FCC ID B94-QCNCM820D

C2PC: Integration of module into new host Brand/Model: HP/ HSN-I68C)

The highest reported SAR for body-worn, and simultaneous transmission exposure conditions are <0.10 W/kg, 0.47 W/kg respectively.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category.

Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.7 W/kg and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.73 W/kg and and 1.57 W/kg, respectively.

Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.11 W/kg and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.26 W/kg and and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category. Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.2 W/kg and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.13 W/kg and and 1.57 W/kg, respectively.

Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.09 W/kg and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.21 W/kg and and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category. Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.74 W/kg and and 1.57 W/kg, respectively. Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body and Simultaneous SAR values are 0.20 W/kg and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.49 W/kg and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

C2PC: Integration of module into new host Brand/Model: HP/ HSN-I68C)

The highest reported SAR values for, body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.62 W/kg, respectively. The highest reported power density is 0.59 W/m2

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category.

Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.60 W/kg, 4.11W/m2, 4.5W/m2 and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.50 W/kg, 3.25W/m2, 4.46W/m2, and and 1.57 W/kg, respectively.

Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.18 W/kg, 1.62W/m2, 3.6W/m2 and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.26 W/kg, 2.16W/m2, 3.93W/m2, and and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. Device must compliant indoor restrictions when connected to indoor low power AP.

C2PC: Integration of module into new host Brand/Model: HP/ HSN-I68C)

The highest reported SAR for body-worn, and simultaneous transmission exposure conditions are 0.21 W/kg, 0.68 W/kg respectively.

Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.60 W/kg, 4.11W/m2, 4.5W/m2 and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.50 W/kg, 3.25W/m2, 4.46W/m2, and and 1.57 W/kg, respectively.

Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.18 W/kg, 1.62W/m2, 3.6W/m2 and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.26 W/kg, 2.16W/m2, 3.93W/m2, and and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. Device must compliant indoor restrictions when connected to indoor low power AP.

C2PC: Integration of module into new host Brand/Model: HP/ HSN-I68C)

The highest reported SAR values for, body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.62 W/kg, respectively. The highest reported power density is 0.59 W/m2

C2PC: Integration of module into new host Brand/Model: HP/ HSN-I68C)

The highest reported SAR for body-worn, and simultaneous transmission exposure conditions are <0.10 W/kg, 0.68 W/kg respectively.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm for mobile device category. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 5mm and 18mm for portable device category.

Test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.60 W/kg, 4.11W/m2, 4.5W/m2 and 1.56 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.50 W/kg, 3.25W/m2, 4.46W/m2, and and 1.57 W/kg, respectively.

Test separation distance is 18mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.18 W/kg, 1.62W/m2, 3.6W/m2 and 0.41 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.26 W/kg, 2.16W/m2, 3.93W/m2, and and 0.71 W/kg, respectively.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes.