8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.

HP Inc. Intel Dual Band Wireless-AC 8265

Page 1 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 2 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 3 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 4 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 5 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 6 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 7 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 8 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 9 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 10 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 11 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 12 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 13 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 14 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 15 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 16 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 17 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 18 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 19 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 20 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 21 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 22 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 23 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 24 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 25 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 26 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 27 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 28 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 29 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 30 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 31 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 32 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 33 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 34 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 35 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 36 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 37 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 38 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 39 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 40 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 41 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 42 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 43 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 44 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 45 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 46 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 47 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 48 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 49 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 50 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 51 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 52 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 53 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 54 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 55 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 56 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 57 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 58 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 59 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 60 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 61 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 62 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 63 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 64 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 65 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 66 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 67 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 68 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 69 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 70 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 71 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 72 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 73 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 74 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 75 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 76 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 77 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 78 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 79 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 80 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 81 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 82 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 83 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 84 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 85 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 86 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 87 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 88 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 89 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 90 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 91 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 92 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 93 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 94 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 95 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 96 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 97 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 98 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 99 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 100 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 101 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 102 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 103 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 104 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 105 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 106 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 107 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 108 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 109 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 110 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 111 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 112 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Page 113 of 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.

Report No. : E5/2018/50001
Page : 1 of 113
SAR TEST REPORT
The following samples were submitted and identified on behalf of the client as:
Product Name
Brand Name
Model No.
Prepared for
Notebook PC
HP
HSN-W01C
HP Inc.
3390 East Harmony Road, Fort Collins Colorado , USA
80528
Standards
IEEE/ANSI C95.1-1992, IEEE 1528-2013,
KDB248227D01v02r02,KDB865664D01v01r04,
KDB865664D02v01r02,KDB447498D01v06,
KDB616217D04v01r02,
FCC ID
B94-8265NGWR
Date of Receipt
May. 04, 2018
Date of Test(s)
May. 08, 2018 ~ May. 14, 2018
Date of Issue
Jun. 01, 2018
In the configuration tested, the EUT complied with the standards specified above.
Remarks:
This report details the results of the testing carried out on one sample, the results contained in this test
report do not relate to other samples of the same product. The manufacturer should ensure that all products in
series production are in conformity with the product sample detailed in this report.
This report may only be reproduced and distributed in full. If the product in this report is used in any
configuration other than that detailed in the report, the manufacturer must ensure the new system complies
with all relevant standards. Any mention of SGS Taiwan Electronic & Communication Laboratory or testing
done by SGS Taiwan Electronic & Communication Laboratory in connection with distribution or use of the
product described in this report must be approved by SGS Taiwan Electronic & Communication Laboratory in
writing.
Signed on behalf of SGS
Clerk / Ruby Ou
Engineer / Bond Tsai
Asst. Manager / John Yeh
Date: Jun. 01, 2018
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 2 of 113
Revision History
Report Number
Revision
Description
Issue Date
E5/2018/50001
Rev.00
Initial creation of document
May. 21, 2018
E5/2018/50001
Rev.01
1st modification
Jun. 01, 2018
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 3 of 113
Contents
1. General Information ....................................................................................................... 4
1.1 Testing Laboratory ............................................................................................................... 4
1.2 Details of Applicant.............................................................................................................. 4
1.3 Description of EUT .............................................................................................................. 5
1.4 Test Environment .............................................................................................................. 24
1.5 Operation Description ....................................................................................................... 24
1.6 Triggering verification for power reduction ........................................................................ 28
1.7 The SAR Measurement System ........................................................................................ 35
1.8 System Components ......................................................................................................... 37
1.9 SAR System Verification ................................................................................................... 39
1.10 Tissue Simulant Fluid for the Frequency Band ............................................................... 41
1.11 Evaluation Procedures .................................................................................................... 43
1.12 Probe Calibration Procedures ......................................................................................... 44
1.13 Test Standards and Limits ............................................................................................... 47
2. Summary of Results .................................................................................................... 49
3. Simultaneous Transmission Analysis ........................................................................ 50
3.1 Estimated SAR calculation ................................................................................................ 51
3.1 SPLSR evaluation and analysis ........................................................................................ 51
4. Instruments List ........................................................................................................... 54
5. Measurements .............................................................................................................. 55
6.SAR System Performance Verification ....................................................................... 66
7. DAE & Probe Calibration Certificate ........................................................................... 71
8. Uncertainty Budget ...................................................................................................... 87
9. Phantom Description ................................................................................................... 89
10. System Validation from Original Equipment Supplier ............................................ 90
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 4 of 113
1. General Information
1.1 Testing Laboratory
SGS Taiwan Ltd. Electronics & Communication Laboratory
No. 2, Keji 1st Rd., Guishan Township, Taoyuan County, 33383, Taiwan
Tel
+886-2-2299-3279
Fax
+886-2-2298-0488
Internet
http://www.tw.sgs.com/
1.2 Details of Applicant
Company Name
Company Address
HP Inc.
3390 East Harmony Road, Fort Collins Colorado , USA
80528
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 5 of 113
1.3 Description of EUT
General Information of Host:
Equipment Under Test Notebook PC
Brand Name
HP
Model No.
HSN-W01C
Integrated Module
Brand Name : Intel
Model Name : 8265NGW
FCC ID
Mode of Operation
Duty Cycle
B94-8265NGWR
WLAN802.11 a/b/g/n(20M/40M)/ac(20M/40M/80M)
Bluetooth
WLAN802.11 a/b/g/n(20M/40M)/
ac(20M/40M/80M)
Bluetooth
WLAN802.11 b/g/n(20M)
2412
─
2472
WLAN802.11 n(40M)
2422
─
2462
WLAN802.11 a/n(20M)/ac(20M) 5.2G 5180
─
5240
WLAN802.11 n(40M)/ac(40M) 5.2G
─
5230
5190
WLAN802.11 ac(80M) 5.2G
TX Frequency Range
(MHz)
5210
WLAN802.11 a/n(20M)/ac(20M) 5.3G 5260
─
5320
WLAN802.11 n(40M)/ac(40M) 5.3G
─
5310
5270
WLAN802.11 ac(80M) 5.3G
5290
WLAN802.11 a/n/ac(20M) 5.6G
5500
─
5720
WLAN802.11 n/ac(40M) 5.6G
5510
─
5710
WLAN802.11 ac(80M) 5.6G
5530
─
5690
WLAN802.11 a/n(20M)/ac(20M) 5.8G 5745
─
5825
WLAN802.11 n(40M)/ac(40M) 5.8G
─
5795
5710
WLAN802.11 ac(80M) 5.8G
5775
Bluetooth
2402
─
2480
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 6 of 113
WLAN802.11 b/g/n(20M)
─
13
WLAN802.11 n(40M)
─
11
WLAN802.11 a/n(20M)/ac(20M) 5.2G
36
─
48
WLAN802.11 n(40M)/ac(40M) 5.2G
38
─
46
WLAN802.11 ac(80M) 5.2G
Channel Number
(ARFCN)
42
WLAN802.11 a/n(20M)/ac(20M) 5.3G
52
─
64
WLAN802.11 n(40M)/ac(40M) 5.3G
54
─
62
WLAN802.11 ac(80M) 5.3G
58
WLAN802.11 a/n/ac(20M) 5.6G
100
─
144
WLAN802.11 n/ac(40M) 5.6G
102
─
142
WLAN802.11 ac(80M) 5.6G
106
─
138
WLAN802.11 a/n(20M)/ac(20M) 5.8G
149
─
165
WLAN802.11 n(40M)/ac(40M) 5.8G
151
─
159
WLAN802.11 ac(80M) 5.8G
155
Bluetooth
─
78
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 7 of 113
Max. SAR (1g) (Unit: W/Kg)
Antenna
Main
Band
Measured Reported Channel
Position
WLAN802.11 b
0.31
0.31
Top side
WLAN802.11 n(40M) 5.2G
0.46
0.46
46
Top side
WLAN802.11 n(40M) 5.3G
0.47
0.47
54
Top side
WLAN802.11 ac(80M) 5.6G
0.48
0.48
106
Top side
WLAN802.11 ac(80M) 5.8G
0.55
0.56
155
Top side
WLAN802.11 b
0.56
0.56
Top side
Bluetooth (GFSK)
0.05
0.06
78
Top side
WLAN802.11 n(40M) 5.2G
0.35
0.35
38
Top side
WLAN802.11 n(40M) 5.3G
0.37
0.37
54
Top side
WLAN802.11 ac(80M) 5.6G
0.32
0.33
138
Top side
WLAN802.11 ac(80M) 5.8G
0.31
0.31
155
Top side
Aux
Antenna Information
Tablet mode
Vendor
Antenna
Part Number
Frequency
Gain (dBi)
Antenna
Part Number
Frequency
Gain (dBi)
INPAQ
Main (PIFA)
INPAQ
Aux (PIFA)
025.901B9.0001 (WA-P-LB-02-512)
025.901BA.0001 (WA-P-LB-02-513)
2.4G
-1.56
5.2G
2.61
5.5G
0.42
5.8G
-1.43
NB mode
2.4G
-0.78
5.2G
-1.01
5.5G
0.16
5.8G
-2.1
Main (PIFA)
Aux (PIFA)
025.901B9.0001 (WA-P-LB-02-512)
025.901BA.0001 (WA-P-LB-02-513)
2.4G
-4.42
5.2G
-1.53
5.5G
-1.70
5.8G
-0.12
2.4G
-0.9
5.2G
0.35
5.5G
-0.16
5.8G
-3.39
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 8 of 113
WLAN802.11 a/b/g/n(20M/40M)/ac(20M/40M/80M) conducted power table:
SISO
MIMO
Antenna
Band
Chain 0
Chain 1
Chain0+1
WLAN802.11b
WLAN802.11g
WLAN802.11n(20M)
WLAN802.11n(40M)
WLAN802.11a
WLAN802.11n(20M) 5G
WLAN802.11n(40M) 5G
WLAN802.11ac(20M) 5G
WLAN802.11ac(40M) 5G
WLAN802.11ac(80M) 5G
Main (Chain 0) (full power)
Main Antenna
Band
Mode
802.11b
802.11g
2450 MHz
802.11n20-HT0
802.11n40-HT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
10
11
10
11
10
11
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2422
2437
2452
1Mbps
6Mbps
MCS0
MCS0
18.00
20.00
20.00
20.00
19.00
17.00
19.00
20.00
19.00
17.00
17.00
19.00
20.00
19.00
17.00
16.00
16.50
15.00
Average
power
(dBm)
17.93
19.96
19.98
19.92
18.87
16.92
18.95
19.96
18.90
16.93
16.94
18.88
19.97
18.89
16.93
15.86
16.42
14.96
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 9 of 113
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
5.15-5.25 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
36
40
44
48
36
40
44
48
36
40
44
48
38
46
38
46
42
5180
5200
5220
5240
5180
5200
5220
5240
5180
5200
5220
5240
5190
5230
5190
5230
5210
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
18.00
20.00
20.00
20.00
18.00
20.00
20.00
20.00
18.00
20.00
20.00
20.00
17.00
20.00
17.00
20.00
13.00
Average
power
(dBm)
17.98
19.95
19.97
19.98
17.95
19.94.
19.99
19.89
17.94
19.91
19.93
19.95
16.95
19.98
16.92
19.89
12.97
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
5.25-5.35 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Data Rate + Max.
Channel
(MHz)
Tolerance
(dBm)
52
56
60
64
52
56
60
64
52
56
60
64
54
62
54
62
58
5260
5280
5300
5320
5260
5280
5300
5320
5260
5280
5300
5320
5270
5310
5270
5310
5290
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
17.00
20.00
20.00
20.00
17.00
20.00
20.00
20.00
17.00
20.00
14.00
20.00
14.00
12.00
Average
power
(dBm)
19.97
19.95
19.99
16.94
19.98
19.96
19.99
16.97
19.92
19.95
19.90
16.92
19.98
13.99
19.93
13.97
11.99
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 10 of 113
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
802.11ac20-VHT0
5600 MHz
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
104
116
120
124
128
136
104
116
120
124
128
136
104
116
120
124
128
136
144
102
110
118
126
134
142
102
110
118
126
134
142
106
122
138
5520
5580
5600
5620
5640
5680
5520
5580
5600
5620
5640
5680
5520
5580
5600
5620
5640
5680
5720
5510
5550
5590
5630
5670
5710
5510
5550
5590
5630
5670
5710
5530
5610
5690
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
19.00
16.00
20.00
20.00
20.00
19.00
20.00
16.00
20.00
20.00
20.00
19.00
20.00
16.00
18.00
20.00
Average
power
(dBm)
19.99
19.95
19.93
19.88
19.94
19.97
19.96
19.99
19.91
19.95
19.90
19.93
19.99
19.97
19.98
19.94
19.96
19.98
18.94
15.98
19.95
19.99
19.95
18.99
19.99
15.96
19.89
19.92
19.98
18.97
19.99
15.99
17.98
19.98
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 11 of 113
Main Antenna
Mode
Mode
802.11a
802.11n20-HT0
5800 MHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
149
157
165
149
157
165
149
157
165
151
159
151
159
155
5745
5785
5825
5745
5785
5825
5745
5785
5825
5755
5795
5755
5795
5775
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
18.00
Average
power
(dBm)
19.99
19.96
19.93
19.97
19.95
19.98
19.89
19.94
19.99
19.96
19.98
19.95
19.90
17.99
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 12 of 113
Aux (Chain 1) (full power)
Aux Antenna
Band
Mode
802.11b
802.11g
2450 MHz
802.11n20-HT0
802.11n40-HT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
10
11
10
11
10
11
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2422
2437
2452
1Mbps
6Mbps
MCS0
MCS0
18.00
20.00
20.00
20.00
19.00
16.00
19.00
20.00
19.00
16.00
16.00
19.00
20.00
19.00
16.00
13.00
16.50
15.00
17.95
19.97
19.99
19.95
18.86
15.94
18.96
19.99
18.93
15.86
15.95
18.97
19.93
18.95
15.98
12.91
16.46
14.97
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 13 of 113
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
5.15-5.25 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
Data Rate
Channel
power
(MHz)
Tolerance (dBm)
(dBm)
36
40
44
48
36
40
44
48
36
40
44
48
38
46
38
46
42
5180
5200
5220
5240
5180
5200
5220
5240
5180
5200
5220
5240
5190
5230
5190
5230
5210
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
18.00
20.00
20.00
20.00
18.00
20.00
20.00
20.00
18.00
20.00
20.00
20.00
17.00
20.00
17.00
20.00
13.00
17.95
19.96
19.99
19.98
17.92
19.89
19.91
19.93
17.99
19.92
19.00
19.97
16.96
19.99
16.95
19.97
12.99
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
5.25-5.35 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
Data Rate
Channel
power
(MHz)
Tolerance (dBm)
(dBm)
52
56
60
64
52
56
60
64
52
56
60
64
54
62
54
62
58
5260
5280
5300
5320
5260
5280
5300
5320
5260
5280
5300
5320
5270
5310
5270
5310
5290
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
17.00
20.00
20.00
20.00
17.00
20.00
20.00
20.00
17.00
20.00
13.00
20.00
13.00
11.00
19.99
19.93
19.97
16.93
19.94
19.96
19.99
16.92
19.98
19.95
19.97
16.93
19.96
12.95
19.99
12.95
10.97
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 14 of 113
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
802.11ac20-VHT0
5600 MHz
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
104
116
120
124
128
136
104
116
120
124
128
136
104
116
120
124
128
136
144
102
110
118
126
134
142
102
110
118
126
134
142
106
122
138
5520
5580
5600
5620
5640
5680
5520
5580
5600
5620
5640
5680
5520
5580
5600
5620
5640
5680
5720
5510
5550
5590
5630
5670
5710
5510
5550
5590
5630
5670
5710
5530
5610
5690
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
19.00
18.00
20.00
20.00
20.00
19.00
20.00
18.00
20.00
20.00
20.00
19.00
20.00
13.00
19.00
19.00
19.96
19.99
19.91
19.94
19.96
19.98
19.92
19.93
19.99
19.95
19.93
19.88
19.90
19.99
19.96
19.93
19.95
19.97
18.99
17.95
19.98
19.96
19.89
18.92
19.95
17.95
19.99
19.96
19.94
18.90
19.96
12.96
18.98
18.99
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 15 of 113
Aux Antenna
Mode
Mode
802.11a
802.11n20-HT0
5800 MHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
149
157
165
149
157
165
149
157
165
151
159
151
159
155
5745
5785
5825
5745
5785
5825
5745
5785
5825
5755
5795
5755
5795
5775
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
18.00
19.96
19.92
19.88
19.99
19.93
19.97
19.95
19.92
19.89
19.91
19.99
19.91
19.94
17.95
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 16 of 113
Main (Chain 0) (reduced power)
Main Antenna
Band
Mode
802.11b
802.11g
2450 MHz
802.11n20-HT0
802.11n40-HT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
10
11
10
11
10
11
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2422
2437
2452
1Mbps
6Mbps
MCS0
MCS0
18.00
20.00
20.00
20.00
19.00
17.00
19.00
20.00
19.00
17.00
17.00
19.00
20.00
19.00
17.00
16.00
16.50
15.00
Average
power
(dBm)
17.93
19.96
19.98
19.92
18.87
16.92
18.95
19.96
18.90
16.93
16.94
18.88
19.97
18.89
16.93
15.86
16.42
14.96
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 17 of 113
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
5.15-5.25 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Data Rate + Max.
Channel
(MHz)
Tolerance
(dBm)
36
40
44
48
36
40
44
48
36
40
44
48
38
46
38
46
42
5180
5200
5220
5240
5180
5200
5220
5240
5180
5200
5220
5240
5190
5230
5190
5230
5210
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
13.00
Average
power
(dBm)
15.96
15.93
15.97
15.95
15.94
15.95
15.90
15.93
15.87
15.90
15.89
15.93
15.95
15.97
15.92
15.90
12.97
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
5.25-5.35 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
52
56
60
64
52
56
60
64
52
56
60
64
54
62
54
62
58
5260
5280
5300
5320
5260
5280
5300
5320
5260
5280
5300
5320
5270
5310
5270
5310
5290
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
14.00
16.00
14.00
12.00
Average
power
(dBm)
15.96
15.98
15.95
15.94
15.93
15.98
15.99
15.95
15.94
15.98
15.97
15.90
15.94
13.89
15.92
13.92
11.90
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 18 of 113
Main Antenna
Band
Mode
802.11a
802.11n20-HT0
802.11ac20-VHT0
5600 MHz
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
100
116
120
124
128
140
100
116
120
124
128
140
100
116
120
124
128
140
144
102
110
118
126
134
102
110
118
126
134
142
106
122
138
5500
5580
5600
5620
5640
5700
5500
5580
5600
5620
5640
5700
5500
5580
5600
5620
5640
5700
5720
5510
5550
5590
5630
5670
5510
5550
5590
5630
5670
5710
5530
5610
5690
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
Average
power
(dBm)
15.96
15.98
15.90
15.86
15.89
15.94
15.99
15.97
15.86
15.92
15.90
15.96
15.99
15.97
15.92
15.90
15.91
15.95
15.98
15.95
15.97
15.92
15.90
15.96
15.98
15.99
15.93
15.87
15.93
15.91
15.97
15.92
15.94
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 19 of 113
Main Antenna
Mode
Mode
802.11a
802.11n20-HT0
5800 MHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power
Frequency
Channel
Data Rate + Max.
(MHz)
Tolerance
(dBm)
149
157
165
149
157
165
149
157
165
151
159
151
159
155
5745
5785
5825
5745
5785
5825
5745
5785
5825
5755
5795
5755
5795
5775
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
Average
power
(dBm)
15.94
15.99
15.92
15.84
15.89
15.93
15.92
15.95
15.99
15.89
15.90
15.94
15.88
15.98
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 20 of 113
Aux (Chain 1) (reduced power)
Aux Antenna
Band
Mode
802.11b
802.11g
2450 MHz
802.11n20-HT0
802.11n40-HT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
Data Rate
Channel
power
(MHz)
Tolerance (dBm)
(dBm)
10
11
10
11
10
11
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2412
2417
2437
2457
2462
2422
2437
2452
1Mbps
6Mbps
MCS0
MCS0
18.00
20.00
20.00
20.00
19.00
16.00
19.00
20.00
19.00
16.00
16.00
19.00
20.00
19.00
16.00
13.00
16.50
15.00
17.95
19.97
19.99
19.95
18.86
15.94
18.96
19.99
18.93
15.86
15.95
18.97
19.93
18.95
15.98
12.91
16.46
14.97
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 21 of 113
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
5.15-5.25 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
36
40
44
48
36
40
44
48
36
40
44
48
38
46
38
46
42
5180
5200
5220
5240
5180
5200
5220
5240
5180
5200
5220
5240
5190
5230
5190
5230
5210
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
13.00
15.92
15.95
15.99
15.96
15.92
15.89
15.90
15.94
15.93
15.95
15.91
15.89
15.97
15.94
15.88
15.93
12.86
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
5.25-5.35 GHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
Data Rate
Channel
power
(MHz)
Tolerance (dBm)
(dBm)
52
56
60
64
52
56
60
64
52
56
60
64
54
62
54
62
58
5260
5280
5300
5320
5260
5280
5300
5320
5260
5280
5300
5320
5270
5310
5270
5310
5290
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
13.00
16.00
13.00
11.00
15.98
15.95
15.96
15.97
15.89
15.92
15.90
15.96
15.94
15.99
15.98
15.93
15.92
12.92
15.85
12.94
10.93
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 22 of 113
Aux Antenna
Band
Mode
802.11a
802.11n20-HT0
802.11ac20-VHT0
5600 MHz
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
100
116
120
124
128
140
100
116
120
124
128
140
100
116
120
124
128
140
144
102
110
118
126
134
102
110
118
126
134
142
106
122
138
5500
5580
5600
5620
5640
5700
5500
5580
5600
5620
5640
5700
5500
5580
5600
5620
5640
5700
5720
5510
5550
5590
5630
5670
5510
5550
5590
5630
5670
5710
5530
5610
5690
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
13.00
16.00
16.00
15.98
15.99
15.95
15.86
15.90
15.97
15.96
15.98
15.90
15.92
15.94
15.95
15.93
15.97
15.92
15.90
15.94
15.97
15.95
15.99
15.95
15.90
15.91
15.93
15.98
15.99
15.92
15.90
15.96
15.94
12.94
15.91
15.94
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 23 of 113
Aux Antenna
Mode
Max. Rated
Avg. Power Average
Frequency
+ Max.
power
Channel
Data Rate
(MHz)
Tolerance (dBm)
(dBm)
Mode
802.11a
802.11n20-HT0
5800 MHz
802.11ac20-VHT0
802.11n40-HT0
802.11ac40-VHT0
802.11ac80-VHT0
149
157
165
149
157
165
149
157
165
151
159
151
159
155
5745
5785
5825
5745
5785
5825
5745
5785
5825
5755
5795
5755
5795
5775
6Mbps
MCS0
MCS0
MCS0
MCS0
MCS0
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
15.92
15.90
15.94
15.99
15.97
15.98
15.93
15.87
15.91
15.89
15.88
15.95
15.97
15.93
Bluetooth conducted power table:
Mode
Channel
Frequency
(MHz)
BR/EDR
CH 00
CH 39
CH 78
2402
2441
2480
Mode
Channel
Frequency
(MHz)
LE
CH 00
CH 20
CH 39
2402
2442
2480
Average Output Power (dBm)
1Mbps
10.52
10.74
10.83
2Mbps
7.53
7.98
7.95
3Mbps
6.26
6.51
6.54
Average Output Power (dBm)
GFSK
6.69
6.73
6.81
Max. Rated Avg.
Power + Max. Tolerance (dBm)
11.5
Max. Rated Avg.
Power + Max. Tolerance (dBm)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 24 of 113
1.4 Test Environment
Ambient Temperature: 22±2° C
Tissue Simulating Liquid: 22±2° C
1.5 Operation Description
Use chipset specific software to control the EUT, and makes it transmit in maximum
power. Measurements are performed respectively on the lowest, middle and
highest channels of the operating band(s). The EUT is set to maximum power level
during all tests, and at the beginning of each test the battery is fully charged.
EUT was tested as below based on KDB inquiry.
Tablet mode
Main antenna: Back/top/left sides_0mm with reduced power
Aux antenna: Back/top sides_0mm with reduced power
Laptop mode
SAR measurement for Laptop SAR with full power is not required since the
distance between antenna and user is > 20cm.
Antenna location (tablet mode)
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 25 of 113
Note:
802.11b DSSS SAR Test Requirements:
1. SAR is measured for 2.4 GHz 802.11b DSSS mode using the highest measured
maximum output power channel, when the reported SAR of the highest
measured maximum output power channel for the exposure configuration is ≤
0.8 W/kg, no further SAR testing is required for 802.11b DSSS in that exposure
configuration.
2. When the reported SAR is > 0.8 W/kg, SAR is required for that exposure
configuration using the next highest measured output power channel. When any
reported SAR is > 1.2 W/kg, SAR is required for the third channel; i.e., all
channels require testing.
802.11g/n OFDM SAR Test Exclusion Requirements:
3. SAR is not required for 802.11g/n since the highest reported SAR for DSSS is
adjusted by the ratio of OFDM to DSSS specified maximum output power and
the adjusted SAR is ≤ 1.2 W/kg.
Initial Test Configuration:
4. An initial test configuration is determined for OFDM transmission modes
according to the channel bandwidth, modulation and data rate combination(s)
with the highest maximum output power specified for production units in each
standalone and aggregated frequency band.
5. SAR is measured using the highest measured maximum output power channel.
When the reported SAR of the initial test configuration is > 0.8 W/kg, SAR
measurement is required for the subsequent next highest measured output
power channel(s) in the initial test configuration until the reported SAR is ≤ 1.2
W/kg or all required channels are tested.
6. Since the highest reported SAR for the initial test configuration is adjusted by the
ratio of the subsequent test configuration to initial test configuration specified
maximum output power and the adjusted SAR is ≤ 1.2 W/kg, SAR is not required
for subsequent test configuration.
7. For WLAN Main/Aux antennas, 5.2n(40M) / 5.3n(40M) / 5.6ac(80M) / 5.8ac(80M)
is chosen to be the initial test configurations.
8. BT and WLAN Aux use the same antenna path, but they can’t transmit at the
same time.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 26 of 113
9. According to KDB447498 D01, testing of other required channels is not required
when the reported 1-g SAR for the highest output channel is ≤ 0.8 W/kg, when
the transmission band is ≤ 100 MHz.
10. According to KDB865664 D01, SAR measurement variability must be assessed
for each frequency band. When the original highest measured SAR is ≥ 0.8 W/kg,
repeated that measurement once. Perform a second repeated measurement
only if the ratio of largest to smallest SAR for the original and first repeated
measurements is > 1.20 or when the original or repeated measurement is ≥ 1.45
W/kg (~10% from the 1-g SAR limit)
11. Based on KDB447498D01,
(1) SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation
distances≤ 50 mm are determined by:
Max. tune up power mW
Min. test separation distance mm
f GHz
When the minimum test separation distance is < 5mm, 5mm is applied to
determine SAR test exclusion.
(2) For test separation distances > 50 mm, and the frequency at 100 MHz to
1500MHz, the SAR test exclusion threshold is determined according to the
following, and as illustrated in Appendix B of KDB447498 D01.
MHz
[(Threshold at 50mm in step1) + (test separation distance-50mm) x (f 150
)]
(mW),
(3) For test separation distances > 50 mm, and the frequency at >1500MHz to
6GHz, the SAR test exclusion threshold is determined according to the
following, and as illustrated in Appendix B of KDB447498 D01.
[(Threshold at 50mm in step1) + (test separation distance-50mm)x10](mW),
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 27 of 113
Mode
WLAN Main
2.45GHz
WLAN Main
5GHz
Mode
WLAN Aux
2.45GHz
WLAN Aux
5GHz
BT
Max. tune-up power(dBm)
20
16
Max. tune-up power(dBm)
20
16
11.5
39.811
Max. tune-up power(mW)
100.000
39.811
14.125
less than 5
less than 5
less than 5
31.382
19.217
4.449
YES
YES
YES
215.2
215.2
215.2
YES
YES
YES
NO
NO
NO
Max. tune-up power(mW)
Top side
Test separation
distance
Calculation
value
Require SAR
testing?
Test separation
distance
Right side
>20cm
Left side
Require SAR
testing?
Test separation
distance
Calculation
value
Require SAR
testing?
Test separation
distance
Bottom
side
>20cm
Require SAR
testing?
Test separation
distance
Calculation
Back side
value
Require SAR
testing?
100.000
less than 5
less than 5
31.382
19.217
YES
YES
298.2
298.2
YES
YES
NO
NO
19.8
19.8
7.925
4.853
YES
YES
217.32
217.32
YES
YES
NO
NO
less than 5
less than 5
31.382
19.217
YES
YES
Top side
Test separation
distance
Calculation
value
Require SAR
testing?
Test separation
distance
Right side
>20cm
102.8
102.8
102.8
Left side
Require SAR
testing?
Test separation
distance
Calculation
value
Require SAR
testing?
Test separation
distance
623.598
590.150
623.250
NO
NO
NO
217.32
217.32
217.32
>20cm
YES
YES
YES
NO
NO
NO
less than 5
less than 5
less than 5
31.382
19.217
4.449
YES
YES
YES
Bottom
side
Require SAR
testing?
Test separation
distance
Calculation
Back side
value
Require SAR
testing?
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 28 of 113
1.6 Triggering verification for power reduction
The device is a convertible laptop computer with a lid open up to x360 degree.
There are the sensors within this device, and the sensors can calculate the angle
between the screen and the keyboard base, and then reduce the maximum power
when operating in tablet mode.
Also, the G-sensor will calculate the hinge angle for power reduction and its
operation is no related the triggering distance and coverage.
When the device is operated in the laptop mode, the power reduction will not be
triggered, but when it is operating in the tablet mode, the power reduction will be
triggered. Besides, the power reduction is a single fixed level of power reduction.
For the triggering verification, the measured conducted output power is monitored
qualitatively to identify the triggering characteristics and recorded quantitatively,
versus hinge angle.
Illustration of hinge angle
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 29 of 113
1.6.1 Results and conclusion
The measured output power versus hinge angle is tabulated in the following
table, and the triggering verification complies with the device mode / power
level declared by the manufacturer.
Laptop mode: full power (35∘-159∘)
Tablet mode: reduced power
2.4 Main
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 30 of 113
2.4 Aux
5.2Main
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 31 of 113
5.2Aux
5.3Main
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 32 of 113
5.3Aux
5.6Main
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 33 of 113
5.6Aux
5.8Main
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 34 of 113
5.8Aux
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 35 of 113
1.7 The SAR Measurement System
A block diagram of the SAR measurement System is given in Fig. a. This SAR
Measurement System uses a Computer-controlled 3-D stepper motor system
(SPEAG DASY 5 professional system). The model EX3DV4 field probe is used to
determine the internal electric fields. The SAR can be obtained from the equation
SAR= σ (|Ei|2)/ ρ where σ and ρ are the conductivity and mass density of the
tissue-simulant.
The DASY 5 system for performing compliance tests consists of the following
items:
1. A standard high precision 6-axis robot (Staubli RX family) with controller, teach
pendant and software. An arm extension is for accommodating the data
acquisition electronics (DAE).
2. A dosimetric probe, i.e., an isotropic E-field probe optimized and calibrated for
usage intissue simulating liquid. The probe is equipped with an optical surface
detector system.
3. A data acquisition electronics (DAE) which performs the signal amplification,
signal multiplexing, AD-conversion, offset measurements, mechanical surface
detection, collision detection, etc. The unit is battery powered with standard or
rechargeable batteries. The signal is optically transmitted to the EOC.
Fig. a The block diagram of SAR system
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 36 of 113
4. The Electro-optical converter (EOC) performs the conversion between optical
and electrical of the signals for the digital communication to the DAE and for the
analog signal from the optical surface detection. The EOC is connected to the
measurement server.
5. The function of the measurement server is to perform the time critical tasks such
as signal filtering, control of the robot operation and fast movement interrupts.
6. A probe alignment unit which improves the (absolute) accuracy of the probe
positioning.
7. A computer operating Windows 7.
8. DASY 5 software.
9. Remote control with teach pendant and additional circuitry for robot safety such
as warning lamps, etc.
10. The SAM twin phantom enabling testing left-hand and right-hand usage.
11. The device holder for handheld mobile phones.
12. Tissue simulating liquid mixed according to the given recipes.
13. Validation dipole kits allowing to validate the proper functioning of the system.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 37 of 113
1.8 System Components
EX3DV4 E-Field Probe
Construction Symmetrical design with triangular core
Built-in shielding against static charges
PEEK enclosure material (resistant to
organic solvents, e.g., DGBE)
Calibration
Basic Broad Band Calibration in air
Conversion Factors (CF) for HSL
2450/5200/5300/5600/5800 MHz
Additional CF for other liquids and
frequencies upon request
Frequency
Directivity
10 MHz to > 6 GHz
± 0.3 dB in HSL (rotation around probe axis)
± 0.5 dB in tissue material (rotation normal to probe axis)
10 µW/g to > 100 mW/g
Linearity: ± 0.2 dB (noise: typically < 1 µW/g)
Tip diameter: 2.5 mm
High precision dosimetric measurements in any exposure scenario
(e.g., very strong gradient fields). Only probe which enables
compliance testing for frequencies up to 6 GHz with precision of
better 30%.
Dynamic
Range
Dimensions
Application
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 38 of 113
PHANTOM
Model
Construction
ELI
The ELI phantom is used for compliance testing of handheld and
body-mounted wireless devices in the frequency range of 30 MHz
to 6 GHz. ELI is fully compatible with the IEC 62209-2
standard and all known tissue simulating liquids. ELI has been
optimized regarding its performance and can be integrated into
our standard phantom tables. A cover prevents evaporation of the
liquid. Reference markings on the phantom allow installation of
the complete setup, including all predefined phantom positions
and measurement grids, by teaching three points. The phantom
is compatible with all SPEAG dosimetric probes and dipoles.
2 ± 0.2 mm
Shell
Thickness
Filling Volume Approx. 30 liters
Dimensions
Major axis: 600 mm
Minor axis: 400 mm
DEVICE HOLDER
Construction The device holder (Supporter)
for Notebook is made by POM
(polyoxymethylene resin ) ,
which is non-metal and
non-conductive. The height
can be adjusted to fit varies
kind of notebooks.
Device Holder
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 39 of 113
1.9 SAR System Verification
The microwave circuit arrangement for system verification is sketched in Fig. b. The
daily system accuracy verification occurs within the flat section of the SAM
phantom. A SAR measurement was performed to see if the measured SAR was
within +/- 10% from the target SAR values. These tests were done at
2450/5200/5300/5600/5800 MHz. The tests were conducted on the same days as
the measurement of the DUT. The obtained results from the system accuracy
verification are displayed in the table 1 (SAR values are normalized to 1W forward
power delivered to the dipole). During the tests, the liquid depth above the ear
reference points was ≥ 15 cm ± 5 mm (frequency ≤ 3 GHz) or ≥ 10 cm ± 5 mm
(frequency > 3 G Hz) in all the cases. It is seen that the system is operating within
its specification, as the results are within acceptable tolerance of the reference
values.
Fig. b The block diagram of system verification
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 40 of 113
Validation
Kit
S/N
D2450V2
735
D5GHzV2
1040
Frequency
(MHz)
1W Target
SAR-1g
(mW/g)
Measured
SAR-1g
(mW/g)
Measured
SAR-1g
normalized to
1W (mW/g)
Deviation
(%)
Measured
Date
2450
Body
50.6
12.8
51.2
1.19%
May. 08, 2018
5200
Body
74.2
7.24
72.4
-2.43%
May. 09, 2018
5300
Body
76.8
7.75
77.5
0.91%
May. 10, 2018
5600
Body
80
7.96
79.6
-0.50%
May. 11, 2018
5800
Body
76.9
7.43
74.3
-3.38%
May. 14, 2018
Table 1. Results of system verification
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 41 of 113
1.10 Tissue Simulant Fluid for the Frequency Band
The dielectric properties for this Head-simulant fluid were measured by using the
Agilent Model 85070E Dielectric Probe (rates frequency band 200 MHz to 20 GHz)
in conjunction with Network Analyzer.
All dielectric parameters of tissue simulates were measured within 24 hours of SAR
measurements. The measured conductivity and permittivity are all within ± 5% of
the target values.
The depth of the tissue simulant in the flat section of the phantom was ≥ 15 cm ± 5
mm (Frequency ≤3G) or ≥ 10 cm ± 5 mm (Frequency >3G) during all tests. (Fig. 2)
Tissue
Type
Measurement
Date
Measured
Frequency
(MHz)
Target
Dielectric
Constant,
εr
Target
Conductivity,
σ (S/m)
Measured
Dielectric
Constant,
εr
Measured
Conductivity,
σ (S/m)
% dev εr
% dev σ
2402
52.764
1.904
52.885
1.939
-0.23%
-1.83%
2417
52.744
1.918
52.814
1.962
-0.13%
-2.27%
2437
52.717
1.938
52.739
1.986
-0.04%
-2.50%
2441
52.712
1.941
52.745
1.993
-0.06%
-2.66%
2450
52.700
1.950
52.699
2.006
0.00%
-2.87%
2457
52.691
1.960
52.670
2.016
0.04%
-2.86%
2480
52.662
1.993
52.576
2.047
0.16%
-2.73%
5190
49.028
5.288
49.728
5.144
-1.43%
2.72%
5200
49.014
5.299
49.568
5.141
-1.13%
2.99%
5220
48.987
5.323
49.548
5.187
-1.14%
2.55%
5230
48.974
5.334
49.578
5.169
-1.23%
3.10%
5240
48.960
5.346
49.679
5.207
-1.47%
2.60%
5260
48.933
5.369
49.619
5.177
-1.40%
3.58%
5270
48.919
5.381
49.460
5.285
-1.11%
1.78%
5280
48.906
5.393
49.370
5.273
-0.95%
2.22%
5300
48.879
5.416
49.301
5.258
-0.86%
2.92%
5310
48.865
5.428
49.201
5.296
-0.69%
2.43%
5320
48.851
5.439
49.312
5.310
-0.94%
2.38%
5510
48.594
5.661
48.638
5.600
-0.09%
1.08%
5530
48.566
5.685
48.598
5.639
-0.07%
0.80%
5550
48.539
5.708
48.529
5.675
0.02%
0.58%
5600
48.471
5.766
48.560
5.759
-0.18%
0.13%
5670
48.376
5.848
48.173
5.874
0.42%
-0.44%
5690
48.349
5.872
48.293
5.885
0.12%
-0.23%
5710
48.322
5.895
47.974
5.931
0.72%
-0.61%
5755
48.261
5.947
47.980
5.949
0.58%
-0.03%
5775
48.234
5.971
48.001
6.034
0.48%
-1.06%
5795
48.207
5.994
47.407
6.260
1.66%
-4.43%
5800
48.200
6.000
47.917
5.991
0.59%
0.15%
May. 08, 2018
May. 09, 2018
Body
May. 10, 2018
May. 11, 2018
May. 14, 2018
Table 2. Dielectric Parameters of Tissue Simulant Fluid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 42 of 113
The composition of the tissue simulating liquid:
Ingredient
Frequency
(MHz)
Mode
2450M
Body
DGMBE
Water
301.7ml 698.3ml
Total
Preventol
Salt
Cellulose Sugar amount
D-7
─
─
─
─
1.0L(Kg)
Body Simulating Liquids for 5 GHz, Manufactured by SPEAG:
Ingredients
Water
Esters, Emulsifiers, Inhibitors
Sodium and Salt
(% by weight)
60-80
20-40
0-1.5
Table 3. Recipes for Tissue Simulating Liquid
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 43 of 113
1.11 Evaluation Procedures
The entire evaluation of the spatial peak values is performed within the
Post-processing engine (SEMCAD). The system always gives the maximum
values for the 1 g and 10 g cubes. The algorithm to find the cube with highest
averaged SAR is divided into the following stages:
1. The extraction of the measured data (grid and values) from the Zoom Scan.
2. The calculation of the SAR value at every measurement point based on all
stored data (A/D values and measurement parameters)
3. The generation of a high-resolution mesh within the measured volume
4. The interpolation of all measured values from the measurement grid to the
high-resolution grid
5. The extrapolation of the entire 3-D field distribution to the phantom surface
over the distance from sensor to surface
6. The calculation of the averaged SAR within masses of 1g and 10g.
The probe is calibrated at the center of the dipole sensors that is located 1 to
2.7mm away from the probe tip. During measurements, the probe stops shortly
above the phantom surface, depending on the probe and the surface detecting
system. Both distances are included as parameters in the probe configuration file.
The software always knows exactly how far away the measured point is from the
surface. As the probe cannot directly measure at the surface, the values between
the deepest measured point and the surface must be extrapolated. The angle
between the probe axis and the surface normal line is less than 30 degree.
In the Area Scan, the gradient of the interpolation function is evaluated to find all
the extreme of the SAR distribution. The uncertainty on the locations of the
extreme is less than 1/20 of the grid size. Only local maximum within –2 dB of the
global maximum are searched and passed for the Cube Scan measurement. In
the Cube Scan, the interpolation function is used to extrapolate the Peak SAR
from the lowest measurement points to the inner phantom surface (the
extrapolation distance). The uncertainty increases with the extrapolation distance.
To keep the uncertainty within 1% for the 1 g and 10 g cubes, the extrapolation
distance should not be larger than 5mm.
The maximum search is automatically performed after each area scan
measurement. It is based on splines in two or three dimensions. The procedure
can find the maximum for most SAR distributions even with relatively large grid
spacing. After the area scanning measurement, the probe is automatically moved
to a position at the interpolated maximum. The following scan can directly use this
position for reference, e.g., for a finer resolution grid or the cube evaluations. The
1g and 10g peak evaluations are only available for the predefined cube 7x7x7
scans. The routines are verified and optimized for the grid dimensions used in
these cube measurements.
The measured volume of 30x30x30mm contains about 30g of tissue.
The first procedure is an extrapolation (incl. Boundary correction) to get the points
between the lowest measured plane and the surface. The next step uses 3D
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 44 of 113
interpolation to get all points within the measured volume. In the last step, a 1g
cube is placed numerically into the volume and its averaged SAR is calculated.
This cube is the moved around until the highest averaged SAR is found. If the
highest SAR is found at the edge of the measured volume, the system will issue a
warning: higher SAR values might be found outside of the measured volume. In
that case the cube measurement can be repeated, using the new interpolated
maximum as the center.
1.12 Probe Calibration Procedures
For the calibration of E-field probes in lossy liquids, an electric field with an
accurately known field strength must be produced within the measured liquid. For
standardization purposes it would be desirable if all measurements which are
necessary to assess the correct field strength would be traceable to standardized
measurement procedures. In the following two different calibration techniques are
summarized:
1.12.1 Transfer Calibration with Temperature Probes
In lossy liquids the specific absorption rate (SAR) is related both to the
electric field (  ) and the temperature gradient ( T /  t ) in the liquid.
T
SAR = C
t
whereby σ is the conductivity, ρ the density and c the heat capacity of the
liquid.
Hence, the electric field in lossy liquid can be measured indirectly by
measuring the temperature gradient in the liquid. Non-disturbing
temperature probes (optical probes or thermistor probes with resistive lines)
with high spatial resolution (<1-2 mm) and fast reaction time (<1 s) are
available and can be easily calibrated with high precision [1]. The setup
and the exciting source have no influence on the calibration; only the
relative positioning uncertainties of the standard temperature probe and the
E-field probe to be calibrated must be considered. However, several
problems limit the available accuracy of probe calibrations with
temperature probes:
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 45 of 113
 The temperature gradient is not directly measurable but must be
evaluated from temperature measurements at different time steps.
Special precaution is necessary to avoid measurement errors caused by
temperature gradients due to energy equalizing effects or convection
currents in the liquid. Such effects cannot be completely avoided, as the
measured field itself destroys the thermal equilibrium in the liquid. With a
careful setup these errors can be kept small.
 The measured volume around the temperature probe is not well defined.
It is difficult to calculate the energy transfer from a surrounding gradient
temperature field into the probe. These effects must be considered,
since temperature probes are calibrated in liquid with homogeneous
temperatures. There is no traceable standard for temperature rise
measurements.
 The calibration depends on the assessment of the specific density, the
heat capacity and the conductivity of the medium. While the specific
density and heat capacity can be measured accurately with
standardized procedures (~ 2% for c; much better for ρ) , there is no
standard for the measurement of the conductivity. Depending on the
method and liquid, the error can well exceed ±5%.
 Temperature rise measurements are not very sensitive and therefore
are often performed at a higher power level than the E-field
measurements. The nonlinearities in the system (e.g., power
measurements, different components, etc.) must be considered.
Considering these problems, the possible accuracy of the calibration of
E-field probes with temperature gradient measurements in a carefully
designed setup is about ±10% (RSS) [2]. Recently, a setup which is a
combination of the waveguide techniques and the thermal measurements
was presented in [3]. The estimated uncertainty of the setup is ±5% (RSS)
when the same liquid is used for the calibration and for actual
measurements and ±7-9% (RSS) when not, which is in good agreement
with the estimates given in [2].
1.12.2 Calibration with Analytical Fields
In this method a technical setup is used in which the field can be calculated
analytically from measurements of other physical magnitudes (e.g., input
power). This corresponds to the standard field method for probe calibration
in air; however, there is no standard defined for fields in lossy liquids.
When using calculated fields in lossy liquids for probe calibration, several
points must be considered in the assessment of the uncertainty:
 The setup must enable accurate determination of the incident power.
 The accuracy of the calculated field strength will depend on the
assessment of the dielectric parameters of the liquid.
 Due to the small wavelength in liquids with high permittivity, even small
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 46 of 113
setups might be above the resonant cutoff frequencies. The field
distribution in the setup must be carefully checked for conformity with the
theoretical field distribution.
References
1.
2.
3.
N. Kuster, Q. Balzano, and J.C. Lin, Eds., Mobile Communications
Safety, Chapman & Hall, London, 1997.
K. Meier, M. Burkhardt, T. Schmid, and N. Kuster, \Broadband
calibration of E-field probes in lossy media", IEEE Transactions on
Microwave Theory and Techniques, vol. 44, no. 10, pp. 1954{1962,
Oct. 1996.
K. Jokela, P. Hyysalo, and L. Puranen, \Calibration of specific
absorption rate (SAR) probes in waveguide at 900 MHz", IEEE
Transactions on Instrumentation and Measurements, vol. 47, no. 2, pp.
432{438, Apr. 1998.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 47 of 113
1.13 Test Standards and Limits
According to FCC 47CFR §2.1093(d) The limits to be used for evaluation are
based generally on criteria published by the American National Standards
Institute (ANSI) for localized specific absorption rate (‘‘SAR’’) in Section 4.2 of
‘‘IEEE Standard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300 GHz,’’ ANSI/IEEE C95.1, By the
Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017.
These criteria for SAR evaluation are similar to those recommended by the
National Council on Radiation Protection and Measurements (NCRP) in
‘‘Biological Effects and Exposure Criteria for Radio frequency Electromagnetic
Fields,’’ NCRP Report No. 86, Section 17.4.5. Copyright NCRP, 1986, Bethesda,
Maryland 20814. SAR is a measure of the rate of energy absorption due to
exposure to an RF transmitting source. SAR values have been related to
threshold levels for potential biological hazards. The criteria to be used are
specified in paragraphs (d)(1) and (d)(2) of this section and shall apply for
portable devices transmitting in the frequency range from 100 kHz to 6 GHz.
Portable devices that transmit at frequencies above 6 GHz are to be evaluated in
terms of the MPE limits specified in § 1.1310 of this chapter. Measurements and
calculations to demonstrate compliance with MPE field strength or power density
limits for devices operating above 6 GHz should be made at a minimum distance
of 5 cm from the radiating source.
(1) Limits for Occupational/Controlled exposure: 0.4 W/kg as averaged over the
whole-body and spatial peak SAR not exceeding 8 W/kg as averaged over
any 1 gram of tissue (defined as a tissue volume in the shape of a cube).
Exceptions are the hands, wrists, feet and ankles where the spatial peak
SAR shall not exceed 20 W/kg, as averaged over an 10 grams of tissue
(defined as a tissue volume in the shape of a cube).
(2) Occupational/Controlled limits apply when persons are exposed as a
consequence of their employment provided these persons are fully aware of
and exercise control over their exposure. Awareness of exposure can be
accomplished by use of warning labels or by specific training or education
through appropriate means, such as an RF safety program in a work
environment.
(3) Limits for General Population/Uncontrolled exposure: 0.08 W/kg as
averaged over the whole-body and spatial peak SAR not exceeding 1.6
W/kg as averaged over any 1 gram of tissue (defined as a tissue volume in
the shape of a cube). Exceptions are the hands, wrists, feet and ankles
where the spatial peak SAR shall not exceed 4 W/kg, as averaged over any
10 grams of tissue (defined as a tissue volume in the shape of a cube).
General Population/Uncontrolled limits apply when the general public may
be exposed, or when persons that are exposed as a consequence of their
employment may not be fully aware of the potential for exposure or do not
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 48 of 113
exercise control over their exposure. Warning labels placed on consumer
devices such as cellular telephones will not be sufficient reason to allow
these devices to be evaluated subject to limits for occupational/controlled
exposure in paragraph (d)(1) of this section. (Table 4.)
Human Exposure
Spatial Peak SAR
(Brain)
Spatial Average SAR
(Whole Body)
Spatial Peak SAR
(Hands/Feet/Ankle/Wrist)
Uncontrolled
Environment
General Population
Controlled Environment
Occupational
1.60 W/kg
8.00 W/kg
0.08 W/kg
0.40 W/kg
4.00 W/kg
20.00 W/kg
Table 4. RF exposure limits
Notes:
1. Uncontrolled environments are defined as locations where there is potential exposure of
individuals who have no knowledge or control of their potential exposure.
2. Controlled environments are defined as locations where there is potential exposure of
individuals who have knowledge of their potential exposure and can exercise control
over their exposure.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 49 of 113
2. Summary of Results
WLAN Antenna (reduced power)
Antenna
Mode
WLAN802.11 b
WLAN802.11 n(40M) 5.2G
Main
WLAN802.11 n(40M) 5.3G
WLAN802.11 ac(80M) 5.6G
WLAN802.11 ac(80M) 5.8G
Averaged SAR over 1g
(W/kg)
Position
Distance
(mm)
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Measured
Reported
Back side
2437
20.00
19.98
100.46%
0.052
0.052
Top side
2437
20.00
19.98
100.46%
0.310
0.311
55
Plot
page
Left side
2437
20.00
19.98
100.46%
0.239
0.240
Back side
46
5230
16.00
15.97
100.69%
0.041
0.041
Top side
46
5230
16.00
15.97
100.69%
0.457
0.460
56
Left side
46
5230
16.00
15.97
100.69%
0.136
0.137
Back side
54
5270
16.00
15.94
101.39%
0.041
0.042
Top side
54
5270
16.00
15.94
101.39%
0.467
0.473
57
Left side
54
5270
16.00
15.94
101.39%
0.132
0.134
Back side
106
5530
16.00
15.97
100.69%
0.040
0.040
Top side
106
5530
16.00
15.97
100.69%
0.477
0.480
58
Left side
106
5530
16.00
15.97
100.69%
0.171
0.172
Back side
155
5775
16.00
15.98
100.46%
0.037
0.037
Top side
155
5775
16.00
15.98
100.46%
0.553
0.556
59
Left side
155
5775
16.00
15.98
100.46%
0.189
0.190
WLAN Aux Antenna (reduced power)
Antenna
Mode
WLAN802.11 b
Bluetooth (GFSK)
WLAN802.11 n(40M) 5.2G
Aux
WLAN802.11 n(40M) 5.3G
WLAN802.11 ac(80M) 5.6G
WLAN802.11 ac(80M) 5.8G
Averaged SAR over 1g
(W/kg)
Position
Distance
(mm)
CH
Freq.
(MHz)
Max. Rated Avg.
Power + Max.
Tolerance (dBm)
Measured
Avg. Power
(dBm)
Scaling
Measured
Reported
Back side
2437
20.00
19.99
100.23%
0.101
0.101
Top side
2437
20.00
19.99
100.23%
0.559
0.560
60
Back side
78
2480
11.50
10.83
116.68%
0.006
0.007
Top side
78
2480
11.50
10.83
116.68%
0.053
0.062
61
Back side
38
5190
16.00
15.97
100.69%
0.070
0.070
Top side
38
5190
16.00
15.97
100.69%
0.352
0.354
62
Back side
54
5270
16.00
15.92
101.86%
0.061
0.062
Top side
54
5270
16.00
15.92
101.86%
0.367
0.374
63
Back side
138
5690
16.00
15.94
101.39%
0.053
0.054
Top side
138
5690
16.00
15.94
101.39%
0.324
0.329
64
Back side
155
5775
16.00
15.93
101.62%
0.056
0.057
Top side
155
5775
16.00
15.93
101.62%
0.306
0.311
65
Plot
page
Note:
10
Scaling =
Reported SAR = measured SAR * (scaling)
Where P2 is maximum specified power, P1 is measured conducted power
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 50 of 113
3. Simultaneous Transmission Analysis
Simultaneous Transmission Scenarios:
Simultaneous Transmit Configurations
Body
2.4GHz WLAN MIMO
Yes
5GHz WLAN MIMO
Yes
BT + 2.4GHz WLAN Main
Yes
BT + 5GHz WLAN Main
Yes
Note:
1. Bluetooth and WLAN Aux share the same antenna path, and BT can transmit with WLAN Main
simultaneously.
2. For 2.4/5GHz WLAN Main and Aux antennas, the maximum output power of each antenna during
simultaneous transmission is the same with that used in standalone transmission, and we used the sum
of 1-g SAR provision in KDB447498D01 to exclude the simultaneous transmitted SAR measurement.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 51 of 113
3.1 Estimated SAR calculation
According to KDB447498 D01v06 – When standalone SAR test exclusion applies to
an antenna that transmits simultaneously with other antennas, the standalone SAR
must be estimated according to following to determine simultaneous transmission
SAR test exclusion:
Estimated SAR
Max. tune up power mW
Min. test separation distance mm
f GHz
7.5
If the minimum test separation distance is < 5mm, a distance of 5mm is used for
estimated SAR calculation. When the test separation distance is >50mm, the
0.4W/kg is used for SAR-1g.
Mode / Band
position
test separation distance
Estimated SAR(W/kg)
BT
left side of tablet mode
> 50mm
0.4
WLAN Aux
left side of tablet mode
> 50mm
0.4
3.1 SPLSR evaluation and analysis
Per KDB447498D01, when the sum of SAR is larger than the limit, SAR test
exclusion is determined by the SAR sum to peak location separation ratio(SPLSR).
The simultaneous transmitting antennas in each operating mode and exposure
condition combination must be considered one pair at a time to determine the SAR
to peak location separation ratio to qualify for test exclusion.
The ratio is determined by (SAR1 + SAR2)^1.5/Ri, rounded to two decimal digits,
and must be ≤ 0.04 for all antenna pairs in the configuration to qualify for 1-g SAR
test exclusion.
SAR1 and SAR2 are the highest reported or estimated SAR for each antenna in the
pair, and Ri is the separation distance between the peak SAR locations for the
antenna pair in mm.
When standalone test exclusion applies, SAR is estimated; the peak location is
assumed to be at the feed-point or geometric center of the antenna.
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 52 of 113
2.4 GHz WLAN MIMO (Tablet mode with reduced power)
No.
Conditions
2.4 GHz WLAN Main
+ WLAN Aux
Position
Max.
Max.
WLAN Main WLAN Aux
SAR Sum
SPLSR
Back side
0.052
0.101
0.153
ΣSAR<1.6,
Not required
Top side
0.311
0.560
0.871
ΣSAR<1.6,
Not required
Left side
0.240
0.400
0.640
ΣSAR<1.6,
Not required
SAR Sum
SPLSR
5 GHz WLAN MIMO (Tablet mode with reduced power)
No.
Conditions
5 GHz WLAN Main
+ WLAN Aux
Position
Max.
Max.
WLAN Main WLAN Aux
Back side
0.042
0.070
0.112
ΣSAR<1.6,
Not required
Top side
0.556
0.374
0.93
ΣSAR<1.6,
Not required
Left side
0.190
0.400
0.59
ΣSAR<1.6,
Not required
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 53 of 113
BT+ 2.4GHz WLAN Main (Tablet mode with reduced power)
No.
Conditions
2.4 GHz WLAN Main
+ BT
Position
Max.
WLAN Main
BT
SAR Sum
SPLSR
Back side
0.052
0.007
0.059
ΣSAR<1.6,
Not required
Top side
0.311
0.062
0.373
ΣSAR<1.6,
Not required
Left side
0.240
0.400
0.64
ΣSAR<1.6,
Not required
BT+ 5GHz WLAN Main (Tablet mode with reduced power)
No.
Conditions
5 GHz WLAN Main
+ BT
Position
Main
BT
SAR Sum
SPLSR
Back side
0.042
0.007
0.049
ΣSAR<1.6,
Not required
Top side
0.556
0.062
0.618
ΣSAR<1.6,
Not required
Left side
0.190
0.400
0.59
ΣSAR<1.6,
Not required
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 54 of 113
4. Instruments List
Manufacturer
Device
Type
Serial number
Date of last Date of next
calibration calibration
SPEAG
Dosimetric
E-Field
Probe
EX3DV4
7466
Jul.04,2017 Jul.03,2018
D2450V2
735
Dec.15,2017 Dec.14,2018
SPEAG
System
Validation
Dipole
D5GHzV2
1040
Jul.13,2017 Jul.12,2018
Mar.16,2018 Mar.15,2019
SPEAG
Data acquisition
Electronics
DAE4
547
SPEAG
Software
DASY 52
V52.8.8
N/A
SPEAG
Phantom
ELI
N/A
Network
E5071C
Analyzer
Dielectric
85070E
Probe Kit
Dual-directional
772D
coupler
Signal
N5181A
Generator
Agilent
Agilent
Agilent
Agilent
Agilent
Power Meter
E4417A
Agilent
Power Sensor
E9301H
Calibration
not required
Calibration
not required
Calibration
not required
Calibration
not required
MY46107530 Feb.26,2018 Feb.25,2019
MY44300677
Calibration Calibration
not required not required
MY46151242 Jul.11,2017 Jul.10,2018
MY50144143 Mar.15,2018 Mar.14,2019
MY52240003 Dec.21,2017 Dec.20,2018
MY52200003 Dec.21,2017 Dec.20,2018
MY52200004 Dec.21,2017 Dec.20,2018
Changzhou
Xinwang
Digital
thermometer
PT1
EC14011603-1 Jun.05,2017 Jun.04,2018
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 55 of 113
5. Measurements
Date: 2018/5/8
WLAN 802.11b_Body_Top side_CH 6_0mm_Main
Communication System: WLAN 2.45G; Frequency: 2437 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2437 MHz; σ = 1.986 S/m; εr = 52.739; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.4°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(7.94, 7.94, 7.94); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (71x101x1): Interpolated grid: dx=12 mm, dy=12 mm
Maximum value of SAR (interpolated) = 0.459 W/kg
Configuration/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 0.7320 V/m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 0.631 W/kg
SAR(1 g) = 0.310 W/kg; SAR(10 g) = 0.144 W/kg
Maximum value of SAR (measured) = 0.465 W/kg
0 dB = 0.465 W/kg = -3.32 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 56 of 113
Date: 2018/5/9
WLAN 802.11n(40M) 5.2G_Body_Top side_CH 46_0mm_Main
Communication System: WLAN 5G; Frequency: 5230 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5230 MHz; σ = 5.169 S/m; εr = 49.579; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.3°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.2, 5.2, 5.2); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.830 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 1.323 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 1.84 W/kg
SAR(1 g) = 0.457 W/kg; SAR(10 g) = 0.162 W/kg
Maximum value of SAR (measured) = 0.894 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 1: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 1.323 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 1.70 W/kg
SAR(1 g) = 0.389 W/kg; SAR(10 g) = 0.129 W/kg
Maximum value of SAR (measured) = 0.775 W/kg
0 dB = 0.775 W/kg = -1.11 dBW/kg
Date: 2018/5/10
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 57 of 113
WLAN 802.11n(40M) 5.3G_Body_Top side_CH 54_0mm_Main
Communication System: WLAN 5G; Frequency: 5270 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5270 MHz; σ = 5.285 S/m; εr = 49.46; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.1, 5.1, 5.1); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.853 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 1.155 V/m; Power Drift = 0.18 dB
Peak SAR (extrapolated) = 1.86 W/kg
SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.165 W/kg
Maximum value of SAR (measured) = 0.917 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 1: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 1.155 V/m; Power Drift = 0.18 dB
Peak SAR (extrapolated) = 1.79 W/kg
SAR(1 g) = 0.400 W/kg; SAR(10 g) = 0.131 W/kg
Maximum value of SAR (measured) = 0.806 W/kg
0 dB = 0.806 W/kg = -0.94 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 58 of 113
Date: 2018/5/11
WLAN 802.11ac(80M) 5.6G_Body_Top side_CH 106_0mm_Main
Communication System: WLAN 5G; Frequency: 5530 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5530 MHz; σ = 5.639 S/m; εr = 48.598; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.6°C; Liquid temperature: 21.2°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.27, 4.27, 4.27); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.835 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 0.8380 V/m; Power Drift = 0.16 dB
Peak SAR (extrapolated) = 1.93 W/kg
SAR(1 g) = 0.477 W/kg; SAR(10 g) = 0.169 W/kg
Maximum value of SAR (measured) = 0.965 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 1: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 0.8380 V/m; Power Drift = 0.16 dB
Peak SAR (extrapolated) = 2.06 W/kg
SAR(1 g) = 0.445 W/kg; SAR(10 g) = 0.138 W/kg
Maximum value of SAR (measured) = 0.962 W/kg
0 dB = 0.962 W/kg = -0.17 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 59 of 113
Date: 2018/5/14
WLAN 802.11ac(80M) 5.8G_Body_Top side_CH 155_0mm_Main
Communication System: WLAN 5G; Frequency: 5775 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5775 MHz; σ = 6.034 S/m; εr = 48.001; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.5°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.48, 4.48, 4.48); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 1.24 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 1.282 V/m; Power Drift = -0.19 dB
Peak SAR (extrapolated) = 2.79 W/kg
SAR(1 g) = 0.553 W/kg; SAR(10 g) = 0.152 W/kg
Maximum value of SAR (measured) = 1.25 W/kg
0 dB = 1.25 W/kg = 0.98 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 60 of 113
Date: 2018/5/8
WLAN 802.11b_Body_Top side_CH 6_0mm_Aux
Communication System: WLAN 2.45G; Frequency: 2437 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2437 MHz; σ = 1.986 S/m; εr = 52.739; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.4°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(7.94, 7.94, 7.94); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (71x101x1): Interpolated grid: dx=12 mm, dy=12 mm
Maximum value of SAR (interpolated) = 0.856 W/kg
Configuration/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 10.73 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.15 W/kg
SAR(1 g) = 0.559 W/kg; SAR(10 g) = 0.260 W/kg
Maximum value of SAR (measured) = 0.849 W/kg
0 dB = 0.849 W/kg = -0.71 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 61 of 113
Date: 2018/5/8
Bluetooth(GFSK)_Body_Top side_CH 78_0mm_Aux
Communication System: Bluetooth; Frequency: 2480 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2480 MHz; σ = 2.047 S/m; εr = 52.576; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.4°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(7.94, 7.94, 7.94); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (71x101x1): Interpolated grid: dx=12 mm, dy=12 mm
Maximum value of SAR (interpolated) = 0.0811 W/kg
Configuration/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 3.181 V/m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 0.112 W/kg
SAR(1 g) = 0.053 W/kg; SAR(10 g) = 0.025 W/kg
Maximum value of SAR (measured) = 0.0799 W/kg
0 dB = 0.0799 W/kg = -10.97 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 62 of 113
Date: 2018/5/9
WLAN 802.11n(40M) 5.2G_Body_Top side_CH 38_0mm_Aux
Communication System: WLAN 5G; Frequency: 5190 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5190 MHz; σ = 5.144 S/m; εr = 49.727; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.3°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.2, 5.2, 5.2); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.659 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 4.991 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 1.34 W/kg
SAR(1 g) = 0.352 W/kg; SAR(10 g) = 0.133 W/kg
Maximum value of SAR (measured) = 0.673 W/kg
0 dB = 0.673 W/kg = -1.72 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 63 of 113
Date: 2018/5/10
WLAN 802.11n(40M) 5.3G_Body_Top side_CH 54_0mm_Aux
Communication System: WLAN 5G; Frequency: 5270 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5270 MHz; σ = 5.285 S/m; εr = 49.46; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.1, 5.1, 5.1); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.707 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 4.462 V/m; Power Drift = 0.17 dB
Peak SAR (extrapolated) = 1.42 W/kg
SAR(1 g) = 0.367 W/kg; SAR(10 g) = 0.140 W/kg
Maximum value of SAR (measured) = 0.686 W/kg
0 dB = 0.686 W/kg = -1.63 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 64 of 113
Date: 2018/5/11
WLAN 802.11ac(80M) 5.6G_Body_Top side_CH 138_0mm_Aux
Communication System: WLAN 5G; Frequency: 5690 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5690 MHz; σ = 5.885 S/m; εr = 48.293; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.6°C; Liquid temperature: 21.2°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.27, 4.27, 4.27); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.632 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 5.379 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 1.43 W/kg
SAR(1 g) = 0.324 W/kg; SAR(10 g) = 0.107 W/kg
Maximum value of SAR (measured) = 0.647 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 1: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 5.379 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 1.02 W/kg
SAR(1 g) = 0.245 W/kg; SAR(10 g) = 0.094 W/kg
Maximum value of SAR (measured) = 0.469 W/kg
0 dB = 0.469 W/kg = -3.29 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 65 of 113
Date: 2018/5/14
WLAN 802.11ac(80M) 5.8G_Body_Top side_CH 155_0mm_Aux
Communication System: WLAN 5G; Frequency: 5775 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5775 MHz; σ = 6.034 S/m; εr = 48.001; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.5°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.48, 4.48, 4.48); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Area Scan (81x121x1): Interpolated grid: dx=10 mm, dy=10 mm
Maximum value of SAR (interpolated) = 0.673 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 6.096 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 1.51 W/kg
SAR(1 g) = 0.306 W/kg; SAR(10 g) = 0.108 W/kg
Maximum value of SAR (measured) = 0.651 W/kg
Configuration/Zoom Scan (7x7x12)/Cube 1: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 6.096 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 1.22 W/kg
SAR(1 g) = 0.274 W/kg; SAR(10 g) = 0.097 W/kg
Maximum value of SAR (measured) = 0.541 W/kg
0 dB = 0.541 W/kg = -2.67 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 66 of 113
6.SAR System Performance Verification
Date: 2018/5/8
Dipole 2450 MHz_SN:735
Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2450 MHz; σ = 2.006 S/m; εr = 52.699; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.4°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(7.94, 7.94, 7.94); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Pin=250mW/Area Scan (61x91x1): Interpolated grid: dx=12 mm,
dy=12 mm
Maximum value of SAR (interpolated) = 20.6 W/kg
Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 101.0 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 26.6 W/kg
SAR(1 g) = 12.8 W/kg; SAR(10 g) = 5.93 W/kg
Maximum value of SAR (measured) = 19.6 W/kg
0 dB = 19.6 W/kg = 12.93 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 67 of 113
Date: 2018/5/9
Dipole 5200 MHz_SN:1040
Communication System: CW; Frequency: 5200 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 5.141 S/m; εr = 49.568; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.3°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.2, 5.2, 5.2); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Pin=100mW/Area Scan (61x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 15.6 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 56.01 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 28.7 W/kg
SAR(1 g) = 7.24 W/kg; SAR(10 g) = 2.05 W/kg
Maximum value of SAR (measured) = 15.1 W/kg
0 dB = 15.1 W/kg = 11.80 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 68 of 113
Date: 2018/5/10
Dipole 5300 MHz_SN:1040
Communication System: CW; Frequency: 5300 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 5.258 S/m; εr = 49.301; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.8°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(5.1, 5.1, 5.1); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Pin=100mW/Area Scan (61x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 16.4 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 47.84 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 32.6 W/kg
SAR(1 g) = 7.75 W/kg; SAR(10 g) = 2.17 W/kg
Maximum value of SAR (measured) = 16.5 W/kg
0 dB = 16.5 W/kg = 12.17 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 69 of 113
Date: 2018/5/11
Dipole 5600 MHz_SN:1040
Communication System: CW; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.759 S/m; εr = 48.56; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.6°C; Liquid temperature: 21.2°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.27, 4.27, 4.27); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Pin=100mW/Area Scan (61x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 18.0 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 57.62 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 34.3 W/kg
SAR(1 g) = 7.96 W/kg; SAR(10 g) = 2.26 W/kg
Maximum value of SAR (measured) = 16.8 W/kg
0 dB = 16.8 W/kg = 12.26 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 70 of 113
Date: 2018/5/14
Dipole 5800 MHz_SN:1040
Communication System: CW; Frequency: 5800 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5800 MHz; σ = 5.991 S/m; εr = 47.917; ρ = 1000 kg/m3
Phantom section: Flat Section
Ambient temperature: 22.1°C; Liquid temperature: 21.5°C
DASY5 Configuration:
 Probe: EX3DV4 - SN7466; ConvF(4.48, 4.48, 4.48); Calibrated: 2017/7/4;
 Sensor-Surface: 2mm (Mechanical Surface Detection)
 Electronics: DAE4 Sn547; Calibrated: 2018/3/16
 Phantom: Body
 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Configuration/Pin=100mW/Area Scan (61x91x1): Interpolated grid: dx=10 mm,
dy=10 mm
Maximum value of SAR (interpolated) = 16.0 W/kg
Configuration/Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 54.06 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 33.1 W/kg
SAR(1 g) = 7.43 W/kg; SAR(10 g) = 2.1 W/kg
Maximum value of SAR (measured) = 16.3 W/kg
0 dB = 16.3 W/kg = 12.12 dBW/kg
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 71 of 113
7. DAE & Probe Calibration Certificate
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 72 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 73 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 74 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 75 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 76 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 77 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 78 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 79 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 80 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 81 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 82 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 83 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 84 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 85 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 86 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 87 of 113
8. Uncertainty Budget
Measurement Uncertainty evaluation template for DUT SAR test (3-6G)
Source of Uncertainty
Tolerance/ Probability
Uncertainty Distributio
Div
Div Value
ci (1g)
h=c * f / e
i=c * g / e
ci (10g)
Standard
uncertainty
Standard
uncertainty
vi, or Veff
Measurement system
Probe calibration
6.55%
6.55%
6.55%
∞
Isotropy , Axial
3.50%
√3
1.732
2.02%
2.02%
∞
Isotropy, Hemispherical
9.60%
√3
1.732
5.54%
5.54%
∞
Modulation Response
2.40%
√3
1.732
1.40%
1.40%
∞
Boundary Effect
1.00%
√3
1.732
0.58%
0.58%
∞
Linearity
4.70%
√3
1.732
2.71%
2.71%
∞
Detection Limits
1.00%
√3
1.732
0.58%
0.58%
∞
Readout Electronics
0.30%
0.30%
0.30%
∞
Response time
0.80%
√3
1.732
0.46%
0.46%
∞
Integration Time
2.60%
√3
1.732
1.50%
1.50%
∞
1.75%
√3
1.732
1.01%
1.01%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
0.40%
√3
1.732
0.23%
0.23%
∞
2.90%
√3
1.732
1.67%
1.67%
∞
Post-processing
1.00%
√3
1.732
0.58%
0.58%
∞
Max SAR Eval
1.00%
√3
1.732
0.58%
0.58%
∞
Test sample positioning
2.90%
2.90%
2.90%
M-1
Device Holder Uncertainty
3.60%
3.60%
3.60%
M-1
Drift of output power
5.00%
√3
1.732
2.89%
2.89%
∞
Phantom Uncertainty
4.00%
√3
1.732
2.31%
2.31%
∞
Liquid permittivity (mea.)
1.66%
0.64
0.43
1.06%
0.71%
-4.43%
0.6
0.49
-2.66%
-2.17%
12.06%
11.93%
24.12%
23.86%
Measurement drift
(class A evaluation)
RF ambient condition noise
RF ambient conditions reflections
Probe positioner
Mechanical restrictions
Probe Positioning with
respect to phantom shell
Test Sample related
Phantom and Setup
Liquid Conductivity (mea.)
Combined standard
uncertainty
Expant uncertainty (95%
confidence interval), K=2
RSS
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 88 of 113
Measurement Uncertainty evaluation template for DUT SAR test (0.3-3G)
Source of Uncertainty
Tolerance/ Probability
Uncertainty Distributio
Div
Div Value
ci (1g)
h=c * f / e
i=c * g / e
ci (10g)
Standard
uncertainty
Standard
uncertainty
vi, or Veff
Measurement system
6.00%
6.00%
∞
√3
1.732
2.02%
2.02%
∞
√3
1.732
5.54%
5.54%
∞
2.40%
√3
1.732
1.40%
1.40%
∞
Boundary Effect
1.00%
√3
1.732
0.58%
0.58%
∞
Linearity
4.70%
√3
1.732
2.71%
2.71%
∞
Detection Limits
1.00%
√3
1.732
0.58%
0.58%
∞
Readout Electronics
0.30%
0.30%
0.30%
∞
Response time
0.80%
√3
1.732
0.46%
0.46%
∞
Integration Time
2.60%
√3
1.732
1.50%
1.50%
∞
1.75%
√3
1.732
1.01%
1.01%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
3.00%
√3
1.732
1.73%
1.73%
∞
0.40%
√3
1.732
0.23%
0.23%
∞
2.90%
√3
1.732
1.67%
1.67%
∞
Post-processing
1.00%
√3
1.732
0.58%
0.58%
∞
Max SAR Eval
1.00%
√3
1.732
0.58%
0.58%
∞
Test sample positioning
2.90%
2.90%
2.90%
M-1
Device Holder Uncertainty
3.60%
3.60%
3.60%
M-1
Drift of output power
5.00%
√3
1.732
2.89%
2.89%
∞
4.00%
√3
1.732
2.31%
2.31%
∞
Liquid permittivity (mea.)
-0.23%
0.64
0.43
-0.15%
-0.10%
Liquid Conductivity (mea.)
-2.87%
0.6
0.49
-1.72%
-1.41%
11.55%
11.49%
23.10%
22.99%
Probe calibration
6.00%
Isotropy , Axial
3.50%
Isotropy, Hemispherical
9.60%
Modulation Response
Measurement drift
(class A evaluation)
RF ambient condition noise
RF ambient conditions reflections
Probe positioner
Mechanical restrictions
Probe Positioning with
respect to phantom shell
Test Sample related
Phantom and Setup
Phantom Uncertainty
Combined standard
uncertainty
Expant uncertainty (95%
confidence interval), K=2
RSS
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 89 of 113
9. Phantom Description
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 90 of 113
10. System Validation from Original Equipment Supplier
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 91 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 92 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 93 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 94 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 95 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 96 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 97 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 98 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 99 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 100 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 101 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 102 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 103 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 104 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 105 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 106 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 107 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 108 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 109 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 110 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 111 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 112 of 113
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Report No. : E5/2018/50001
Page : 113 of 113
- End of report -
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.
除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format
documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined
therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The
Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot
be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號
t (886-2) 2299-3279
f (886-2) 2298-0488
www.tw.sgs.com
Member of SGS Group
Download: 8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Mirror Download [FCC.gov]8265NGWR Intel Dual Band Wireless-AC 8265 RF Exposure Info SAR Test Report Revised HP Inc.
Document ID3871610
Application IDG73xJPWLWVmGYbS3yfLvtQ==
Document DescriptionSAR Test Report Revised
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize187.42kB (2342727 bits)
Date Submitted2018-06-01 00:00:00
Date Available2018-05-30 00:00:00
Creation Date2018-06-01 11:47:13
Producing SoftwareAcrobat Distiller 17.0 (Windows)
Document Lastmod2018-06-01 11:47:44
Document TitleSAR Test Report Revised
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2018:06:01 11:47:13+08:00
Modify Date                     : 2018:06:01 11:47:44+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:06:01 11:47:44+08:00
Producer                        : Acrobat Distiller 17.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:a8a31988-4c3a-40b8-84c4-13fb750c4551
Instance ID                     : uuid:2cc791c1-0e11-445e-975b-ae86f2f04d23
Page Count                      : 113