FCC ID AZ492FT1627

MOBILE TRANSMITTER

by Motorola Solutions, Inc.

Grantee Code: AZ4   Product Code: 92FT1627
Latest application date: 2008-02-04

FCC ID Device Details

FCC IDAZ492FT1627
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeAZ4
Product Code92FT1627
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassMOBILE TRANSMITTER
Test FirmMotorola

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
29.7-36 MHzClass II permissive change or modification of presently authorized equipment2008-02-04
29.7-36 MHzOriginal Equipment2000-08-31

Exhibits

DocumentTypeAvailableFile
Antenna Installation InstructionsUsers Manual2000-08-31PDF 845 KB
Installation ManualUsers Manual2000-08-31PDF 669 KB
Users ManualUsers Manual2000-08-31PDF 755.4 KB
users Manual (revised)Users Manual2000-08-31PDF 834.3 KB
Internal photosInternal Photos2000-08-31PDF 349.7 KB
External PhotosExternal Photos2000-08-31PDF 354.4 KB
ID label Info and Gen InfoID Label/Location Info2000-08-31PDF 21.8 KB
Circuit DescriptionsBlock Diagram2000-08-31PDF 10.3 KB
Schematic DiagramsSchematics2000-08-31PDF 271 KB
Operational DescriptionOperational Description2000-08-31PDF 18.4 KB
Test Set up ProceduresTest Setup Photos2000-08-31PDF 22.4 KB
TEST REPORTTest Report2008-02-04PDF 49.9 KB
Test ReportTest Report2000-08-31PDF 1.2 MB
Certification of DataAttestation Statements2000-08-31PDF 6.2 KB
COVER LETTERCover Letter(s)2008-02-04PDF 29.7 KB
Cover LetterCover Letter(s)2000-08-31PDF 6.9 KB
Replace letter for corres14727RF Exposure Info2000-08-31PDF 7.2 KB
Low Band Mobile Unit Antenna ReportRF Exposure Info2000-08-31PDF 457.1 KB
Parts List and Tue up infoParts List/Tune Up Info2000-08-31PDF 61.8 KB
RF Exposure InfoRF Exposure Info2000-08-31PDF 5.6 KB
RF Exposure ReportRF Exposure Info2000-08-31PDF 5 MB
RF Exposure Report Control vs UncontrolledRF Exposure Info2000-08-31PDF 580.4 KB
Response to corres 13324RF Exposure Info2000-08-31PDF 49 KB
Response to corres number 14727 (replaced as requested by applicant) Metadata onlyRF Exposure Info2000-08-31PDF 9.3 KB
Response to correspondence 15361RF Exposure Info2000-08-31PDF 10.2 KB

Application Information

Application IDZFwSb9+BwLL4cwrgga9Ofg==
Final Action Date2008-02-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003778479
Model92FT1627
Frequency Range29.7-36 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionMOBILE TRANSMITTER
Responsible PartyKim Uong, Regulatory Compliance Engineer, EKU001@motorolasolutions.com , 9547235422
Test FirmWilliam Elliott, Motorola, FME001@motorolasolutions.com , 954-723-5480
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsRF exposure compliance was determined in vehicle-mount antenna configurations with respect to controlled MPE limit for vehicle occupants and uncontrolled SAR limit for bystanders at an equivalent separation distance of 3 feet from a 0 dBd base-loaded quarter-wave antenna. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. Qualified end-users of this device must have the knowledge to control the exposure conditions of bystanders to ensure a minimum separation distance of 3 feet is maintained between the antenna and persons outside of the vehicle for satisfying RF exposure compliance. For other fixed-mounted operations, the antenna must be installed to provide a separation distance of at least 3 feet from persons to ensure compliance. End-users must be provide with specific instructions for meeting Occupational/Controlled Exposure Environment requirements. The highest reported SAR value at 3 feet from the antenna is 0.02 W/kg. Class 2 permissive change.

Applications

Application IDDatePurpose
ZFwSb9+BwLL4cwrgga9Ofg==2008-02-04Class II permissive change or modification of presently authorized equipment
bjSP59/MXLLptrotWxa+LQ==2000-08-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
29.7-36 MHz725ppm16K0F3E22, 9BN
29.7-36 MHz725ppm16K0F2D22, 9
29.7-36 MHz725ppm16K0F2D22, 9BN

Grants

TCB Grant - Application ZFwSb9+BwLL4cwrgga9Ofg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/04/2008

Application Dated: 02/04/2008
Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
 
Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ492FT1627
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBILE TRANSMITTER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F3E
BN 22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F2D

RF exposure compliance was determined in vehicle-mount antenna configurations with respect to controlled MPE limit for vehicle occupants and uncontrolled SAR limit for bystanders at an equivalent separation distance of 3 feet from a 0 dBd base-loaded quarter-wave antenna. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. Qualified end-users of this device must have the knowledge to control the exposure conditions of bystanders to ensure a minimum separation distance of 3 feet is maintained between the antenna and persons outside of the vehicle for satisfying RF exposure compliance. For other fixed-mounted operations, the antenna must be installed to provide a separation distance of at least 3 feet from persons to ensure compliance. End-users must be provide with specific instructions for meeting Occupational/Controlled Exposure Environment requirements. The highest reported SAR value at 3 feet from the antenna is 0.02 W/kg.

Class 2 permissive change.


BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

EAS Grant - Application ZFwSb9+BwLL4cwrgga9Ofg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 02/04/2008

Application Dated: 02/04/2008
 
Attention: Kim Uong , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ492FT1627
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MOBILE TRANSMITTER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F3E
BN 22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F2D

RF exposure compliance was determined in vehicle-mount antenna configurations with respect to controlled MPE limit for vehicle occupants and uncontrolled SAR limit for bystanders at an equivalent separation distance of 3 feet from a 0 dBd base-loaded quarter-wave antenna. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. Qualified end-users of this device must have the knowledge to control the exposure conditions of bystanders to ensure a minimum separation distance of 3 feet is maintained between the antenna and persons outside of the vehicle for satisfying RF exposure compliance. For other fixed-mounted operations, the antenna must be installed to provide a separation distance of at least 3 feet from persons to ensure compliance. End-users must be provide with specific instructions for meeting Occupational/Controlled Exposure Environment requirements. The highest reported SAR value at 3 feet from the antenna is 0.02 W/kg.

Class 2 permissive change.


BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

TCB Grant - Application bjSP59/MXLLptrotWxa+LQ==

This application does not exist.

EAS Grant - Application bjSP59/MXLLptrotWxa+LQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
8000 West Sunrise Blvd
Ft Lauderdale, FL 33322
United States
  Date of Grant: 08/31/2000

Application Dated: 03/24/2000
 
Attention: Deanna Zakharia , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  AZ492FT1627
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mobile Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F3E
22, 90 29.7  -  36.0 72.0 5.0  PM 16K0F2D

RF exposure compliance was determined in vehicle-mount antenna configurations with respect to controlled MPE limit for vehicle occupants and uncontrolled SAR limit for bystanders at an equivalent separation distance of 3 feet from a 0 dBd base-loaded quarter-wave antenna. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. Qualified end-users of this device must have the knowledge to control the exposure conditions of bystanders to ensure a minimum separation distance of 3 feet is maintained between the antenna and persons outside of the vehicle for satisfying RF exposure compliance. For other fixed-mounted operations, the antenna must be installed to provide a separation distance of at least 3 feet from persons to ensure compliance. End-users must be provide with specific instructions for meeting Occupational/Controlled Exposure Environment requirements. The highest reported SAR value at 3 feet from the antenna is 0.02 W/kg.


BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

Mail To: