FCC ID B3QT99H209
IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module
by Brother Industries, Ltd.
Grantee Code: B3Q Product Code: T99H209
Latest application date: 2025-11-17
FCC ID Device Details
| FCC ID | B3QT99H209 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | B3Q |
| Product Code | T99H209 |
| Applicant Business | Brother Industries, Ltd. 🇯🇵 |
| Related Domains |  brother.co.jp |
| Equipment Class | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Test Firm | UL Japan, Inc.(Ise) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-17 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-11-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 5180-5240 MHz | Original Equipment | 2021-03-15 |
| 2402-2480 MHz | Original Equipment | 2021-03-15 |
| 2402-2480 MHz | Original Equipment | 2021-03-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual rev | Users Manual | 2021-07-13 | PDF 2.3 MB |
| Users manual rev | Users Manual | 2021-07-13 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2022-03-07 | PDF 3.9 MB |
| Internal photos | Internal Photos | 2022-03-07 | PDF 3.9 MB |
| Internal photos | Internal Photos | 2021-07-13 | PDF 1.5 MB |
| External Photos | External Photos | 2022-03-07 | PDF 3.5 MB |
| External photos | External Photos | 2022-03-07 | PDF 3.5 MB |
| External photos | External Photos | 2021-07-13 | PDF 1.2 MB |
| Label Sample and Label Location | ID Label/Location Info | 2021-03-15 | PDF 3.2 MB |
| Label sample and label location | ID Label/Location Info | 2021-03-15 | PDF 3.2 MB |
| 03 FCC SAR Test Setup Photo | Test Setup Photos | 2025-11-17 | PDF 510.4 KB |
| Test setup photos | Test Setup Photos | 2022-03-07 | PDF 383.4 KB |
| Test setup photos | Test Setup Photos | 2021-07-13 | PDF 383 KB |
| Test setup photos (DFS) | Test Setup Photos | 2021-07-13 | PDF 121.3 KB |
| Test Report (Co-located) | Test Report | 2022-03-07 | PDF 1,021 KB |
| Test Report (DSS) | Test Report | 2022-03-07 | PDF 927 KB |
| Test Report (DTS-BTLE) | Test Report | 2022-03-07 | PDF 916.1 KB |
| Test Report (NII) rev | Test Report | 2022-03-07 | PDF 3.6 MB |
| Test report (DTS-WLAN) | Test Report | 2022-03-07 | PDF 896 KB |
| Test Report (Co-located)_rev | Test Report | 2021-03-15 | PDF 941.1 KB |
| Test Report (DFS) rev | Test Report | 2021-03-15 | PDF 577.2 KB |
| Test Report (DTS-BT LE) rev | Test Report | 2021-03-15 | PDF 1.2 MB |
| Test Report (DTS-WLAN) | Test Report | 2021-03-15 | PDF 2.1 MB |
| Test report (DSS-BT EDR) rev | Test Report | 2021-03-15 | PDF 1.6 MB |
| Test report (NII) rev | Test Report | 2021-03-15 | PDF 3.5 MB |
| Test report (co-located) rev | Test Report | 2021-03-15 | PDF 941.1 KB |
| 01 FCC 2.911(d)(5) Attestation | Attestation Statements | 2025-11-17 | PDF 474.9 KB |
| 01 FCC Agent Attestation_Agent | Attestation Statements | 2025-11-17 | PDF 252.3 KB |
| 01 FCC Agent Attestation_Applicant | Attestation Statements | 2025-11-17 | PDF 503.3 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2021-03-15 | PDF 204.5 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2021-03-15 | PDF 578.1 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2025-11-17 | PDF 410.9 KB |
| 02 FCC C2PC Letter | Cover Letter(s) | 2025-11-17 | PDF 463.3 KB |
| 02 FCC MA Letter | Cover Letter(s) | 2025-11-17 | PDF 597.4 KB |
| 02 FCC Request for LTC | Cover Letter(s) | 2025-11-17 | PDF 384.7 KB |
| Confidentiality Request | Cover Letter(s) | 2022-03-07 | PDF 201 KB |
| Confidentiality request | Cover Letter(s) | 2022-03-07 | PDF 201 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2022-03-07 | PDF 182.9 KB |
| Cover Letter (Contact Authorization) | Cover Letter(s) | 2022-03-07 | PDF 319.9 KB |
| Cover Letter (Description of Change) rev | Cover Letter(s) | 2022-03-07 | PDF 96.5 KB |
| Agent Authorization | Cover Letter(s) | 2021-03-15 | PDF 261.5 KB |
| Agent authorization | Cover Letter(s) | 2021-03-15 | PDF 261.5 KB |
| Confidentiality request (Long term) rev | Cover Letter(s) | 2021-03-15 | PDF 257.7 KB |
| Confidentiality request (Short term) | Cover Letter(s) | 2021-03-15 | PDF 225.4 KB |
| Modular Approval Request | Cover Letter(s) | 2021-03-15 | PDF 150.2 KB |
| 03 FCC SAR Report_Part1 | RF Exposure Info | 2025-11-17 | PDF 4.5 MB |
| 03 FCC SAR Report_Part2 | RF Exposure Info | 2025-11-17 | PDF 3.3 MB |
| RF Exposure Info (MPE) | RF Exposure Info | 2022-03-07 | PDF 492.1 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2021-03-15 | PDF 448 KB |
| Block diagram Metadata only | Block Diagram | PDF 136 KB | |
| Block diagram Metadata only | Block Diagram | PDF 205.6 KB | |
| Schematics Metadata only | Schematics | PDF 234.2 KB | |
| Schematics Metadata only | Schematics | PDF 286.8 KB | |
| 04 LTC_Operational Description-Tune up Info_FCC Metadata only | Operational Description | PDF 195.3 KB | |
| Operational Description rev Metadata only | Operational Description | PDF 260.1 KB | |
| Operational Description rev Metadata only | Operational Description | PDF 690.1 KB | |
| Software Operational Description rev Metadata only | Operational Description | PDF 757.7 KB | |
| Software Operational Description_rev3 Metadata only | Operational Description | PDF 105.9 KB |
Application Information
| Application ID | dBoTJIp/t0r6lr+wU6+TAQ== |
|---|---|
| Final Action Date | 2025-11-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006089460 |
| Model | T99H209 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Responsible Party | Masahiko Kimura, masahiko.kimura@brother.co.jp , +81-70-1385-8884 |
| Technical Contact | Takumi Shimada, UL Japan, Inc., Takumi.Shimada@ul.com  , 81-596-24-8999 |
| Test Firm | Takayuki Shimada, UL Japan, Inc.(Ise), Takayuki.Shimada@ul.com , 81-596-24-8999 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dBoTJIp/t0r6lr+wU6+TAQ== | 2025-11-17 | Class II permissive change or modification of presently authorized equipment |
| X6ZQ17AHZbvDZKv4le6EbQ== | 2025-11-17 | Class II permissive change or modification of presently authorized equipment |
| HNl0PTBXxC0Hws1T2PMJZQ== | 2025-11-17 | Class II permissive change or modification of presently authorized equipment |
| sGJsGQrhlwZGuVfCyM07bg== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| I0dew/LeoRq8Pob0tETC8Q== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| +IP7AiSoQA1X1KZVC2fsFA== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| w6ig8c23T62bEXfhkltvtg== | 2021-03-15 | Original Equipment |
| mm9wnVTaWjogn9MVbDfG5Q== | 2021-03-15 | Original Equipment |
| fG3L/91Zd8vGJP0sSEPS1A== | 2021-03-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application X6ZQ17AHZbvDZKv4le6EbQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2025 Application Dated: 11/17/2025 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change to add specific portable configuration host described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Mobile Printer, RJ-4255WB). Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for Body-worn exposure condition under this FCC ID is 1.09 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application w6ig8c23T62bEXfhkltvtg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.124 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.119 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Power listed is maximum conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application w6ig8c23T62bEXfhkltvtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.124 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.119 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Power listed is maximum conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.124 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.119 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sGJsGQrhlwZGuVfCyM07bg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.124 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.119 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. This device supports 20, 40, and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.38 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mm9wnVTaWjogn9MVbDfG5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.38 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.38 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application I0dew/LeoRq8Pob0tETC8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.38 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2025 Application Dated: 11/17/2025 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.38 |
| Class II Permissive Change to add specific portable configuration host described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Mobile Printer, RJ-4255WB). Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for Body-worn exposure condition under this FCC ID is 1.09 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application fG3L/91Zd8vGJP0sSEPS1A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fG3L/91Zd8vGJP0sSEPS1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/15/2021 Application Dated: 03/15/2021 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/17/2025 Application Dated: 11/17/2025 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.124 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.121 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.119 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.118 |
| Class II Permissive Change to add specific portable configuration host described in this filing. Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Mobile Printer, RJ-4255WB). Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for Body-worn exposure condition under this FCC ID is 1.09 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application +IP7AiSoQA1X1KZVC2fsFA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Brother Industries, Ltd. |
| 15-1, Naeshiro-cho |
| Mizuho-ku Nagoya 467-8561, Japan |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +IP7AiSoQA1X1KZVC2fsFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Brother Industries, Ltd. 15-1, Naeshiro-cho Mizuho-ku Nagoya 467-8561, Japan |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Masahiko Kimura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B3QT99H209 |
| Name of Grantee: | Brother Industries, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE802.11a/b/g/n/ac (1x1)+ BT 5.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change for adding second source components as described in this filing. Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |