FCC ID AZP-FRH-SD07TU
RF Modem using digital modulation
by Futaba Corporation
Grantee Code: AZP Product Code: FRHSD07TU
Latest application date: 2005-04-19
FCC ID Device Details
| FCC ID | AZP-FRH-SD07TU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | AZP |
| Product Code | FRHSD07TU |
| Applicant Business | Futaba Corporation 🇯🇵 |
| Related Domains |  ml.futaba.co.jp |
| Equipment Class | RF Modem using digital modulation |
| Test Firm | Audix Technology Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2420-2473 MHz | Class II permissive change or modification of presently authorized equipment | 2005-04-19 |
| 2420-2473 MHz | Original Equipment | 2002-06-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2005-04-19 | PDF 2.4 MB |
| RF exposure info in manual | RF Exposure Info | 2002-06-18 | PDF 64.7 KB |
| Users Manual | Users Manual | 2002-06-18 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2002-06-18 | PDF 427.5 KB |
| External Photos | External Photos | 2002-06-18 | PDF 223.9 KB |
| ID Label | ID Label/Location Info | 2002-06-18 | PDF 117 KB |
| Test Setup Photos | Test Setup Photos | 2005-04-19 | PDF 2.8 MB |
| Setup Photos | Test Setup Photos | 2002-06-18 | PDF 468.7 KB |
| Test Report | Test Report | 2005-04-19 | PDF 4 MB |
| Test Report | Test Report | 2002-06-18 | PDF 1.7 MB |
| Antenna connector description | Attestation Statements | 2002-06-18 | PDF 214.1 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2005-04-19 | PDF 35.9 KB |
| TCB Q and A | Cover Letter(s) | 2005-04-19 | PDF 17 KB |
| Modular Approval | Cover Letter(s) | 2002-06-18 | PDF 62.7 KB |
| Request for Confidentiality | Cover Letter(s) | 2002-06-18 | PDF 13.7 KB |
| Antenna Specification | Parts List/Tune Up Info | 2005-04-19 | PDF 1.7 MB |
| Block Diagram Metadata only | Block Diagram | PDF 58.5 KB | |
| Schematics Metadata only | Schematics | PDF 204.2 KB | |
| Technical Description Metadata only | Operational Description | PDF 10.6 KB |
Application Information
| Application ID | mAowCZV/Y16HyCiqGwrr3g== |
|---|---|
| Final Action Date | 2005-04-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018628057 |
| Model | FRH-SD07TU |
| Frequency Range | 2420-2473 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF Modem using digital modulation |
| Responsible Party | Toshikazu Hama, Manager, Hama@ml.futaba.co.jp , +81-475-30-1061 |
| Test Firm | Jeff Chen, Audix Technology Corporation, leon@audixtech.com  , 886-2-26092133 |
| TCB Email | MKUO@CCSEMC.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Limited modular approval. The device must only be installed in mobile devices as indicated in the Certification filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mAowCZV/Y16HyCiqGwrr3g== | 2005-04-19 | Class II permissive change or modification of presently authorized equipment |
| WgKogvQ3NxYUOqKsR1QCWg== | 2002-06-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2420-2473 MHz | 0.0050000 | 15C |
Grants
TCB Grant - Application WgKogvQ3NxYUOqKsR1QCWg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/18/2002 Application Dated: 06/18/2002 |
| Futaba Corporation |
| 1080 Yabutsuka,chosei-mura |
| chosei-gun, Chiba-ken, 299-4395 Japan |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FRH-SD07TU |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Modem using digital modulation |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2420.0 - 2473.0 | 0.005 |
| Limited modular approval. The device must only be installed in mobile devices as indicated in the Certification filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application WgKogvQ3NxYUOqKsR1QCWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Futaba Corporation 1080 Yabutsuka,chosei-mura chosei-gun, Chiba-ken, 299-4395 Japan |
Date of Grant: 06/18/2002 Application Dated: 06/18/2002 |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FRH-SD07TU |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Modem using digital modulation |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2420.0 - 2473.0 | 0.005 |
| Limited modular approval. The device must only be installed in mobile devices as indicated in the Certification filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/19/2005 Application Dated: 04/19/2005 |
| Futaba Corporation |
| 1080 Yabutsuka,chosei-mura |
| chosei-gun, Chiba-ken, 299-4395 Japan |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FRH-SD07TU |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Modem using digital modulation |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2420.0 - 2473.0 | 0.005 |
| Class II permissive change filing. Limited modular approval. The device must only be installed in mobile devices as indicated in the Certification filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application mAowCZV/Y16HyCiqGwrr3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Futaba Corporation 1080 Yabutsuka,chosei-mura chosei-gun, Chiba-ken, 299-4395 Japan |
Date of Grant: 04/19/2005 Application Dated: 04/19/2005 |
| Attention: Toshikazu Hama , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AZP-FRH-SD07TU |
| Name of Grantee: | Futaba Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Modem using digital modulation |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2420.0 - 2473.0 | 0.005 |
| Class II permissive change filing. Limited modular approval. The device must only be installed in mobile devices as indicated in the Certification filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |