FCC ID AZP-FDQ02T
Wireless Modem with Serial Interface
by Futaba Corporation
Grantee Code: AZP Product Code: FDQ02T
Latest application date: 2008-11-25
FCC ID Device Details
| FCC ID | AZP-FDQ02T |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AZP |
| Product Code | FDQ02T |
| Applicant Business | Futaba Corporation 🇯🇵 |
| Related Domains |  ml.futaba.co.jp |
| Equipment Class | Wireless Modem with Serial Interface |
| Test Firm | Audix Technology Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405.376-2448.384 MHz | Class II permissive change or modification of presently authorized equipment | 2008-11-25 |
| 2405.376-2448.384 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-17 |
| 2405.376-2448.384 MHz | Original Equipment | 2006-05-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2006-05-22 | PDF 406 KB |
| Internal photos | Internal Photos | 2008-11-25 | PDF 333.2 KB |
| Internal Photos | Internal Photos | 2007-05-17 | PDF 189.8 KB |
| Internal Photos | Internal Photos | 2006-05-22 | PDF 1.9 MB |
| External photos | External Photos | 2008-11-25 | PDF 148.9 KB |
| External Photos | External Photos | 2007-05-17 | PDF 142.9 KB |
| External Photos | External Photos | 2006-05-22 | PDF 636.4 KB |
| ID Label | ID Label/Location Info | 2006-05-22 | PDF 213.2 KB |
| Test setup photos | Test Setup Photos | 2008-11-25 | PDF 111.6 KB |
| Test Setup Photos | Test Setup Photos | 2007-05-17 | PDF 165.5 KB |
| Test Setup Photos | Test Setup Photos | 2006-05-22 | PDF 1.2 MB |
| Test Report | Test Report | 2007-05-17 | PDF 1.1 MB |
| Test Report | Test Report | 2006-05-22 | PDF 1.8 MB |
| Agent authorization letter | Cover Letter(s) | 2008-11-25 | PDF 53.5 KB |
| Class II permissive change request letter | Cover Letter(s) | 2008-11-25 | PDF 31.4 KB |
| Confidentiality request letter | Cover Letter(s) | 2008-11-25 | PDF 21.9 KB |
| Authorization letter | Cover Letter(s) | 2007-05-17 | PDF 94.9 KB |
| Class II permissive change letter | Cover Letter(s) | 2007-05-17 | PDF 37.8 KB |
| Request for confidentiality letter | Cover Letter(s) | 2007-05-17 | PDF 32.2 KB |
| Authorization Letter | Cover Letter(s) | 2006-05-22 | PDF 86.2 KB |
| Declaration of Compliance | Cover Letter(s) | 2006-05-22 | PDF 31.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2006-05-22 | PDF 56.2 KB |
| Request for Confidentiality | Cover Letter(s) | 2006-05-22 | PDF 36.4 KB |
| Antenna specification | Parts List/Tune Up Info | 2008-11-25 | PDF 1.3 MB |
| Antenna | Parts List/Tune Up Info | 2006-05-22 | PDF 260.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 54.1 KB | |
| Schematics Metadata only | Schematics | PDF 292.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 205.4 KB |
Application Information
| Application ID | oJbi+8PjgRBjNEWs3AOADw== |
|---|---|
| Final Action Date | 2008-11-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018628057 |
| Model | -FDQ02T |
| Frequency Range | 2405.376-2448.384 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Modem with Serial Interface |
| Responsible Party | Satoshi Inokoshi, General Manager, inokoshi@ml.futaba.co.jp , +81 (475) 32-6019 |
| Test Firm | Leon Liu, Audix Technology Corporation, allen_wang@audixtech.com  , 886-2-2600-99301 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| oJbi+8PjgRBjNEWs3AOADw== | 2008-11-25 | Class II permissive change or modification of presently authorized equipment |
| mWxuTPm9jW84qPj3qpSp+Q== | 2007-05-17 | Class II permissive change or modification of presently authorized equipment |
| NvzU/+8qfFNeIglQ67a52w== | 2006-05-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405.376-2448.384 MHz | 0.0607000 | 15C |
Grants
TCB Grant - Application oJbi+8PjgRBjNEWs3AOADw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/25/2008 Application Dated: 11/25/2008 |
| Futaba Corporation |
| 1080 Yabutsuka,chosei-mura |
| chosei-gun, Chiba-ken, 299-4395 Japan |
| Attention: Satoshi Inokoshi , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Class II permissive change filing. Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
EAS Grant - Application oJbi+8PjgRBjNEWs3AOADw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Futaba Corporation 1080 Yabutsuka,chosei-mura chosei-gun, Chiba-ken, 299-4395 Japan |
Date of Grant: 11/25/2008 Application Dated: 11/25/2008 |
| Attention: Satoshi Inokoshi , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Class II permissive change filing. Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/22/2006 Application Dated: 05/22/2006 |
| Futaba Corporation |
| 1080 Yabutsuka,chosei-mura |
| chosei-gun, Chiba-ken, 299-4395 Japan |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.
|
EAS Grant - Application NvzU/+8qfFNeIglQ67a52w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Futaba Corporation 1080 Yabutsuka,chosei-mura chosei-gun, Chiba-ken, 299-4395 Japan |
Date of Grant: 05/22/2006 Application Dated: 05/22/2006 |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 05/17/2007 Application Dated: 05/17/2007 |
| Futaba Corporation |
| 1080 Yabutsuka,chosei-mura |
| chosei-gun, Chiba-ken, 299-4395 Japan |
| Attention: Satoshi Inokoshi , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Class II permissive change filing. Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied. |
EAS Grant - Application mWxuTPm9jW84qPj3qpSp+Q==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Futaba Corporation 1080 Yabutsuka,chosei-mura chosei-gun, Chiba-ken, 299-4395 Japan | Date of Grant: 05/17/2007 Application Dated: 05/17/2007 |
| Attention: Satoshi Inokoshi , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FDQ02T |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Modem with Serial Interface |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.376 - 2448.384 | 0.0607 |
| Class II permissive change filing. Modular Approval. Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Section 15.107/15.109 complies with Class A limits. Marketing restriction per section 15.3(h) applied.
|
| Mail To: |
| EA441705 |