.8 MB
Ex6c TR BTLETest Report2020-11-17PDF 3 MB
Ex6d TR WIFI 2.4_pt 1Test Report2020-11-17PDF 4 MB
Ex6d TR WIFI 2.4_pt 2Test Report2020-11-17PDF 3.7 MB
Ex6e TR DFSTest Report2020-11-17PDF 1,014.5 KB
Ex6e TR Mackenzi UHF WIFI5_pt1-1Test Report2020-11-17PDF 1.6 MB
Ex6e TR Mackenzi UHF WIFI5_pt1-2Test Report2020-11-17PDF 4.7 MB
Ex6e TR WIFI5_pt 2Test Report2020-11-17PDF 5.2 MB
Ex6f TR Model B2_pt 1Test Report2020-11-17PDF 5.1 MB
Ex6f TR Model B2_pt 2Test Report2020-11-17PDF 5.3 MB
Ex6f TR Model B2_pt 3Test Report2020-11-17PDF 5.4 MB
Ex6f TR Model B2_pt 4Test Report2020-11-17PDF 2 MB
Ex6g TR Model B4_pt 1Test Report2020-11-17PDF 5 MB
Ex6g TR Model B4_pt 2Test Report2020-11-17PDF 5.3 MB
Ex6g TR Model B4_pt 3Test Report2020-11-17PDF 5.5 MB
Ex6g TR Model B4_pt 4Test Report2020-11-17PDF 892.2 KB
Ex6h TR Model B5_pt 1Test Report2020-11-17PDF 5 MB
Ex6h TR Model B5_pt 2Test Report2020-11-17PDF 4.9 MB
Ex6i TR Model B7_pt 1Test Report2020-11-17PDF 4.9 MB
Ex6i TR Model B7_pt 2Test Report2020-11-17PDF 5.4 MB
Ex6i TR Model B7_pt 3Test Report2020-11-17PDF 4.2 MB
Ex6j TR Model B12_pt 1Test Report2020-11-17PDF 4.9 MB
Ex6j TR Model B12_pt 2Test Report2020-11-17PDF 4.8 MB
Ex6k TR Model B13_pt 1Test Report2020-11-17PDF 5.3 MB
Ex6k TR Model B13_pt 2Test Report2020-11-17PDF 1.5 MB
Ex6m TR Model B17_pt 1Test Report2020-11-17PDF 5.3 MB
Ex6n TR Model B30_pt 1Test Report2020-11-17PDF 5.2 MB
Ex6n TR Model B30_pt 2Test Report2020-11-17PDF 3.5 MB
Attestation BT_WLAN DecAttestation Statements2022-11-22PDF 133.8 KB
Attestation BT WLAN DeclarationAttestation Statements2020-11-17PDF 160.4 KB
Attestation DFS UNII DeclarationAttestation Statements2020-11-17PDF 265.6 KB
Attestation WLAN Channels&ModeAttestation Statements2020-11-17PDF 82.8 KB
C2PC LetterCover Letter(s)2022-11-22PDF 24.3 KB
Confidentiality LetterCover Letter(s)2022-11-22PDF 102.8 KB
LOA LetterCover Letter(s)2022-11-22PDF 39.6 KB
Statement of CertificationCover Letter(s)2022-11-22PDF 175.3 KB
Authorization LetterCover Letter(s)2021-09-20PDF 39.6 KB
C2PC Cover LetterCover Letter(s)2021-09-20PDF 28.5 KB
Confidentiality RequestCover Letter(s)2021-09-20PDF 90.9 KB
Ex.02 Statement of CertificationCover Letter(s)2021-09-20PDF 110.8 KB
Ex.09 Statement of CertificationCover Letter(s)2021-09-20PDF 110.8 KB
Ex.13a PC2 Cover Letter (Arine) 14SepCover Letter(s)2021-09-20PDF 28.5 KB
Ex.13b Confidentiality LetterCover Letter(s)2021-09-20PDF 90.9 KB
LOA LetterCover Letter(s)2021-09-20PDF 39.6 KB
Statement of CertificationCover Letter(s)2021-09-20PDF 110.8 KB
Confidentiality LetterCover Letter(s)2020-12-21PDF 122.5 KB
Confidentiality Request LetterCover Letter(s)2020-12-21PDF 122.5 KB
Cover LetterCover Letter(s)2020-12-21PDF 110.9 KB
Freq Justification LetterCover Letter(s)2020-12-21PDF 100.1 KB
ST ConfidentialityCover Letter(s)2020-12-21PDF 159.5 KB
Short Term Confidentiality LetterCover Letter(s)2020-12-21PDF 159.5 KB
Statement of CertificationCover Letter(s)2020-12-21PDF 128.6 KB
Ex02 Statement of CertificationCover Letter(s)2020-11-17PDF 128.4 KB
Ex12b Conf LetterCover Letter(s)2020-11-17PDF 115.7 KB
Ex13a Cert of TransmitterCover Letter(s)2020-11-17PDF 106.1 KB
Ex13a Certification of TransmitterCover Letter(s)2020-11-17PDF 106.1 KB
Ex13a Cover Letter Cert of TransmitterCover Letter(s)2020-11-17PDF 106.1 KB
Ex13b Conf LetterCover Letter(s)2020-11-17PDF 115.7 KB
Ex13b Conf letterCover Letter(s)2020-11-17PDF 115.7 KB
Ex13c Freq JustificationCover Letter(s)2020-11-17PDF 100.2 KB
Short Term Conf Req LetterCover Letter(s)2020-11-17PDF 199.2 KB
SAR Report EMERF Exposure Info2022-11-22PDF 602.1 KB
EME Report part 1 of 2RF Exposure Info2021-09-20PDF 1 MB
EME Report part 2 of 2RF Exposure Info2021-09-20PDF 2.4 MB
Ex.11 EME Report Part 1 of 2RF Exposure Info2021-09-20PDF 1 MB
Ex.11 EME Report Part 2 of 2RF Exposure Info2021-09-20PDF 2.4 MB
Ex11 RF Exp 1of2 (LMR)RF Exposure Info2020-11-17PDF 1.1 MB
Ex11 RF Exp 1of2 (LMR).pdfRF Exposure Info2020-11-17PDF 1.1 MB
Ex11 RF Exp 20f2(WLAN andLTE)RF Exposure Info2020-11-17PDF 1.3 MB
Ex11 RF Exp App A ProbeRF Exposure Info2020-11-17PDF 2.6 MB
Ex11 RF Exp App A probRF Exposure Info2020-11-17PDF 2.6 MB
Ex11 RF Exp App A probeRF Exposure Info2020-11-17PDF 2.6 MB
Ex11 RF Exp App B DipoleRF Exposure Info2020-11-17PDF 4.6 MB
Ex11 RF Exp App B dipoleRF Exposure Info2020-11-17PDF 4.6 MB
Ex11 RF Exp App C and D System checkRF Exposure Info2020-11-17PDF 4.5 MB
Ex11 RF Exp App C and D system checkRF Exposure Info2020-11-17PDF 4.5 MB
Ex11 RF Exp NAG Report 1of2 (LMR)RF Exposure Info2020-11-17PDF 1.1 MB
Ex11 RF Exp NAG Report 2of2 (WLANandLTE)RF Exposure Info2020-11-17PDF 1.3 MB
Ex11RF Exp 1of2 Rev B 201027 (LMR)RF Exposure Info2020-11-17PDF 1.1 MB
Ex11_MKz NAG Model Report 1of2 Rev B 201027 (LMR)RF Exposure Info2020-11-17PDF 1.1 MB
Ex11_MKz NAG Model Report 2of2 Rev B 201021 (WLAN and LTE)RF Exposure Info2020-11-17PDF 1.3 MB
Ex11_RF Exp 2of2 (WLAN and LTE)RF Exposure Info2020-11-17PDF 1.3 MB

Application Information

Application IDhOtN9DB1wLVdO/j4Yfl9kA==
Final Action Date2022-11-22
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003778479
Model89FT7133
Frequency Range400-406 MHz
Equipment ClassTNF - Licensed Non-Broadcast Transmitter Held to Face
Device DescriptionBody worn 2-way portable radio
Responsible PartyDeanna Zakharia, Regulatory Compliance Manager, deanna.zakharia@motorolasolutions.com , 9547234707
Test FirmHock Guan Ho, Motorola Penang Advanced Communication Laboratory, hockguan@motorolasolutions.com , 604-2240988
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 3.41 W/kg, 2.99 W/kg, 3.41 W/kg and 3.65 W/kg, respectively. Class II Permissive Change: Adds Mobile Hotspot operation via software.

Applications

Application IDDatePurpose
hOtN9DB1wLVdO/j4Yfl9kA==2022-11-22Class II permissive change or modification of presently authorized equipment
ZVBH0YJMYCs9AY6DhBBzLQ==2022-11-22Class II permissive change or modification of presently authorized equipment
X/sAs6pk3M/1kuM0QcxHlg==2022-11-22Class II permissive change or modification of presently authorized equipment
/kb/KCkes/77XGQ6XqmPSg==2022-11-22Class II permissive change or modification of presently authorized equipment
+CCoAO7h2WVCMkJ0s1O40Q==2022-11-22Class II permissive change or modification of presently authorized equipment
x9GO+4BUW2hXxemGqqfD3g==2021-09-20Class II permissive change or modification of presently authorized equipment
dJlGukRTJ6IXT7gx5G8btA==2021-09-20Class II permissive change or modification of presently authorized equipment
V6q4/5qqX9dOurhwk3/H9w==2021-09-20Class II permissive change or modification of presently authorized equipment
FvOSFNt9SvRPV9lhjR9Hug==2021-09-20Class II permissive change or modification of presently authorized equipment
B4LEc0w0jX6nsYQVjs4s+Q==2021-09-20Class II permissive change or modification of presently authorized equipment
1NdeRsC1vAR1/6a2cmnGuQ==2021-09-20Class II permissive change or modification of presently authorized equipment
zR8i+8stETa1xHAvvWVRGg==2020-12-21Class II permissive change or modification of presently authorized equipment
nmBWtVSZLxXEtyLMCHSEhg==2020-12-21Class II permissive change or modification of presently authorized equipment
fvA+dfOTZzYz5uMZG0pfOw==2020-12-21Class II permissive change or modification of presently authorized equipment
fm0gbk6FX4ev1+vV/MtpCw==2020-12-21Class II permissive change or modification of presently authorized equipment
RGBJm7FRBRIVNmTeq6uftQ==2020-12-21Class II permissive change or modification of presently authorized equipment
BVmeyQLEH98pooUjJRj73Q==2020-12-21Class II permissive change or modification of presently authorized equipment
QOxqVt6kPd/igoEKksUQQw==2020-11-17Original Equipment
FZdUFM6eju14zOIy98ktJg==2020-11-17Original Equipment
EQxaqek3pfOdwI3VP3gLfA==2020-11-17Original Equipment
CsxE39zWXMRDAFAiNiuCPQ==2020-11-17Original Equipment
4DUoXBMMCc1x9ptGaPyc4Q==2020-11-17Original Equipment
2hx5JzqK+Ncl/JdVeB2Opg==2020-11-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
400-406 MHz4.80.5ppm7K60F1D22, 74, 9EF, ES
400-406 MHz4.80.5ppm7K60F1D22H, 74, 9EF, ES
400-406 MHz4.80.5ppm7K60F1W22, 74, 9EF, ES
400-406 MHz4.80.5ppm7K60F1W22H, 74, 9
400-406 MHz4.80.5ppm7K60F1W22H, 74, 9EF, ES
400-406 MHz4.80.5ppm11K0F3E22, 74, 9EF, ES
400-406 MHz4.80.5ppm11K0F3E22H, 74, 9EF, ES
400-406 MHz4.80.5ppm16K0F3E22, 74, 9EF, ES
400-406 MHz4.80.5ppm16K0F3E22H, 74EF, ES
400-406 MHz4.80.5ppm16K0F3E22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm16K0F3E22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm16K0F3E22, 74, 9EF, ES
406.1-512 MHz4.80.5ppm16K0F3E22H, 74EF, ES
406.1-512 MHz4.80.5ppm7K60F1D22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm7K60F1E22, 74, 9EF, ES
406.1-512 MHz4.80.5ppm7K60F1E22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm7K60F1D22, 74, 9EF, ES
406.1-512 MHz4.80.5ppm7K60F1W22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm7K60F1W22, 74, 9EF, ES
406.1-512 MHz4.80.5ppm11K0F3E22H, 74, 9EF, ES
406.1-512 MHz4.80.5ppm11K0F3E22, 74, 9EF, ES
704-711 MHz0.1370.1ppm8M93D7W27
706.5-713.5 MHz0.17030.1ppm4M48G7D27
706.5-713.5 MHz0.13760.1ppm4M47D7W27
709-711 MHz0.16990.1ppm8M93G7D27
709-711 MHz0.14350.1ppm8M91D7W27
779.5-784.5 MHz0.17680.1ppm4M47G7D27
779.5-784.5 MHz0.14550.1ppm4M47D7W27
782 MHz0.17250.1ppm8M91G7D27
782 MHz0.14210.1ppm8M91D7W27
790.5-795.5 MHz0.15440.1ppm4M48D7W9
790.5-795.5 MHz0.1890.1ppm4M47G7D9
793 MHz0.18510.1ppm8M91G7D9
793 MHz0.15190.1ppm8M93D7W9
824.7-849.3 MHz0.13950.1ppm1M07D7W22H
825.5-847.5 MHz0.17360.1ppm2M68G7D22H
829-844 MHz0.17140.1ppm8M95G7D22H

Grants

TCB Grant - Application ZVBH0YJMYCs9AY6DhBBzLQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/22/2022

Application Dated: 11/21/2022
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 0.23 W/kg, 0.31 W/kg, 0.31 W/kg and 3.65 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: Adds Mobile Hotspot operation via software.


EAS Grant - Application ZVBH0YJMYCs9AY6DhBBzLQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/22/2022

Application Dated: 11/21/2022
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 0.23 W/kg, 0.31 W/kg, 0.31 W/kg and 3.65 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: Adds Mobile Hotspot operation via software.



TCB Grant - Application zR8i+8stETa1xHAvvWVRGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.05075 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zR8i+8stETa1xHAvvWVRGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.05075 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application x9GO+4BUW2hXxemGqqfD3g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/20/2021

Application Dated: 09/15/2021
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


EAS Grant - Application x9GO+4BUW2hXxemGqqfD3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/20/2021

Application Dated: 09/15/2021
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.



TCB Grant - Application X/sAs6pk3M/1kuM0QcxHlg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/22/2022

Application Dated: 11/21/2022
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.0575 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg and 3.65 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.

Class II Permissive Change: Adds Mobile Hotspot operation via software.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application X/sAs6pk3M/1kuM0QcxHlg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/22/2022

Application Dated: 11/21/2022
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.0575 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg and 3.65 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.

Class II Permissive Change: Adds Mobile Hotspot operation via software.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application V6q4/5qqX9dOurhwk3/H9w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/20/2021

Application Dated: 09/15/2021
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838  
CC 15E 5260.0  -  5320.0 0.03654  
CC 15E 5500.0  -  5720.0 0.05814  
CC 15E 5745.0  -  5825.0 0.05318  

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application V6q4/5qqX9dOurhwk3/H9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/20/2021

Application Dated: 09/15/2021
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838  
CC 15E 5260.0  -  5320.0 0.03654  
CC 15E 5500.0  -  5720.0 0.05814  
CC 15E 5745.0  -  5825.0 0.05318  

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application RGBJm7FRBRIVNmTeq6uftQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg, C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application RGBJm7FRBRIVNmTeq6uftQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg, C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application QOxqVt6kPd/igoEKksUQQw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Citizens Band End User Devices
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP 96 3552.5  -  3697.5 0.1774 0.1  PM 4M52G7D
EP 96 3555.0  -  3695.0 0.1791 0.1  PM 9M09G7D
EP 96 3557.5  -  3692.5 0.1791 0.1  PM 13M5G7D
EP 96 3560.0  -  3690.0 0.1786 0.1  PM 18M5G7D
EP 96 3552.5  -  3697.5 0.1489 0.1  PM 4M51W7D
EP 96 3555.0  -  3695.0 0.1503 0.1  PM 9M03W7D
EP 96 3557.5  -  3692.5 0.1521 0.1  PM 13M5W7D
EP 96 3560.0  -  3690.0 0.1507 0.1  PM 18M6W7D

Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.

EP: Output power is Effective Isotropic Radiated Power (EIRP)

EAS Grant - Application QOxqVt6kPd/igoEKksUQQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Citizens Band End User Devices
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP 96 3552.5  -  3697.5 0.1774 0.1  PM 4M52G7D
EP 96 3555.0  -  3695.0 0.1791 0.1  PM 9M09G7D
EP 96 3557.5  -  3692.5 0.1791 0.1  PM 13M5G7D
EP 96 3560.0  -  3690.0 0.1786 0.1  PM 18M5G7D
EP 96 3552.5  -  3697.5 0.1489 0.1  PM 4M51W7D
EP 96 3555.0  -  3695.0 0.1503 0.1  PM 9M03W7D
EP 96 3557.5  -  3692.5 0.1521 0.1  PM 13M5W7D
EP 96 3560.0  -  3690.0 0.1507 0.1  PM 18M6W7D

Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.


EP: Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application nmBWtVSZLxXEtyLMCHSEhg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Citizens Band End User Devices
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP 96 3552.5  -  3697.5 0.1774 0.1  PM 4M52G7D
EP 96 3555.0  -  3695.0 0.1791 0.1  PM 9M09G7D
EP 96 3557.5  -  3692.5 0.1791 0.1  PM 13M5G7D
EP 96 3560.0  -  3690.0 0.1786 0.1  PM 18M5G7D
EP 96 3552.5  -  3697.5 0.1489 0.1  PM 4M51W7D
EP 96 3555.0  -  3695.0 0.1503 0.1  PM 9M03W7D
EP 96 3557.5  -  3692.5 0.1521 0.1  PM 13M5W7D
EP 96 3560.0  -  3690.0 0.1507 0.1  PM 18M6W7D

Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

EP: Output power is Effective Isotropic Radiated Power (EIRP)

EAS Grant - Application nmBWtVSZLxXEtyLMCHSEhg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Citizens Band End User Devices
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EP 96 3552.5  -  3697.5 0.1774 0.1  PM 4M52G7D
EP 96 3555.0  -  3695.0 0.1791 0.1  PM 9M09G7D
EP 96 3557.5  -  3692.5 0.1791 0.1  PM 13M5G7D
EP 96 3560.0  -  3690.0 0.1786 0.1  PM 18M5G7D
EP 96 3552.5  -  3697.5 0.1489 0.1  PM 4M51W7D
EP 96 3555.0  -  3695.0 0.1503 0.1  PM 9M03W7D
EP 96 3557.5  -  3692.5 0.1521 0.1  PM 13M5W7D
EP 96 3560.0  -  3690.0 0.1507 0.1  PM 18M6W7D

Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


EP: Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application hOtN9DB1wLVdO/j4Yfl9kA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/22/2022

Application Dated: 11/21/2022
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1D
74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 74, 22H 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 74, 22H 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 3.41 W/kg, 2.99 W/kg, 3.41 W/kg and 3.65 W/kg, respectively.

Class II Permissive Change: Adds Mobile Hotspot operation via software.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application hOtN9DB1wLVdO/j4Yfl9kA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/22/2022

Application Dated: 11/21/2022
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1D
74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 74, 22H 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 74, 22H 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 3.41 W/kg, 2.99 W/kg, 3.41 W/kg and 3.65 W/kg, respectively.

Class II Permissive Change: Adds Mobile Hotspot operation via software.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application FZdUFM6eju14zOIy98ktJg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg,

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application FZdUFM6eju14zOIy98ktJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 22, 74, 90 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg,


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application FvOSFNt9SvRPV9lhjR9Hug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/20/2021

Application Dated: 09/15/2021
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application FvOSFNt9SvRPV9lhjR9Hug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/20/2021

Application Dated: 09/15/2021
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Transmitter Held to Face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1D
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 11K0F3E
EF ES 74, 90, 22H 400.0  -  406.0 4.8 0.5  PM 16K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 7K60F1W
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 11K0F3E
EF ES 74, 90, 22H 406.1  -  512.0 4.8 0.5  PM 16K0F3E

Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

TCB Grant - Application fvA+dfOTZzYz5uMZG0pfOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
EP 24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
EP 24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
EP 24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
EP 24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
EP 27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
EP 27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
EP 27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
EP 27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
EP 27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
EP 27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
EP 27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
EP 27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
EP 27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
EP 27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

EP: Output power is Effective Isotropic Radiated Power (EIRP)

EAS Grant - Application fvA+dfOTZzYz5uMZG0pfOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
EP 24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
EP 24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
EP 24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
EP 24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
EP 27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
EP 27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
EP 27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
EP 27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
EP 27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
EP 27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
EP 27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
EP 27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
EP 27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
EP 27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


EP: Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application fm0gbk6FX4ev1+vV/MtpCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838 10.0  PM
CC 15E 5260.0  -  5320.0 0.03654 10.0  PM
CC 15E 5500.0  -  5720.0 0.05814 10.0  PM
CC 15E 5745.0  -  5825.0 0.05318 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fm0gbk6FX4ev1+vV/MtpCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838 10.0  PM
CC 15E 5260.0  -  5320.0 0.03654 10.0  PM
CC 15E 5500.0  -  5720.0 0.05814 10.0  PM
CC 15E 5745.0  -  5825.0 0.05318 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EQxaqek3pfOdwI3VP3gLfA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
EP 24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
EP 24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
EP 24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
EP 24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
EP 27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
EP 27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
EP 27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
EP 27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
EP 27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
EP 27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
EP 27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
EP 27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
EP 27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
EP 27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

EP: Output power is Effective Isotropic Radiated Power (EIRP)

EAS Grant - Application EQxaqek3pfOdwI3VP3gLfA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: PCS Licensed Transmitter held to face
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 700.5  -  714.5 0.1751 0.1  PM 2M68G7D
27 704.0  -  711.0 0.1682 0.1  PM 8M91G7D
27 699.7  -  715.3 0.1461 0.1  PM 1M08D7W
27 704.0  -  711.0 0.137 0.1  PM 8M93D7W
27 779.5  -  784.5 0.1768 0.1  PM 4M47G7D
27 782.0  -  782.0 0.1725 0.1  PM 8M91G7D
27 779.5  -  784.5 0.1455 0.1  PM 4M47D7W
27 782.0  -  782.0 0.1421 0.1  PM 8M91D7W
90 790.5  -  795.5 0.189 0.1  PM 4M47G7D
90 793.0  -  793.0 0.1851 0.1  PM 8M91G7D
90 790.5  -  795.5 0.1544 0.1  PM 4M48D7W
90 793.0  -  793.0 0.1519 0.1  PM 8M93D7W
27 706.5  -  713.5 0.1703 0.1  PM 4M48G7D
27 709.0  -  711.0 0.1699 0.1  PM 8M93G7D
27 706.5  -  713.5 0.1376 0.1  PM 4M47D7W
27 709.0  -  711.0 0.1435 0.1  PM 8M91D7W
EP 24E 1855.0  -  1905.0 0.499 0.1  PM 8M93G7D
EP 24E 1860.0  -  1900.0 0.487 0.1  PM 17M8G7D
EP 24E 1855.0  -  1905.0 0.429 0.1  PM 8M93D7W
EP 24E 1860.0  -  1900.0 0.427 0.1  PM 17M9D7W
EP 27 1711.5  -  1753.5 0.439 0.1  PM 2M68G7D
EP 27 1720.0  -  1745.0 0.416 0.1  PM 17M8G7D
EP 27 1720.0  -  1745.0 0.366 0.1  PM 17M8D7W
22H 825.5  -  847.5 0.1736 0.1  PM 2M68G7D
22H 829.0  -  844.0 0.1714 0.1  PM 8M95G7D
22H 824.7  -  849.3 0.1395 0.1  PM 1M07D7W
22H 829.0  -  844.0 0.1377 0.1  PM 8M95D7W
EP 27 2502.5  -  2567.5 0.372 0.1  PM 4M48G7D
EP 27 2510.0  -  2560.0 0.343 0.1  PM 17M9G7D
EP 27 2510.0  -  2560.0 0.314 0.1  PM 17M9D7W
EP 27 2307.5  -  2312.5 0.37 0.1  PM 4M47G7D
EP 27 2310.0  -  2310.0 0.363 0.1  PM 8M91G7D
EP 27 2307.5  -  2312.5 0.3 0.1  PM 4M48D7W
EP 27 2310.0  -  2310.0 0.298 0.1  PM 8M95D7W

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.


EP: Output power is Effective Isotropic Radiated Power (EIRP)

TCB Grant - Application dJlGukRTJ6IXT7gx5G8btA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/20/2021

Application Dated: 09/15/2021
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466  

Output Power listed is conducted. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application dJlGukRTJ6IXT7gx5G8btA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/20/2021

Application Dated: 09/15/2021
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466  

Output Power listed is conducted. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CsxE39zWXMRDAFAiNiuCPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838 10.0  PM
CC 15E 5260.0  -  5320.0 0.03654 10.0  PM
CC 15E 5500.0  -  5720.0 0.05814 10.0  PM
CC 15E 5745.0  -  5825.0 0.05318 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CsxE39zWXMRDAFAiNiuCPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03838 10.0  PM
CC 15E 5260.0  -  5320.0 0.03654 10.0  PM
CC 15E 5500.0  -  5720.0 0.05814 10.0  PM
CC 15E 5745.0  -  5825.0 0.05318 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application BVmeyQLEH98pooUjJRj73Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2020

Application Dated: 12/18/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466 10.0  PM

Output Power listed is conducted. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BVmeyQLEH98pooUjJRj73Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 12/21/2020

Application Dated: 12/18/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466 10.0  PM

Output Power listed is conducted. C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application B4LEc0w0jX6nsYQVjs4s+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/20/2021

Application Dated: 09/15/2021
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431  
CC 15C 2412.0  -  2462.0 0.0575  

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application B4LEc0w0jX6nsYQVjs4s+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 09/20/2021

Application Dated: 09/15/2021
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431  
CC 15C 2412.0  -  2462.0 0.0575  

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.

Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4DUoXBMMCc1x9ptGaPyc4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466 10.0  PM

Output Power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4DUoXBMMCc1x9ptGaPyc4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00466 10.0  PM

Output Power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 2hx5JzqK+Ncl/JdVeB2Opg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/17/2020

Application Dated: 11/16/2020
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.05075 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2hx5JzqK+Ncl/JdVeB2Opg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 11/17/2020

Application Dated: 11/16/2020
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ489FT7133
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Digital Transmission System
Notes: Body worn 2-way portable radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00431 10.0  PM
CC 15C 2412.0  -  2462.0 0.05075 10.0  PM

Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: