FCC ID B4Z-801-IXT

GE Simon XT

by UTC Fire & Security Americas Corporation, Inc.

Grantee Code: B4Z   Product Code: 801IXT
Latest application date: 2009-11-05

FCC ID Device Details

FCC IDB4Z-801-IXT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeB4Z
Product Code801IXT
Applicant BusinessUTC Fire & Security Americas Corporation, Inc. 🇺🇸
Related Domains ge.com
Equipment ClassGE Simon XT
Test FirmTUV SUD America - Product Service

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
319.5 MHzOriginal Equipment2009-11-05
2412-2462 MHzOriginal Equipment2009-11-05
824.2-848.8 MHzOriginal Equipment2009-11-05
908.4 MHzOriginal Equipment2009-11-05

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2009-11-05PDF 2.1 MB
Internal photosInternal Photos2009-11-05PDF 1.7 MB
External photosExternal Photos2009-11-05PDF 269.4 KB
FCC Id labelID Label/Location Info2009-11-05PDF 100.8 KB
Set up photosTest Setup Photos2009-11-05PDF 935.3 KB
Set up photosTest Setup Photos2009-11-05PDF 926.8 KB
Setup photosTest Setup Photos2009-11-05PDF 991.8 KB
Test reportTest Report2009-11-05PDF 1.6 MB
Test reportTest Report2009-11-05PDF 1.3 MB
Test reportTest Report2009-11-05PDF 1.7 MB
Test report 1Test Report2009-11-05PDF 790 KB
Test report 2Test Report2009-11-05PDF 725.6 KB
POACover Letter(s)2009-11-05PDF 44.3 KB
Request for confidentialityCover Letter(s)2009-11-05PDF 28 KB
MPERF Exposure Info2009-11-05PDF 31.2 KB
MPE part 22RF Exposure Info2009-11-05PDF 100.3 KB
MPE part 24RF Exposure Info2009-11-05PDF 99.7 KB

Application Information

Application IDuoZH7/lmNxIYij9YQiULJg==
Final Action Date2009-11-05
Application PurposeOriginal Equipment
Applicant FRN0005832522
Model-801-IXT
Frequency Range319.5 MHz
Equipment ClassDSC - Part 15 Security/Remote Control Transmitter
Device DescriptionGE Simon XT
Responsible PartyRick Conner, Regulatory Compliance Leader, rick.conner@ge.com , 651-779-4824
Test FirmJoel Schneider, TUV SUD America - Product Service, jschneider@tuvam.com , 651-604-4582
TCB Emailhotline@americantcb.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
uoZH7/lmNxIYij9YQiULJg==2009-11-05Original Equipment
cGUB3XfJk3nFzX+hXToiEw==2009-11-05Original Equipment
a4iGldqcj09csYi/xz5R5g==2009-11-05Original Equipment
U4eecS4vKjXsxVNsAq7Ssw==2009-11-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
319.5 MHz15.231
824.2-848.8 MHz1.232.5ppm290KGXW22H
908.4 MHz15C
1850.2-1909.8 MHz0.2692.5ppm290KGXW24E
2412-2462 MHz0.033000015CCC

Grants

TCB Grant - Application uoZH7/lmNxIYij9YQiULJg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2009

Application Dated: 11/04/2009
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Part 15 Security/Remote Control Transmitter
Notes: GE Simon XT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15.231 319.5  -  319.5  


EAS Grant - Application uoZH7/lmNxIYij9YQiULJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
United States
  Date of Grant: 11/05/2009

Application Dated: 11/04/2009
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Part 15 Security/Remote Control Transmitter
Notes: GE Simon XT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15.231 319.5  -  319.5  



TCB Grant - Application U4eecS4vKjXsxVNsAq7Ssw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2009

Application Dated: 11/04/2009
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: GE Simon XT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 908.4  -  908.4  


EAS Grant - Application U4eecS4vKjXsxVNsAq7Ssw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
United States
  Date of Grant: 11/05/2009

Application Dated: 11/04/2009
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: GE Simon XT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 908.4  -  908.4  



TCB Grant - Application cGUB3XfJk3nFzX+hXToiEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2009

Application Dated: 10/26/2009
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Digital Transmission System
Notes: GE Simon XT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.033  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter than as shown in the filing. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application cGUB3XfJk3nFzX+hXToiEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
United States
  Date of Grant: 11/05/2009

Application Dated: 10/26/2009
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: Digital Transmission System
Notes: GE Simon XT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.033  

Power Output listed is Conducted. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter than as shown in the filing. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application a4iGldqcj09csYi/xz5R5g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/05/2009

Application Dated: 11/04/2009
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GE Simon XT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.23 2.5  PM 290KGXW
24E 1850.2  -  1909.8 0.269 2.5  PM 290KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter than as shown in the filing. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application a4iGldqcj09csYi/xz5R5g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Road
Arden Hills, MN 55112
United States
  Date of Grant: 11/05/2009

Application Dated: 11/04/2009
 
Attention: Rick Conner , Regulatory Compliance Leader

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B4Z-801-IXT
Name of Grantee:  UTC Fire & Security Americas Corporation, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: GE Simon XT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.23 2.5  PM 290KGXW
24E 1850.2  -  1909.8 0.269 2.5  PM 290KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. The antenna(s) used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter than as shown in the filing. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: